The DOI matches its Crossref record.
Object-Handling System for Manual Industry
Abstract
An object-handling system for manual industry is described. This system is designed to have a compact structure and to accomplish multiple prehension and flexible motion for manual tasks. The system has three fingers which have structures similar to those of a human. Namely, these fingers are composed of three, four, and four joints, respectively, and can perform not only such simple motions as bending and extending but also such lateral flexing motions as adduction and abduction. The kinematics of the system is discussed in a rectangular coordinate system. The general solution for the finger joint is obtained by solving a fourth-degree equation. The control mode of each finger joint is suitably changed between position and torque control, and each joint is controlled by a hardware servo system. Cooperative motions among the fingers are easily realized by means of the hardware servo system. In an experiment of swing motion, cooperative motion based on a force control is accomplished between the right and left fingers without dropping the object. Bar turning and sphere turning are accomplished smoothly by a computer control in which control signals for finger joints are generated by interpolating a sequence of set points that has been stored in the computer in the teaching process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hands for dexterous manipulation and robust grasping: a difficult road toward simplicity
Bicchi, A. (2000) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.897777 · Cited by 895
A compliant, underactuated hand for robust manipulation
Odhner, L. U., Jentoft, L. P., Claffee, M. R., Corson, N., Tenzer, Y., Ma, R. R., Buehler, M., Kohout, R., Howe, R. D., & Dollar, A. M. (2014) · The International Journal of Robotics Research · doi:10.1177/0278364913514466 · Cited by 598
A Review of Tactile Information: Perception and Action Through Touch
Li, Q., Kroemer, O., Su, Z., Veiga, F. F., Kaboli, M., & Ritter, H. J. (2020) · IEEE Transactions on Robotics · doi:10.1109/tro.2020.3003230 · Cited by 332
Simulation and design of underactuated mechanical hands
Laliberté, T., & Gosselin, C. M. (1998) · Mechanism and Machine Theory · doi:10.1016/s0094-114x(97)00020-7 · Cited by 272
Metadata
- Authors
- Okada, T.
- Venue
- IEEE Transactions on Systems, Man, and Cybernetics
- Published
- 1979
- Volume
- 9
- Issue
- 2
- Pages
- 79-89
- ISSN
- 0018-9472 (ISSN-L)
- OpenAlex
- W2100664041
- Cited by
- 164
- References
- 0
- FWCI
- 6.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.