The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Evaluated Material Properties for a Sintered alpha‐Alumina
Abstract
Results of a data evaluation exercise are presented for a particular specification of sintered alpha‐alumina (mass fraction of Al2O3, ≥0.995; relative density (rho/rhotheoretical), ≥0.98; and nominal grain size, 5 μm). A comprehensive set of material property data is established based on published physical, mechanical, and thermal properties of alumina specimens that conform to the constraints of the material specification. The criteria imposed on the properties are that the values should be derived from independent experimental studies, that the values for physically related properties should be mutually self‐consistent, and that the sets of values should be compatible with established material property relations. The properties assessed in this manner include crystallography, thermal expansion, density, sound velocity, elastic modulus, shear modulus, Poisson's ratio, bulk modulus, compressive strength, flexural strength, Weibull characteristic strength, Weibull modulus, tensile strength, hardness, fracture toughness, creep rate, creep rate stress exponent, creep activation energy, friction coefficient, wear coefficient, melting point, specific heat, thermal conductivity, and thermal diffusivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Guidelines for evaluating and expressing the uncertainty of NIST measurement results
Taylor, B. N. (1994) · National Institute of Standards and Technology, NIST Technical Note 1297 · doi:10.6028/nist.tn.1297 · Cited by 2,833
Material selection for hard coatings
Holleck, H. (1986) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.573700 · Cited by 1,193
The friction and lubrication of solids
Dieter, G. E. (1965) · Journal of the Franklin Institute · doi:10.1016/0016-0032(65)90286-3 · Cited by 584
Alumina chemicals : science and technology handbook
Hart, L. D., & Lense, E. (1990) · American Ceramic Society eBooks · Cited by 247
Design Data for Engineering Ceramics: A Review of the Flexure Test
Quinn, G. D., & Morrell, R. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb08259.x · Cited by 215
Radiation Energy Transfer and Thermal Conductivity of Ceramic Oxides
LEE, D. W., & KINGERY, W. D. (1960) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1960.tb13623.x · Cited by 151
Hasselman, D. P. H., Syed, R., & Tien, T. Y. (1985) · Journal of Materials Science · doi:10.1007/bf00556087 · Cited by 10
Cited by
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Material properties of titanium diboride
Munro, R. G. (2000) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.105.057 · Cited by 948
Self-citationGuan, Q.-F., Yang, H.-B., Han, Z.-M., Zhou, L.-C., Zhu, Y.-B., Ling, Z.-C., Jiang, H.-B., Wang, P.-F., Ma, T., Wu, H.-A., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz1114 · Cited by 356
Jones, A. C., Arns, C. H., Hutmacher, D. W., Milthorpe, B. K., Sheppard, A. P., & Knackstedt, M. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.056 · Cited by 346
Herdem, M. S., Mundhwa, M., Farhad, S., & Hamdullahpur, F. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01280 · Cited by 35
Metadata
- Authors
- Munro, R. G.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1997-08
- Volume
- 80
- Issue
- 8
- Pages
- 1919-1928
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2017653664
- Cited by
- 836
- References
- 7
- FWCI
- 10.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluated Material Properties for a Sintered alpha‐Alumina. https://app.cochat.ai/papers/10.1111/j.1151-2916.1997.tb03074.x
- The paper
- Munro, R. G. (1997). Evaluated Material Properties for a Sintered alpha‐Alumina. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1997.tb03074.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.