Take‐Back Legislation: Consequences for Remanufacturing and Environment
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
In the last two decades, many countries have enacted product take‐back legislation that holds manufacturers responsible for the collection and environmentally sound treatment of end‐of‐use products. In an industry regulated by such legislation, we consider a manufacturer that also sells remanufactured products under its brand name. Using a stylized model, we consider three levels of legislation: no take‐back legislation, legislation with collection targets, and legislation with collection and reuse targets. We characterize the optimal solution for the manufacturer and analyze how various levels of legislation affect manufacturing, remanufacturing, and collection decisions. First, we explore whether legislation with only collection targets causes an increase in remanufacturing levels, which is argued to be an environmentally friendlier option for end‐of‐use treatment than other options such as recycling. While increased remanufacturing alone is usually perceived as a favorable environmental outcome, if one considers the overall environmental impact of new and remanufactured products, this might not be the case. To study this issue, we model the environmental impact of the product following a life cycle analysis–based approach. We characterize the conditions under which increased remanufacturing due to take‐back legislation causes an increase in total environmental impact. Finally, we model the impact of legislation on consumer surplus and manufacturer profits and identify when total welfare goes down because of legislation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Closed-Loop Supply Chain Models with Product Remanufacturing
Savaskan, R. C., Bhattacharya, S., & Van Wassenhove, L. N. (2004) · Management Science · doi:10.1287/mnsc.1030.0186 · Cited by 2,227 · cited 1×
“Other streams of CLSC literature include research related to procurement of cores (e.g., Guide et al. 2003), choice of the optimal reverse channel (e.g., Savaskan et al. 2004) or the optimal collection scheme under take-back legislation (e.g., Boyacı et al. 2011).”
BackgroundRemanufacturing as a Marketing Strategy
Atasu, A., Sarvary, M., & Van Wassenhove, L. N. (2008) · Management Science · doi:10.1287/mnsc.1080.0893 · Cited by 951 · cited 3×
“Following the common assumptions in remanufacturing literature (e.g., Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Atasu et al. 2008a, Galbreth et al. 2013) we assume that customers’ valuations for the new product v is distributed uniformly in the interval [0, Q] and each customer’s…”
BackgroundMethodThe Effect of Competition on Recovery Strategies
Ferguson, M. E., & Toktay, L. B. (2006) · Production and Operations Management · doi:10.1111/j.1937-5956.2006.tb00250.x · Cited by 823 · cited 6×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundMethodInfluentialManaging New and Remanufactured Products
Ferrer, G., & Swaminathan, J. M. (2006) · Management Science · doi:10.1287/mnsc.1050.0465 · Cited by 814 · cited 5×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundMethodInfluentialSelf-citationMANAGING PRODUCT RETURNS FOR REMANUFACTURING
GUIDE, V. D. R., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00075.x · Cited by 708 · cited 2×
“measuring the total impact (Gutowski et al. 2011). In this paper, based on an LCA-based approach, we build a construct to capture the environmental impact of the product through its life cycle, including the usage stage. We find that an unintended consequence of collection and reuse targets may be an increase in the t…”
BackgroundMethodMarket Segmentation and Product Technology Selection for Remanufacturable Products
Debo, L. G., Toktay, L. B., & Van Wassenhove, L. N. (2005) · Management Science · doi:10.1287/mnsc.1050.0369 · Cited by 691 · cited 1×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundClosed‐Loop Supply Chains: A Critical Review, and Future Research*
Souza, G. C. (2013) · Decision Sciences · doi:10.1111/j.1540-5915.2012.00394.x · Cited by 597 · cited 5×
“Atasu and Souza (2013) analyze the impact of different product recovery options on a monopolist OEM’s product quality choice.”
BackgroundMethodInfluentialMatching Demand and Supply to Maximize Profits from Remanufacturing
Guide, V. D. R., Teunter, R. H., & Van Wassenhove, L. N. (2003) · Manufacturing & Service Operations Management · doi:10.1287/msom.5.4.303.24883 · Cited by 525 · cited 1×
“Other streams of CLSC literature include research related to procurement of cores (e.g., Guide et al. 2003), choice of the optimal reverse channel (e.g., Savaskan et al. 2004) or the optimal collection scheme under take-back legislation (e.g., Boyacı et al. 2011).”
