A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
An accurate control-oriented thermal model is of extreme importance for temperature monitoring and thermal management of lithium (Li)-ion batteries in automotive and grid applications. This article, for the first time, presents a comprehensively comparative study of seven representative control-oriented thermal models for cylindrical Li-ion batteries. These models were selected from the state-of-the-art simplified models reported in the existing literature. All these models are introduced in detail. The model assumptions of physical structure, heat generation, and heat conduction are analyzed. Particle swarm optimization (PSO) algorithm is utilized to identify model parameters. Modeling fidelity is evaluated and compared using both simulation campaigns and experimental data sets of cylindrical Li-iron phosphate batteries. The sensitivity of all 1-D models to convective heat transfer coefficient (or convective heat resistance) is quantitatively analyzed, and the computational complexity of the models is compared under a real drive cycle. All the comparisons are thoroughly discussed, and useful insights are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Particle swarm optimization: An overview
Poli, R., Kennedy, J., & Blackwell, T. (2007) · Swarm Intelligence · doi:10.1007/s11721-007-0002-0 · Cited by 21,101
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“For instance, the lumped-mass model (0-D model), where its thermal dynamics are simplified and represented by a bulk temperature [15], [16], has been broadly used in the thermal analysis of battery modules or packs due to its extremely high computational efficiency.”
BackgroundA critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 2×
“Model fidelity of the seven models is compared in a similar way to [4], and the use of model numbers enables a concise and clear presentation of comparison results.”
BackgroundMethodJaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188 · cited 1×
“According to the geometrical dimensions covered by thermal distribution, existing thermal models can be mainly divided into 0-D models, 1-D models, 2-D models, and 3-D models [12]–[14].”
MethodState estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857 · cited 1×
“2953606 temperature difference within the battery may exist, and the severe thermal inhomogeneity inside the battery may cause rapid performance degradation [9].”
BackgroundSelf-citationA lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677 · cited 13×
“The applied currents and heat generation rates under the Artemis HEV and UAC drive cycles are given in Figs.”
BackgroundMethodInfluentialSelf-citationLin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
Self-citation
Cited by
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097
“The liquid cooling devices of cylindrical LIB[72-74] and plate LIB[75, 76] have been proposed and studied.”
BackgroundHu, X., Zhang, K., Liu, K., Lin, X., Dey, S., & Onori, S. (2020) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.2964814 · Cited by 580
Self-citationThakur, A. K., Prabakaran, R., Elkadeem, M. R., Sharshir, S. W., Arıcı, M., Wang, C., Zhao, W., Hwang, J.-Y., & Saidur, R. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101771 · Cited by 287
Thermal state monitoring of lithium-ion batteries: Progress, challenges, and opportunities
Zheng, Y., Che, Y., Hu, X., Sui, X., Stroe, D.-I., & Teodorescu, R. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101120 · Cited by 273
Self-citationReview of energy storage systems for vehicles based on technology, environmental impacts, and costs
Balali, Y., & Stegen, S. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110185 · Cited by 260
Metadata
- Authors
- Hu, X., Liu, W., Lin, X., & Xie, Y.
- Venue
- IEEE Transactions on Transportation Electrification
- Published
- 2019-12
- Volume
- 5
- Issue
- 4
- Pages
- 1237-1253
- ISSN
- 2332-7782 (ISSN-L)
- 2372-2088
- OpenAlex
- W2991063206
- Cited by
- 135
- References
- 8
- FWCI
- 6.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries. https://app.cochat.ai/papers/10.1109/tte.2019.2953606
- The paper
- Hu, X., Liu, W., Lin, X., & Xie, Y. (2019). A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries. IEEE Transactions on Transportation Electrification. https://doi.org/10.1109/tte.2019.2953606
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.