CoChat

Estimating product and energy substitution benefits in national‐scale mitigation analyses for Canada

Open access
Smyth, Carolyn, Rampley, Greg, Lemprière, Tony C., Schwab, Olaf, Kurz, Werner A. · 2017 · GCB Bioenergy
Cited by 127

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

The potential of forests and the forest sector to mitigate greenhouse gas (GHG) emissions is widely recognized, but challenging to quantify at a national scale. Mitigation benefits through the use of forest products are affected by product life cycles, which determine the duration of carbon storage in wood products and substitution benefits where emissions are avoided using wood products instead of other emissions‐intensive building products and energy fuels. Here we determined displacement factors for wood substitution in the built environment and bioenergy at the national level in Canada. For solid wood products, we compiled a basket of end‐use products and determined the reduction in emissions for two functionally equivalent products: a more wood‐intensive product vs. a less wood‐intensive one. Avoided emissions for end‐use products basket were weighted by Canadian consumption statistics to reflect national wood uses, and avoided emissions were further partitioned into displacement factors for sawnwood and panels. We also examined two bioenergy feedstock scenarios (constant supply and constrained supply) to estimate displacement factors for bioenergy using an optimized selection of bioenergy facilities which maximized avoided emissions from fossil fuels. Results demonstrated that the average displacement factors were found to be similar: product displacement factors were 0.54 tC displaced per tC of used for sawnwood and 0.45 tC tC−1 for panels; energy displacement factors for the two feedstock scenarios were 0.47 tC tC−1 for the constant supply and 0.89 tC tC−1 for the constrained supply. However, there was a wide range of substitution impacts. The greatest avoided emissions occurred when wood was substituted for steel and concrete in buildings, and when bioenergy from heat facilities and/or combined heat and power facilities was substituted for energy from high‐emissions fossil fuels. We conclude that (1) national‐level substitution benefits need to be considered within a systems perspective on climate change mitigation to avoid the development of policies that deliver no net benefits to the atmosphere, (2) the use of long‐lived wood products in buildings to displace steel and concrete reduces GHG emissions, (3) the greatest bioenergy substitution benefits are achieved using a mix of facility types and capacities to displace emissions‐intensive fossil fuels.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1111/gcbb.12389

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Smyth, C., Rampley, G., Lemprière, T. C., Schwab, O., & Kurz, W. A.
Venue
GCB Bioenergy
Publisher
Wiley
Published
2016-08-29
Volume
9
Issue
6
Pages
1071-1084
ISSN
  • 1757-1693 (ISSN-L)
  • 1757-1707
OpenAlex
W2495443532
Cited by
127
References
4
FWCI
8.04
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.