BackgroundCompetitive Quality Choice and Remanufacturing
Örsdemir, A., Kemahlıoğlu‐Ziya, E., & Parlaktürk, A. K. (2014) · Production and Operations Management · doi:10.1111/poms.12040 · Cited by 438 · cited 2×
“Single-period, steady-state models are common in the remanufacturing (e.g., Atasu and Souza 2013, Galbreth et al. 2013, Örsdemir et al. 2013) and take-back legislation literatures (e.g., Atasu et al. 2009, Jacobs and Subramanian 2012).”
BackgroundSelf-citationEfficient Take‐Back Legislation
Atasu, A., Van Wassenhove, L. N., & Sarvary, M. (2009) · Production and Operations Management · doi:10.1111/j.1937-5956.2009.01004.x · Cited by 392 · cited 6×
“Finally, Atasu et al. (2009) show that under the linear cost assumption, which we also make, the recycling target should be selected at its upper bound, which is the collection target.”
BackgroundMethodInfluentialHow Does Product Recovery Affect Quality Choice?
Atasu, A., & Souza, G. C. (2013) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01290.x · Cited by 323 · cited 6×
“Atasu and Souza (2013) analyze the impact of different product recovery options on a monopolist OEM’s product quality choice.”
BackgroundMethodInfluentialThe economics of cell phone reuse and recycling
Geyer, R., & Doctori Blass, V. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2228-z · Cited by 318 · cited 1×
“In another study, Geyer and Blass (2010) find that cost of recycling per phone is 0.18 $ whereas revenue per phone is 0.75 $, therefore total cost is cD = 0.18−0.75 = −0.57 $.”
BackgroundInfluentialCompetitive strategy in remanufacturing and the impact of take‐back laws
Webster, S., & Mitra, S. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.014 · Cited by 316 · cited 1×
“Webster and Mitra (2007) study the competition between the original equipment manufacturer (OEM) and third-party remanufacturers and characterize the Nash equilibrium in the absence of take-back legislation.”
BackgroundKey Factors in the Market for Remanufactured Products
Subramanian, R., & Subramanyam, R. (2012) · Manufacturing & Service Operations Management · doi:10.1287/msom.1110.0368 · Cited by 308 · cited 1×
“It has been argued that, α (i.e., the customers valuation for the remanufactured product as a fraction of his valuation for the new product) can vary from 45% (Hauser and Lund 2003) to 85% (Subramanian and Subramanyam 2012).”
BackgroundHow Collection Cost Structure Drives a Manufacturer's Reverse Channel Choice
Atasu, A., Toktay, L. B., & Van Wassenhove, L. N. (2013) · Production and Operations Management · doi:10.1111/j.1937-5956.2012.01426.x · Cited by 306 · cited 2×
“For example, Ferguson and Toktay (2006) and Atasu et al. (2013) argue that collection cost might increase, as the amount collected increases since it is increasingly difficult to reach consumers.”
BackgroundMethodInfluentialRevenue and Cost Management for Remanufactured Products
Ovchinnikov, A. (2011) · Production and Operations Management · doi:10.1111/j.1937-5956.2010.01214.x · Cited by 283 · cited 4×
“Ovchinnikov (2011) shows that, if the price of the remanufactured product compared to the price of new product significantly goes down, then customers suspect the product quality and do not purchase the remanufactured item (regardless of their valuation).”
BackgroundResultInfluentialEffects of E-Waste Regulation on New Product Introduction
Plambeck, E. L., & Wang, Q. (2009) · Management Science · doi:10.1287/mnsc.1080.0970 · Cited by 271 · cited 1×
“Plambeck and Taylor (2006) and Plambeck and Wang (2009) also examine the consequences of environmental legislation on supply-chain decisions.”
