Hybrid Time‐Frequency Blind Source Separation Towards Ambient System Identification of Structures
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Ambient system identification in noisy environments, in the presence of low‐energy modes or closely‐spaced modes, is a challenging task. Conventional blind source separation techniques such as second‐order blind identification (SOBI) and Independent Component Analysis (ICA) do not perform satisfactorily under these conditions. Furthermore, structural system identification for flexible structures require the extraction of more modes than the available number of independent sensor measurements. This results in the estimation of a non‐square modal matrix that is spatially sparse. To overcome these challenges, methods that integrate blind identification with time‐frequency decomposition of signals have been previously presented. The basic idea of these methods is to exploit the resolution and sparsity provided by time‐frequency decomposition of signals, while retaining the advantages of second‐order source separation methods. These hybrid methods integrate two powerful time‐frequency decompositions—wavelet transforms and empirical mode decomposition—into the framework of SOBI. In the first case, the measurements are transformed into the time‐frequency domain, followed by the identification using a SOBI‐based method in the transformed domain. In the second case, a subset of the operations are performed in the transformed domain, while the remaining procedure is conducted using the traditional SOBI method. A new method to address the under‐determined case arising from sparse measurements is proposed. Each of these methods serve to address a particular situation: closely‐spaced modes or low‐energy modes. The proposed methods are verified by applying them to extract the modal information of an airport control tower structure located near Toronto in Canada.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Parametric study and simplified design of tuned mass dampers
Rana, R., & Soong, T. T. (1998) · Engineering Structures · doi:10.1016/s0141-0296(97)00078-3 · Cited by 651 · cited 1×
“…to identify structures equipped with TMDs stems from the fact that the condition assessment and correction for de-tuning in TMDs involves identification of the primary structure modes from measurements obtained from the structure equipped with a TMD (Rana and Soong, 1998; Lin et al., 2010).”
BackgroundPerformance of tuned mass dampers under wind loads
Kwok, K. C. S., & Samali, B. (1995) · Engineering Structures · doi:10.1016/0141-0296(95)00035-6 · Cited by 206
Research works printed but not linked: 33
- Adeli, 2006, Dynamic fuzzy wavelet neural network model for structural system identification, Journal of Structural Engineering, ASCE, 132, 102, 10.1061/(ASCE)0733-9445(2006)132:1(102) · doi:10.1061/(asce)0733-9445(2006)132:1(102 · Paper page
- Antoni, 2005, Blind separation of vibration components: principles and demonstrations, Mechanical Systems and Signal Processing, 19, 1166, 10.1016/j.ymssp.2005.08.008 · DOI · Paper page
- Belouchrani, 1997, A blind source separation technique using second‐order statistics, IEEE Transactions on Signal Processing, IEEE, 45, 434, 10.1109/78.554307 · DOI · Paper page
- Bocca, 2011, A synchronized wireless sensor network for experimental modal analysis in structural health monitoring, Computer-Aided Civil and Infrastructure Engineering, 26, 10.1111/j.1467-8667.2011.00718.x · DOI
- Brownjohn, 2003, Ambient vibration studies for system identification of tall buildings, Earthquake Engineering and Structural Dynamics, 32, 71, 10.1002/eqe.215 · DOI · Paper page
- Caicedo, 2004, Natural excitation technique and eigensystem realization algorithm for phase i of the IASC‐ASCE benchmark problem: simulated data, Journal of Engineering Mechanics, ASCE, 130, 49, 10.1061/(ASCE)0733-9399(2004)130:1(49) · doi:10.1061/(asce)0733-9399(2004)130:1(49 · Paper page
- Correa‐Kijewski, 2007, Dynamic behaviour of tall buildings under wind: insights from full‐scale monitoring, Structural Design of Tall and Special Buildings, 16, 471, 10.1002/tal.415 · doi:10.1002/tal.415
- Cruz, 2008, Performance of vibration‐based damage detection methods in bridges, Computer-Aided Civil and Infrastructure Engineering, 24, 62, 10.1111/j.1467-8667.2008.00546.x · DOI · Paper page
- Gangone, 2011, Wireless monitoring of a multi‐span bridge superstructure for diagnostic load testing and system identification, Computer-Aided Civil and Infrastructure Engineering, 26, 10.1111/j.1467-8667.2010.00711.x · DOI
- Hazra, 2010, Wavelet‐based blind identification of the UCLA Factor building using ambient and earthquake responses, Smart Materials and Structures, 19, 10.1088/0964-1726/19/2/025005 · doi:10.1088/0964-1726/19/2/025005
- Hazra, 2010, Modified cross‐correlation method for the blind identification of structures, Journal of Engineering Mechanics, 136, 889, 10.1061/(ASCE)EM.1943-7889.0000133 · DOI
- Hazra, 2010, Re‐tuning tuned mass dampers using ambient vibration measurements, Smart Materials and Structures, 10.1088/0964-1726/19/11/115002 · DOI
