The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design of a Single-Stage Inductive-Power-Transfer Converter for Efficient EV Battery Charging
Abstract
This paper studies wireless charging of lithium-ion batteries for electric vehicles. The charging profile mandates a constant-current (CC) charging for a discharged battery until the battery voltage reaches the cutoff voltage at rated power. The charging continues at the cutoff voltage with a constant-voltage (CV) charging at a power level down to 3% of the rated power in order to fully charge the battery. An inductive-power-transfer (IPT) converter should be designed with minimal number of stages to achieve high efficiency. However, high efficiency for such a wide load range is difficult to achieve. Moreover, the efficiency-to-load relationship is distinctly different for CC and CV charging operations, posing difficulties for the single-stage design. This paper describes the design of a single-stage IPT converter that complies with the battery charging profile and, at the same time, achieves optimal efficiency. Design optimization includes soft switching for the entire battery load range, efficiency optimization for CC and CV modes of operation, and system efficiency optimization for the whole battery charging profile. Measured results of two experimental IPT battery chargers are presented for illustration and verification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817 · cited 1×
“The charging process for Li-ion batteries usually consists of four main stages [13], [14]: trickle charging, constant-current (CC) charging, constant-voltage (CV) charging and charge termination.”
Background
Cited by
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Song, K., Li, Z., Jiang, J., & Zhu, C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2767099 · Cited by 337
Control design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Self-citation
Metadata
- Authors
- Huang, Z., Wong, S.-C., & Tse, C. K.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2017-07
- Volume
- 66
- Issue
- 7
- Pages
- 5808-5821
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2555718399
- Cited by
- 171
- References
- 1
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.