The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Remaining Useful Life Estimation Based on a Nonlinear Diffusion Degradation Process
Abstract
Remaining useful life estimation is central to the prognostics and health management of systems, particularly for safety-critical systems, and systems that are very expensive. We present a non-linear model to estimate the remaining useful life of a system based on monitored degradation signals. A diffusion process with a nonlinear drift coefficient with a constant threshold was transformed to a linear model with a variable threshold to characterize the dynamics and nonlinearity of the degradation process. This new diffusion process contrasts sharply with existing models that use a linear drift, and also with models that use a linear drift based on transformed data that were originally nonlinear. Both existing models are based on a constant threshold. To estimate the remaining useful life, an analytical approximation to the distribution of the first hitting time of the diffusion process crossing a threshold level is obtained in a closed form by a time-space transformation under a mild assumption. The unknown parameters in the established model are estimated using the maximum likelihood estimation approach, and goodness of fit measures are applied. The usefulness of the proposed model is demonstrated by several real-world examples. The results reveal that considering nonlinearity in the degradation process can significantly improve the accuracy of remaining useful life estimation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new look at the statistical model identification
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100705 · Cited by 51,879
The Statistical Analysis of Failure Time Data.
Aitkin, M., Kalbfleisch, J. D., & Prentice, R. L. (1981) · Biometrics · doi:10.2307/2530581 · Cited by 9,877
Convergence Properties of the Nelder--Mead Simplex Method in Low Dimensions
Lagarias, J. C., Reeds, J. A., Wright, M. H., & Wright, P. E. (1998) · SIAM Journal on Optimization · doi:10.1137/s1052623496303470 · Cited by 7,447
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
The Theory of Stochastic Processes
Cox, D. R., Miller, H. D., Weiss, G., & Shuler, K. (1966) · Physics Today · doi:10.1063/1.3047872 · Cited by 3,324
The Statistical Analysis of Failure Time Data
Kalbfleisch, J. D., & Prentice, R. L. (2002) · Wiley Series in Probability and Statistics · doi:10.1002/9781118032985 · Cited by 3,219
A second course in stochastic processes
Karlin, S., & Taylor, H. E. (1981) · Cited by 2,770
Statistical Methods for Reliability Data
Nelson, W. (1998) · Technometrics · doi:10.1080/00401706.1998.10485526 · Cited by 2,504
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
Self-citationOn the Value of Mitigation and Contingency Strategies for Managing Supply Chain Disruption Risks
Tomlin, B. (2006) · Management Science · doi:10.1287/mnsc.1060.0515 · Cited by 1,700
OR/MS research in disaster operations management
Altay, N., & Green, W. G. (2006) · European Journal of Operational Research · doi:10.1016/j.ejor.2005.05.016 · Cited by 1,639
Accelerated Testing: Statistical Models, Test Plans, and Data Analyses.
Macarthur, E., & Nelson, W. (1992) · Applied Statistics · doi:10.2307/2347642 · Cited by 1,425
Accelerated Testing: Statistical Models, Test Plans, and Data Analysis
Nelson, W. (1990) · Wiley Series in Probability and Statistics · doi:10.1002/9780470316795 · Cited by 1,416
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
Using Degradation Measures to Estimate a Time-to-Failure Distribution
Lu, C. J., & Meeker, W. O. (1993) · Technometrics · doi:10.1080/00401706.1993.10485038 · Cited by 1,161
Prognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
Self-citationAn introduction to inertial navigation
Woodman, O. J. (2021) · doi:10.48456/tr-696 · Cited by 791
Residual-life distributions from component degradation signals: A Bayesian approach
GEBRAEEL, N. Z., LAWLEY, M. A., LI, R., & RYAN, J. K. (2005) · IIE Transactions · doi:10.1080/07408170590929018 · Cited by 788
