Broadband Identification of Battery Electrical Impedance for HEVs
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Electrical impedance measurements provide useful information about the characteristics of a Li-ion battery. The classical method of measurement consists of performing electrochemical impedance spectroscopy (EIS) that relies on offline records of the response of the battery to a controlled current or voltage test signal. Although robust, it is considered as an expensive, complex, and very time-consuming method, particularly when used for an embedded system where a new whole measurement set should be carried once the impedance is to be tracked. To overcome these problems and to address embedded applications, we propose applying broadband excitation signals to perform such impedance measurements. Spectral coherence is an advanced parameter estimated to define the frequency bands where the transfer function of a system is accurately identified. The calculation of this parameter can also assess the normalized random errors on both the magnitude and the phase of the identified impedance since they are related by an explicit mathematical expression. After a brief review of some signal processing tools for identification with broadband excitation signals, we apply this method to identify the impedance of a Li-ion battery and to compare performances of various identification patterns on noisy simulated and experimental data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 1×
“particular, has been first proposed in [20]–[22].”
Halliday, D. M., Rosenberg, J. R., Amjad, A. M., Breeze, P., Conway, B. A., & Farmer, S. F. (1995) · Progress in Biophysics and Molecular Biology · doi:10.1016/s0079-6107(96)00009-0 · Cited by 1,107
Cited by
Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities
Wang, H., Liserre, M., & Blaabjerg, F. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2252958 · Cited by 916
Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
Wang, X., Wei, X., Zhu, J., Dai, H., Zheng, Y., Xu, X., & Chen, Q. (2021) · eTransportation · doi:10.1016/j.etran.2020.100093 · Cited by 451
Li, C., Yang, L., Li, Q., Zhang, Q., Zhou, Z., Meng, Y., Zhao, X., Wang, L., Zhang, S., Li, Y., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111167 · Cited by 268
Wang, X., Wei, X., & Dai, H. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.020 · Cited by 263
Metadata
- Authors
- Al Nazer, R., Cattin, V., Granjon, P., Montaru, M., & Ranieri, M.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2013-09
- Volume
- 62
- Issue
- 7
- Pages
- 2896-2905
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2146380440
- Cited by
- 80
- References
- 4
- FWCI
- 6.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Broadband Identification of Battery Electrical Impedance for HEVs. https://app.cochat.ai/papers/10.1109/tvt.2013.2254140
- The paper
- Al Nazer, R., Cattin, V., Granjon, P., Montaru, M., & Ranieri, M. (2013). Broadband Identification of Battery Electrical Impedance for HEVs. IEEE Transactions on Vehicular Technology. https://doi.org/10.1109/tvt.2013.2254140
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.