Take‐Back Legislation: Consequences for Remanufacturing and Environment
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
In the last two decades, many countries have enacted product take‐back legislation that holds manufacturers responsible for the collection and environmentally sound treatment of end‐of‐use products. In an industry regulated by such legislation, we consider a manufacturer that also sells remanufactured products under its brand name. Using a stylized model, we consider three levels of legislation: no take‐back legislation, legislation with collection targets, and legislation with collection and reuse targets. We characterize the optimal solution for the manufacturer and analyze how various levels of legislation affect manufacturing, remanufacturing, and collection decisions. First, we explore whether legislation with only collection targets causes an increase in remanufacturing levels, which is argued to be an environmentally friendlier option for end‐of‐use treatment than other options such as recycling. While increased remanufacturing alone is usually perceived as a favorable environmental outcome, if one considers the overall environmental impact of new and remanufactured products, this might not be the case. To study this issue, we model the environmental impact of the product following a life cycle analysis–based approach. We characterize the conditions under which increased remanufacturing due to take‐back legislation causes an increase in total environmental impact. Finally, we model the impact of legislation on consumer surplus and manufacturer profits and identify when total welfare goes down because of legislation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Closed-Loop Supply Chain Models with Product Remanufacturing
Savaskan, R. C., Bhattacharya, S., & Van Wassenhove, L. N. (2004) · Management Science · doi:10.1287/mnsc.1030.0186 · Cited by 2,227 · cited 1×
“Other streams of CLSC literature include research related to procurement of cores (e.g., Guide et al. 2003), choice of the optimal reverse channel (e.g., Savaskan et al. 2004) or the optimal collection scheme under take-back legislation (e.g., Boyacı et al. 2011).”
BackgroundRemanufacturing as a Marketing Strategy
Atasu, A., Sarvary, M., & Van Wassenhove, L. N. (2008) · Management Science · doi:10.1287/mnsc.1080.0893 · Cited by 951 · cited 3×
“Following the common assumptions in remanufacturing literature (e.g., Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Atasu et al. 2008a, Galbreth et al. 2013) we assume that customers’ valuations for the new product v is distributed uniformly in the interval [0, Q] and each customer’s…”
BackgroundMethodThe Effect of Competition on Recovery Strategies
Ferguson, M. E., & Toktay, L. B. (2006) · Production and Operations Management · doi:10.1111/j.1937-5956.2006.tb00250.x · Cited by 823 · cited 6×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundMethodInfluentialManaging New and Remanufactured Products
Ferrer, G., & Swaminathan, J. M. (2006) · Management Science · doi:10.1287/mnsc.1050.0465 · Cited by 814 · cited 5×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundMethodInfluentialSelf-citationMANAGING PRODUCT RETURNS FOR REMANUFACTURING
GUIDE, V. D. R., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00075.x · Cited by 708 · cited 2×
“measuring the total impact (Gutowski et al. 2011). In this paper, based on an LCA-based approach, we build a construct to capture the environmental impact of the product through its life cycle, including the usage stage. We find that an unintended consequence of collection and reuse targets may be an increase in the t…”
BackgroundMethodMarket Segmentation and Product Technology Selection for Remanufacturable Products
Debo, L. G., Toktay, L. B., & Van Wassenhove, L. N. (2005) · Management Science · doi:10.1287/mnsc.1050.0369 · Cited by 691 · cited 1×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundClosed‐Loop Supply Chains: A Critical Review, and Future Research*
Souza, G. C. (2013) · Decision Sciences · doi:10.1111/j.1540-5915.2012.00394.x · Cited by 597 · cited 5×
“Atasu and Souza (2013) analyze the impact of different product recovery options on a monopolist OEM’s product quality choice.”
BackgroundMethodInfluentialMatching Demand and Supply to Maximize Profits from Remanufacturing
Guide, V. D. R., Teunter, R. H., & Van Wassenhove, L. N. (2003) · Manufacturing & Service Operations Management · doi:10.1287/msom.5.4.303.24883 · Cited by 525 · cited 1×
“Other streams of CLSC literature include research related to procurement of cores (e.g., Guide et al. 2003), choice of the optimal reverse channel (e.g., Savaskan et al. 2004) or the optimal collection scheme under take-back legislation (e.g., Boyacı et al. 2011).”
BackgroundCompetitive Quality Choice and Remanufacturing
Örsdemir, A., Kemahlıoğlu‐Ziya, E., & Parlaktürk, A. K. (2014) · Production and Operations Management · doi:10.1111/poms.12040 · Cited by 438 · cited 2×
“Single-period, steady-state models are common in the remanufacturing (e.g., Atasu and Souza 2013, Galbreth et al. 2013, Örsdemir et al. 2013) and take-back legislation literatures (e.g., Atasu et al. 2009, Jacobs and Subramanian 2012).”
BackgroundSelf-citationEfficient Take‐Back Legislation
Atasu, A., Van Wassenhove, L. N., & Sarvary, M. (2009) · Production and Operations Management · doi:10.1111/j.1937-5956.2009.01004.x · Cited by 392 · cited 6×
“Finally, Atasu et al. (2009) show that under the linear cost assumption, which we also make, the recycling target should be selected at its upper bound, which is the collection target.”
BackgroundMethodInfluential
Cited by
Rohm, H., Oostindjer, M., Aschemann-Witzel, J., Symmank, C., L. Almli, V., De Hooge, I., Normann, A., & Karantininis, K. (2017) · Foods · doi:10.3390/foods6120104 · Cited by 104
Liu, C.-Y., Wang, H., Tang, J., Chang, C.-T., & Liu, Z. (2021) · Transportation Research Part E Logistics and Transportation Review · doi:10.1016/j.tre.2021.102516 · Cited by 83
Innovating collection modes for waste electrical and electronic equipment in China
Cao, J., Xu, J., Wang, H., Zhang, X., Chen, X., Zhao, Y., Yang, X., Zhou, G., & Schnoor, J. L. (2018) · Sustainability · doi:10.3390/su10051446 · Cited by 39
“Despite such contamination and damage mentioned above, some WEEE remains valuable as functions of them can be restored [14].”
Background
Metadata
- Authors
- Esenduran, G., Kemahlıoğlu‐Ziya, E., & Swaminathan, J. M.
- Venue
- Decision Sciences
- Publisher
- Wiley
- Published
- 2015-09-17
- Volume
- 47
- Issue
- 2
- Pages
- 219-256
- ISSN
- 0011-7315 (ISSN-L)
- 1540-5915
- OpenAlex
- W1960012385
- Cited by
- 178
- References
- 37
- FWCI
- 25.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.