The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Piezoelectric Materials for High Temperature Sensors
Abstract
Piezoelectric materials that can function at high temperatures without failure are desired for structural health monitoring and/or nondestructive evaluation of the next generation turbines, more efficient jet engines, steam, and nuclear/electrical power plants. The operational temperature range of smart transducers is limited by the sensing capability of the piezoelectric material at elevated temperatures, increased conductivity and mechanical attenuation, variation of the piezoelectric properties with temperature. This article discusses properties relevant to sensor applications, including piezoelectric materials that are commercially available and those that are under development. Compared to ferroelectric polycrystalline materials, piezoelectric single crystals avoid domain‐related aging behavior, while possessing high electrical resistivities and low losses, with excellent thermal property stability. Of particular interest is oxyborate [ ReCa 4 O ( BO 3 ) 3 ] single crystals for ultrahigh temperature applications (>1000°C). These crystals offer piezoelectric coefficients d eff , and electromechanical coupling factors k eff , on the order of 3–16 pC/N and 6%–31%, respectively, significantly higher than those values of α‐quartz piezocrystals (~2 pC/N and 8%). Furthermore, the absence of phase transitions prior to their melting points ~1500°C, together with ultrahigh electrical resistivities (>10 6 Ω·cm at 1000°C) and thermal stability of piezoelectric properties (< 20% variations in the range of room temperature ~1000°C), allow potential operation at extreme temperature and harsh environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals
Park, S.-E., & Shrout, T. R. (1997) · Journal of Applied Physics · doi:10.1063/1.365983 · Cited by 4,157
Dielectric polarizabilities of ions in oxides and fluorides
Shannon, R. D. (1993) · Journal of Applied Physics · doi:10.1063/1.353856 · Cited by 2,798
(1971) · Elsevier eBooks · doi:10.1016/b978-0-12-379550-2.x5001-7 · Cited by 2,732
Elastic properties of zinc-blende and wurtzite AlN, GaN, and InN
Wright, A. F. (1997) · Journal of Applied Physics · doi:10.1063/1.366114 · Cited by 1,027
Thin Film Piezoelectrics for MEMS
Trolier-McKinstry, S., & Muralt, P. (2004) · Journal of Electroceramics · doi:10.1023/b:jecr.0000033998.72845.51 · Cited by 1,023
Piezoelectric Crystals and Their Applications to Ultrasonics
Mason, W. P., & Baerwald, H. (1951) · Physics Today · doi:10.1063/1.3067231 · Cited by 933
Properties of materials: anisotropy, symmetry, structure
(2005) · Choice Reviews Online · doi:10.5860/choice.42-6504 · Cited by 869
Current status and prospects of lead-free piezoelectric ceramics
Takenaka, T., & Nagata, H. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.125 · Cited by 868
Piezoelectric Sensors and Sensor Materials
Tressler, J. F., Alkoy, S., & Newnham, R. E. (1998) · Journal of Electroceramics · doi:10.1023/a:1009926623551 · Cited by 714
Cited by
Transferring lead-free piezoelectric ceramics into application
Rödel, J., Webber, K. G., Dittmer, R., Jo, W., Kimura, M., & Damjanovic, D. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.12.013 · Cited by 1,323
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
Zhang, S., Li, F., Jiang, X., Kim, J., Luo, J., & Geng, X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.002 · Cited by 875
Self-citationRecent progress of the Computational 2D Materials Database (C2DB)
Gjerding, M. N., Taghizadeh, A., Rasmussen, A., Ali, S., Bertoldo, F., Deilmann, T., Knøsgaard, N. R., Kruse, M., Larsen, A. H., Manti, S., et al. (2021) · 2D Materials · doi:10.1088/2053-1583/ac1059 · Cited by 575
Cao, M., Wang, X., Zhang, M., Cao, W., Fang, X., & Yuan, J. (2020) · Advanced Materials · doi:10.1002/adma.201907156 · Cited by 441
Metadata
- Authors
- Zhang, S., & Yu, F.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2011-08-29
- Volume
- 94
- Issue
- 10
- Pages
- 3153-3170
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2129343984
- Cited by
- 921
- References
- 34
- FWCI
- 15.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Piezoelectric Materials for High Temperature Sensors. https://app.cochat.ai/papers/10.1111/j.1551-2916.2011.04792.x
- The paper
- Zhang, S., & Yu, F. (2011). Piezoelectric Materials for High Temperature Sensors. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.2011.04792.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.