BackgroundRemanufacturing and Energy Savings
Gutowski, T. G., Sahni, S., Boustani, A., & Graves, S. C. (2011) · Environmental Science & Technology · doi:10.1021/es102598b · Cited by 260 · cited 10×
“For example, Gutowski et al. (2011) show that older versions of products may not be as energy efficient as new ones, and the increased energy requirements during the usage stage negate the benefits of lower energy requirements during the remanufacturing stage.”
BackgroundInfluentialStern, D. I. (2004) · Encyclopedia of Energy · doi:10.1016/b0-12-176480-x/00147-9 · Cited by 239
Sharing Responsibility for Product Recovery Across the Supply Chain
Jacobs, B. W., & Subramanian, R. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01246.x · Cited by 222 · cited 3×
“Single-period, steady-state models are common in the remanufacturing (e.g., Atasu and Souza 2013, Galbreth et al. 2013, Örsdemir et al. 2013) and take-back legislation literatures (e.g., Atasu et al. 2009, Jacobs and Subramanian 2012).”
BackgroundDesign for the Environment: Life‐Cycle Approach Using a Newsvendor Model
Raz, G., Druehl, C. T., & Blass, V. (2013) · Production and Operations Management · doi:10.1111/poms.12011 · Cited by 199 · cited 2×
“Similar to Quariguasi and Bloemhof-Ruwaard (2012), Ovchinnikov et al. (2013), and Raz et al. (2013), our study uses energy usage as a proxy for environmental impact.”
BackgroundResultInfluentialEconomic and Environmental Assessment of Remanufacturing Strategies for Product + Service Firms
Ovchinnikov, A., Blass, V., & Raz, G. (2014) · Production and Operations Management · doi:10.1111/poms.12070 · Cited by 197 · cited 6×
“In response to legislation, the manufacturer reduces new product manufacturing but increases the amount of remanufacturing (see Corollary 2).”
BackgroundMethodResultInfluentialSodhi, M. S., & Reimer, B. (2001) · OR Spektrum · doi:10.1007/pl00013347 · Cited by 175 · cited 2×
“An example is the recycling of precious metals in electronic products such as cell phones, CPUs, and laptops (Sodhi and Reimer 2001, HECC 2005).”
BackgroundProduct, process, and organizational design for remanufacture – an overview of research
Bras, B., & McIntosh, M. W. (1999) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(99)00021-6 · Cited by 165 · cited 2×
“Recent LCA studies suggest that, for many consumer products, the usage stage is the most polluting stage (Bras and McIntosh 1999, Gutowski et al. 2011).”
BackgroundProduct Reuse in Innovative Industries
Galbreth, M. R., Boyacı, T., & Verter, V. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2012.01330.x · Cited by 164 · cited 7×
“Consistent with the literature, we assume that cores can be remanufactured once (Debo et al. 2005, Ferrer and Swaminathan 2006, Ferguson and Toktay 2006, Galbreth et al. 2013).”
BackgroundMethodInfluentialSustainable Supply Chains: Models, Methods, and Public Policy Implications
(2012) · International Series in Operations Research & Management Science · doi:10.1007/978-1-4419-6105-1 · Cited by 162 · cited 3×
“Remanufacturing is usually perceived as being environmentally friendlier than recycling, because it captures the residual value of the used product and saves approximately 80% of the energy and material used to manufacture equivalent new products (Boone et al. 2012).”
BackgroundAn Analysis of Monopolistic and Competitive Take‐Back Schemes for WEEE Recycling
Toyasaki, F., Boyacι, T., & Verter, V. (2011) · Production and Operations Management · doi:10.1111/j.1937-5956.2010.01207.x · Cited by 150
Strategic response to EEE returns:
Zuidwijk, R. A., & Krikke, H. R. (2007) · European Journal of Operational Research · doi:10.1016/j.ejor.2007.08.004 · Cited by 125
An Analysis of the Eco‐Efficiency of Remanufactured Personal Computers and Mobile Phones
Quariguasi‐Frota‐Neto, J., & Bloemhof, J. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01234.x · Cited by 107
Stern, D. I. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-409548-9.09716-5 · Cited by 95 · cited 1×
“In the economics literature, the environmental impact (such as the energy usage or carbon emission) per unit of GDP or per unit economic output has been widely used as a metric (Stern 2004, The World Bank 2008, Jacob and Slaus 2011).”