- He, 2008, Modal identification study of Vincent Thomas Bridge using simulated wind‐induced ambient vibration data, Computer-Aided Civil and Infrastructure Engineering, 23, 373, 10.1111/j.1467-8667.2008.00544.x · DOI
- Huang, 1998, The empirical mode decomposition for the Hilbert spectrum for nonlinear and non‐stationary time series analysis, Proceedings of Royal Society of London Series A, 454, 903, 10.1098/rspa.1998.0193 · DOI · Paper page
- Ibrahim, 1973, A time domain modal vibration test technique, Shock and Vibration Bulletin, 43, 21
- James, 1995, The natural excitation technique (NET) for modal parameter extraction from operating structures, Modal Analysis, 10, 260
- Jiang, 2005, Dynamic wavelet neural network for nonlinear identification of highrise buildings, Computer-Aided Civil and Infrastructure Engineering, 20, 316, 10.1111/j.1467-8667.2005.00399.x · DOI · Paper page
- Jiang, 2007, Bayesian wavelet packet denoising for structural system identification, Computer-Aided Civil and Infrastructure Engineering, 14, 333
- Kareem, 1999, Mitigation of motions of tall buildings with specific examples of recent applications, Wind and Structures, 2, 201, 10.12989/was.1999.2.3.201 · DOI · Paper page
- Kela, 2009, Recent studies of adaptive tuned vibration absorbers/neutralizers, Applied Mechanics Reviews, 62, 1, 10.1115/1.3183639 · DOI
- Kerschen, 2007, Physical interpretation of independent component analysis in structural dynamics, Mechanical Systems and Signal Processing, 21, 1561, 10.1016/j.ymssp.2006.07.009 · DOI
- Kijewski, 2003, Wavelet transforms for system identification in civil engineering, Computer-Aided Civil and Infrastructure Engineering, 18, 339, 10.1111/1467-8667.t01-1-00312 · DOI · Paper page
- Kisilev, 2003, Multiscale framework for blind separation of linearly mixed signals, Journal of Machine Learning Research, 1, 1
- Lin, 2010, Vibration control of structures with initially accelerated passive tuned mass dampers under near‐fault earthquake excitation, Computer-Aided Civil and Infrastructure Engineering, 25, 69, 10.1111/j.1467-8667.2009.00607.x · DOI · Paper page
- Lin, 2001, Vibration control identification of seismically excited M.D.O.F. structure‐PTMD systems, Journal of Sound and Vibration, 240, 87, 10.1006/jsvi.2000.3188 · DOI
- Moaveni, 2009, Uncertainty and sensitivity analysis of damage identification results obtained using finite element model updating, Computer-Aided Civil and Infrastructure Engineering, 24, 320, 10.1111/j.1467-8667.2008.00589.x · DOI
- Siringoringo, 2009, Noncontact operational modal analysis of structural members by laser doppler vibrometer, Computer-Aided Civil and Infrastructure Engineering, 24, 249, 10.1111/j.1467-8667.2008.00585.x · doi:10.1111/j.1467-8667.2008.00585.x
- Skolnik, 2006, Identification, model updating, and response prediction of an instrumented 15‐story steel‐frame building, Earthquake Spectra, Earthquake Engineering Research Institute, 22, 781, 10.1193/1.2219487 · DOI
- Soyoz, 2009, Long‐term monitoring and identification of bridge structural parameters, Computer-Aided Civil and Infrastructure Engineering, 24, 82, 10.1111/j.1467-8667.2008.00572.x · DOI · Paper page
- Spencer, 2003, State of the art of structural control, Journal of Structural Engineering, ASCE, 129, 845, 10.1061/(ASCE)0733-9445(2003)129:7(845) · doi:10.1061/(asce)0733-9445(2003)129:7(845
- Yang, 2003, System identification of linear structures based on Hilbert Huang spectral analysis. Part 1: normal modes, Earthquake Engineering Structural Dynamics, 32, 1443, 10.1002/eqe.287 · DOI · Paper page
- Zhou, 2007, Blind source separation based vibration mode identification, Mechanical Systems and Signal Processing, 21, 3072, 10.1016/j.ymssp.2007.05.007 · DOI
- Zibulevsky, 2001, Blind source separation by sparse decomposition, Neural Computations, 13, 863, 10.1162/089976601300014385 · DOI · Paper page
Cited by
Signal Processing Techniques for Vibration-Based Health Monitoring of Smart Structures
Amezquita-Sanchez, J. P., & Adeli, H. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-014-9135-7 · Cited by 487
3D displacement measurement model for health monitoring of structures using a motion capture system
Park, S. W., Park, H. S., Kim, J. H., & Adeli, H. (2015) · Measurement · doi:10.1016/j.measurement.2014.09.063 · Cited by 300
Perez-Ramirez, C. A., Amezquita-Sanchez, J. P., Valtierra-Rodriguez, M., Adeli, H., Dominguez-Gonzalez, A., & Romero-Troncoso, R. J. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.10.065 · Cited by 288
System identification in structural engineering
Sirca, G. F., & Adeli, H. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.09.002 · Cited by 190
Sadhu, A., Narasimhan, S., & Antoni, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.001 · Cited by 178
Self-citation
Metadata
- Authors
- Hazra, B., Sadhu, A., Roffel, A. J., & Narasimhan, S.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2011-09-22
- Volume
- 27
- Issue
- 5
- Pages
- 314-332
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W1899685495
- Cited by
- 95
- References
- 2
- FWCI
- 30.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor, 5065 d)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.