The theory of stochastic processes
Papoulis, A. (1966) · Journal of the Franklin Institute · doi:10.1016/0016-0032(66)90048-2 · Cited by 686
A Review of Accelerated Test Models
Escobar, L. A., & Meeker, W. Q. (2006) · Statistical Science · doi:10.1214/088342306000000321 · Cited by 640
Oakland, J. S. (2012) · Routledge eBooks · doi:10.4324/9780080474458 · Cited by 528
A Review of Accelerated Test ModelsPreprint
Escobar, L. A., & Meeker, W. Q. (2006) · Cited by 518
Modelling Accelerated Degradation Data Using Wiener Diffusion With A Time Scale Transformation
Whitmore, G. A., & Schenkelberg, F. (1997) · Lifetime Data Analysis · doi:10.1023/a:1009664101413 · Cited by 489
Survival in Dynamic Environments
Singpurwalla, N. D. (1995) · Statistical Science · doi:10.1214/ss/1177010132 · Cited by 488
Accelerated Degradation Models for Failure Based on Geometric Brownian Motion and Gamma Processes
Park, C., & Padgett, W. J. (2005) · Lifetime Data Analysis · doi:10.1007/s10985-005-5237-8 · Cited by 441
An Inverse Gaussian Process Model for Degradation Data
Wang, X., & Xu, D. (2010) · Technometrics · doi:10.1198/tech.2009.08197 · Cited by 395
Numerical solution of stochastic differential equations
Talay, D. (1994) · Stochastics and Stochastic Reports · doi:10.1080/17442509408833885 · Cited by 395
Wiener processes with random effects for degradation data
Wang, X. (2010) · Journal of Multivariate Analysis · doi:10.1016/j.jmva.2008.12.007 · Cited by 394
Doksum, K. A., Høyland, A., & Høyland, A. (1992) · Technometrics · doi:10.2307/1269554 · Cited by 378
Mis-Specification Analysis of Linear Degradation Models
Peng, C.-Y., & Tseng, S.-T. (2009) · IEEE Transactions on Reliability · doi:10.1109/tr.2009.2026784 · Cited by 374
The Inverse Gaussian Distribution as a Lifetime Model
Chhikara, R. S., & Folks, J. L. (1977) · Technometrics · doi:10.1080/00401706.1977.10489586 · Cited by 362
Beskos, A., Papaspiliopoulos, O., Roberts, G. O., & Fearnhead, P. (2006) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.1467-9868.2006.00552.x · Cited by 349
Probability plotting methods for the analysis for the analysis of data
WILK, M. B., & GNANADESIKAN, R. (1968) · Biometrika · doi:10.1093/biomet/55.1.1 · Cited by 278
Lee, M.-L. T., & Whitmore, G. A. (2006) · Statistical Science · doi:10.1214/088342306000000330 · Cited by 276
Sensor-driven prognostic models for equipment replacement and spare parts inventory
Elwany, A. H., & Gebraeel, N. (2008) · IIE Transactions · doi:10.1080/07408170701730818 · Cited by 270
Stochastic Degradation Models With Several Accelerating Variables
Park, C., & Padgett, W. J. (2006) · IEEE Transactions on Reliability · doi:10.1109/tr.2006.874937 · Cited by 251
Aalen, O. O., & Gjessing, H. K. (2001) · Statistical Science · doi:10.1214/ss/998929473 · Cited by 223
Gebraeel, N., & Pan, J. (2008) · IEEE Transactions on Reliability · doi:10.1109/tr.2008.928245 · Cited by 222
The first-passage density of a continuous gaussian process to a general boundary
Durbin, J. (1985) · Journal of Applied Probability · doi:10.1017/s0021900200029041 · Cited by 196
Mazhar, M. I., Kara, S., & Kaebernick, H. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.021 · Cited by 193
An approach to operational aircraft maintenance planning
Papakostas, N., Papachatzakis, P., Xanthakis, V., Mourtzis, D., & Chryssolouris, G. (2010) · Decision Support Systems · doi:10.1016/j.dss.2009.11.010 · Cited by 193
A model for residual life prediction based on Brownian motion with an adaptive drift
Wang, W., Carr, M., Xu, W., & Kobbacy, K. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2010.09.013 · Cited by 191
Self-citationStochastic models for degradation-based reliability
KHAROUFEH, J. P., & COX, S. M. (2005) · IIE Transactions · doi:10.1080/07408170590929009 · Cited by 174
An Analysis of Product Lifetimes in a Technologically Dynamic Industry
Bayus, B. L. (1998) · Management Science · doi:10.1287/mnsc.44.6.763 · Cited by 166
Assessing Dynamic Breast Cancer Screening Policies