MethodRemanufacturing and product design: designing for the 7th generation
Charter, M., & Gray, C. (2007) · Cited by 82
Appliance remanufacturing and life cycle energy and economic savings
Boustani, A., Sahni, S., Graves, S. C., & Gutowski, T. G. (2010) · Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology · doi:10.1109/issst.2010.5507713 · Cited by 66 · cited 2×
“For example, Boustani et al. (2010) finds that, for appliances such as refrigerators, dishwashers, and washers, the usage stage constitutes up to 95% of the total life cycle energy use.”
BackgroundInfluentialEnergy analysis of end-of-life options for personal computers: resell, upgrade, recycle
Williams, E., & Sasaki, Y. (2003) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.2003.1208072 · Cited by 65 · cited 2×
“Considering that in order to produce a desktop computer from scratch, 240 kg of fossil fuels, 22 kg of chemicals, and 1,500 kg of water are needed (Williams and Sasaki 2003), remanufacturing electronics might save tremendous amounts of resources.”
BackgroundMetrics for end-of-life strategies (ELSEIM)
Rose, C. M., & Stevels, A. L. N. (2002) · doi:10.1109/isee.2001.924509 · Cited by 30 · cited 2×
“In addition, Corollary 3 implies that for products with high environmental impact at the remanufacturing stage (x), even for small values of t we may observe an increase in environmental impact due to an increased amount of production (new + remanufactured product).”
BackgroundThe Environmental Gains of Remanufacturing: Evidence from the Computer and Mobile IndustryPreprint
Neto, J. Q. F., & Bloemhof‐Ruwaard, J. M. (2009) · RePEc: Research Papers in Economics · Cited by 19
Complete life-cycle assessment of the energy/CO2 costs of videoconferencing vs face-to-face meetings
Ong, D., Moors, T., & Sivaraman, V. (2012) · IEEE Online Conference on Green Communications (OnlineGreenComm) · doi:10.1109/greencom.2012.6519615 · Cited by 18 · cited 1×
“Several studies state that manufacturing and usage energy consumption for display devices constitutes most of the overall energy consumption throughout the product’s life cycle and thus energy requirement for disposal is omitted (Ong et al. 2012, Williams and Sasaki 2003).”
BackgroundVerification of the cumulative energy demand (CED) as a simplified indicator for LCA.
Walk, W., Buchgeister, J., & Schebek, L. (2005) · TUbilio (Technical University of Darmstadt) · Cited by 8
Cited by
Rohm, H., Oostindjer, M., Aschemann-Witzel, J., Symmank, C., L. Almli, V., De Hooge, I., Normann, A., & Karantininis, K. (2017) · Foods · doi:10.3390/foods6120104 · Cited by 104
Liu, C.-Y., Wang, H., Tang, J., Chang, C.-T., & Liu, Z. (2021) · Transportation Research Part E Logistics and Transportation Review · doi:10.1016/j.tre.2021.102516 · Cited by 83
Innovating collection modes for waste electrical and electronic equipment in China
Cao, J., Xu, J., Wang, H., Zhang, X., Chen, X., Zhao, Y., Yang, X., Zhou, G., & Schnoor, J. L. (2018) · Sustainability · doi:10.3390/su10051446 · Cited by 39
“Despite such contamination and damage mentioned above, some WEEE remains valuable as functions of them can be restored [14].”
Background
Metadata
- Authors
- Esenduran, G., Kemahlıoğlu‐Ziya, E., & Swaminathan, J. M.
- Venue
- Decision Sciences
- Publisher
- Wiley
- Published
- 2015-09-17
- Volume
- 47
- Issue
- 2
- Pages
- 219-256
- ISSN
- 0011-7315 (ISSN-L)
- 1540-5915
- OpenAlex
- W1960012385
- Cited by
- 178
- References
- 37
- FWCI
- 25.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.