The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Plastic waste as a novel substrate for industrial biotechnology
Open accessAbstract
Two hundred and seventy five million tons of plastic waste were produced in 2010 alone (Jambeck et al., 2015), with Europe accounting for about 55 million tons per year. The environmental impact of these, primarily fossil-based, plastics has been broadly discussed. While the vast majority of these polymers are not biodegradable, their strength and light weight provide comparative advantages. Poly(ethylene terephthalate) (PET), for instance, has contributed significantly to reducing energy expenditure during transport, especially in the beverage industry. Due to its thermoplastic nature PET is also easy to recycle. However, recycled PET products struggle to compete with virgin PET on price and quality, leading to an overall European recycling rate of less than 30% (PlasticsEurope, 2015). Polyurethanes (PU) are used extensively in a wide range of applications including construction, transportation, furniture and medicine. Since many PU types have a thermoset nature with covalent cross links, one of the main concerns for this plastic is the notable lack of end-of-life recycling (< 5%). Finally, polyethylene (the most used plastic, ca. 140 million tons per year), is considered to be practically inert and its recycling (other than its downcycling into lumber) is economically unfavourable (Sivan, 2011), thereby creating a phenomenal environmental impact, especially in marine environments (Cozar et al., 2014; 2015). While a few countries manage major fractions of plastic waste through incineration in controlled industrial facilities, release of recalcitrant post-consumer plastic into nature remains a major problem globally. Significant amounts of plastic waste contribute to the large-scale pollution of the oceans (Katsnelson, 2015), with terms such as 'the Great Pacific Garbage Patch' and 'the Trash Vortex' mobilizing public opinion. The widespread distribution of microplastics in the food chain, with as yet unknown effects on biodiversity and human health is also appearing more in the scientific and general literature (Allsopp et al., 2006; Setala et al., 2014; Avio et al., 2015). The momentum for change away from current practices and towards a sustainable model of exploitation of waste and renewable resources is growing. In order to counteract the pollutant/recycling problems, the revised European Union (EU) Waste Framework Directive has set a minimum plastic recycling target of 50% for household waste and 70% for building and construction waste, which must be reached by all EU member states by 2020. However, without a clear technology roadmap – not to mention an attractive market strategy, the increase in recycling rates will in our opinion not be achievable. Given this background, we propose to use plastic wastes as substrates for the synthesis of added value products, which will empower the recycling industry to a qualitatively new dimension. How can microbial biotechnology contribute now to this enormous challenge? The advances in our understanding of microbial functions from enzyme, to pathways, and entire metabolic networks now allow the engineering of complex metabolic functions in microbes (Blank and Ebert, 2013). With the ever-advancing tools from synthetic biology e.g. for genome editing (Nikel et al., 2014), we can overcome the major challenges for a biotechnological plastic waste-based value chain. Some of the challenges and recent developments are highlighted below. Thermochemical depolymerization of plastics is a rapidly developing field, but often suffers from a lack of added value since the focus lies mostly on liquid and gaseous fuel [synthesis gas (syngas)] production or the re-polymerization to the original polymer. The thermochemical depolymerization of plastic wastes to monomers or syngas, followed by microbial fermentation to generate, for example, higher value biodegradable polymers has emerged as an exciting approach for plastic upcycling (Ward et al., 2006; Goff et al., 2007; Kenny et al., 2008; Guzik et al., 2014; Drzyzga et al., 2015). However improvements in the growth and levels of biodegradable polymer accumulation by bacteria from these substrates are required. Synthetic biology has the potential to address these plastic waste challenges. Several companies are developing technologies based on syngas fermentation from complex wastes, but most of them are still at the pre-commercial stage since various technical and economic challenges must be overcome before commercial-scale plants can be established (e.g. mass transfer limitation). Biology may also be able to offer depolymerization solutions. While PET has previously been considered recalcitrant to biological degradation, recently it has been shown that it can be depolymerized by hydrolytic enzymes, such as cutinases and carboxyl esterases, produced by bacteria and fungi (Wei et al., 2014). In addition, several bacterial species can use PU as a sole carbon source using enzymes (PUase) mainly classified as esterases, lipases and pr
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic debris in the open ocean
Cózar, A., Echevarría, F., González-Gordillo, J. I., Irigoien, X., Úbeda, B., Hernández-León, S., Palma, Á. T., Navarro, S., García-de-Lomas, J., Ruiz, A., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1314705111 · Cited by 3,133
Pollutants bioavailability and toxicological risk from microplastics to marine mussels
Avio, C. G., Gorbi, S., Milan, M., Benedetti, M., Fattorini, D., d'Errico, G., Pauletto, M., Bargelloni, L., & Regoli, F. (2015) · Environmental Pollution · doi:10.1016/j.envpol.2014.12.021 · Cited by 1,413
Cited by
Chemical and biological catalysis for plastics recycling and upcycling
Ellis, L. D., Rorrer, N. A., Sullivan, K. P., Otto, M., McGeehan, J. E., Román-Leshkov, Y., Wierckx, N., & Beckham, G. T. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00648-4 · Cited by 1,201
Self-citationCharacterization and engineering of a plastic-degrading aromatic polyesterase
Austin, H. P., Allen, M. D., Donohoe, B. S., Rorrer, N. A., Kearns, F. L., Silveira, R. L., Pollard, B. C., Dominick, G., Duman, R., El Omari, K., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1718804115 · Cited by 1,079
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Microbial Degradation and Valorization of Plastic Wastes
Ru, J., Huo, Y., & Yang, Y. (2020) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.00442 · Cited by 609
Metadata
- Authors
- Wierckx, N., Prieto, M. A., Pomposiello, P., de Lorenzo, V., O'Connor, K., & Blank, L. M.
- Venue
- Microbial Biotechnology
- Publisher
- Wiley
- Published
- 2015-08-25
- Volume
- 8
- Issue
- 6
- Pages
- 900-903
- ISSN
- 1751-7915 (ISSN-L)
- OpenAlex
- W2119281900
- Cited by
- 186
- References
- 2
- FWCI
- 5.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Plastic waste as a novel substrate for industrial biotechnology. https://app.cochat.ai/papers/10.1111/1751-7915.12312
- The paper
- Wierckx, N., Prieto, M. A., Pomposiello, P., de Lorenzo, V., O'Connor, K., & Blank, L. M. (2015). Plastic waste as a novel substrate for industrial biotechnology. Microbial Biotechnology. https://doi.org/10.1111/1751-7915.12312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.