Maillart, L. M., Ivy, J. S., Ransom, S., & Diehl, K. (2008) · Operations Research · doi:10.1287/opre.1080.0614 · Cited by 163
Inference from Accelerated Degradation and Failure Data Based on Gaussian Process Models
Padgett, W. J., & Tomlinson, M. A. (2004) · Lifetime Data Analysis · doi:10.1023/b:lida.0000030203.49001.b6 · Cited by 162
Determination of burn‐in parameters and residual life for highly reliable products
Tseng, S., Tang, J., & Ku, I. (2002) · Naval Research Logistics (NRL) · doi:10.1002/nav.10042 · Cited by 159
Optimal non-periodic inspection for a multivariate degradation model
Barker, C. T., & Newby, M. J. (2007) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2007.03.015 · Cited by 155
A two-stage prognosis model in condition based maintenance
Wang, W. (2006) · European Journal of Operational Research · doi:10.1016/j.ejor.2006.08.047 · Cited by 144
Self-citationPark, J. I., & Bae, S. J. (2010) · IEEE Transactions on Reliability · doi:10.1109/tr.2010.2040761 · Cited by 130
Certain Properties of Gaussian Processes and Their First-Passage Times
Mehr, C. B., & McFadden, J. A. (1965) · Journal of the Royal Statistical Society Series B (Statistical Methodology) · doi:10.1111/j.2517-6161.1965.tb00611.x · Cited by 121
New Cumulative Damage Models for Failure Using Stochastic Processes as Initial Damage
Park, C., & Padgett, W. J. (2005) · IEEE Transactions on Reliability · doi:10.1109/tr.2005.853278 · Cited by 103
A computational approach to first-passage-time problems for Gauss–Markov processes
Nardo, E. D., Nobile, A. G., Pirozzi, E., et al. (2001) · Advances in Applied Probability · doi:10.1239/aap/999188324 · Cited by 100
Review and implementation of cure models based on first hitting times for Wiener processes
Balka, J., Desmond, A. F., & McNicholas, P. D. (2009) · Lifetime Data Analysis · doi:10.1007/s10985-008-9108-y · Cited by 94
Stochastic Diffusion Modeling of Degradation Data
Tseng, S., & Peng, C. (2021) · Journal of Data Science · doi:10.6339/jds.2007.05(3).351 · Cited by 84
Lifetime Distribution Based Degradation Analysis
Chen, Z., & Zheng, S. (2005) · IEEE Transactions on Reliability · doi:10.1109/tr.2004.837519 · Cited by 82
Optimal burn-in policy by using an integrated Wiener process
Tseng, S., & Peng, C. (2004) · IIE Transactions · doi:10.1080/07408170490507701 · Cited by 75
Tang, J., & Su, T. (2008) · Naval Research Logistics (NRL) · doi:10.1002/nav.20280 · Cited by 70
Some Remarks on Failure-times, Surrogate Markers, Degradation, Wear, and the Quality of Life
Cox, D. R. (1999) · Lifetime Data Analysis · doi:10.1023/a:1009684008455 · Cited by 57
Technical Note—Variate Generation for Accelerated Life and Proportional Hazards Models
Leemis, L. M. (1987) · Operations Research · doi:10.1287/opre.35.6.892 · Cited by 47
Buonocore, A., Caputo, L., Pirozzi, E., et al. (2009) · Methodology And Computing In Applied Probability · doi:10.1007/s11009-009-9132-8 · Cited by 40
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Zhang, Z., Si, X., Hu, C., & Lei, Y. (2018) · European Journal of Operational Research · doi:10.1016/j.ejor.2018.02.033 · Cited by 696
Self-citationStochastic modelling and analysis of degradation for highly reliable products
Ye, Z., & Xie, M. (2015) · Applied Stochastic Models in Business and Industry · doi:10.1002/asmb.2063 · Cited by 685
A Model-Based Method for Remaining Useful Life Prediction of Machinery
Lei, Y., Li, N., Gontarz, S., Lin, J., Radkowski, S., & Dybala, J. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2570568 · Cited by 617
A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem
Wang, Y., Peng, Y., Zi, Y., Jin, X., & Tsui, K.-L. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2535368 · Cited by 344
Metadata
- Authors
- Si, X.-S., Wang, W., Hu, C.-H., Zhou, D.-H., & Pecht, M. G.
- Venue
- IEEE Transactions on Reliability
- Published
- 2012-03
- Volume
- 61
- Issue
- 1
- Pages
- 50-67
- ISSN
- 0018-9529 (ISSN-L)
- 1558-1721
- OpenAlex
- W2108898839
- Cited by
- 662
- References
- 61
- FWCI
- 97.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.