The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Cold Sintering Process: A Novel Technique for Low‐Temperature Ceramic Processing of Ferroelectrics
Abstract
Research on sintering of dense ceramic materials has been very active in the past decades and still keeps gaining in popularity. Although a number of new techniques have been developed, the sintering process is still performed at high temperatures. Very recently we established a novel protocol, the “Cold Sintering Process ( CSP )”, to achieve dense ceramic solids at extraordinarily low temperatures of <300°C. A wide variety of chemistries and composites were successfully densified using this technique. In this article, a comprehensive CSP tutorial will be delivered by employing three classic ferroelectric materials ( KH 2 PO 4 , Na NO 2 , and BaTiO 3 ) as examples. Together with detailed experimental demonstrations, fundamental mechanisms, as well as the underlying physics from a thermodynamics perspective, are collaboratively outlined. Such an impactful technique opens up a new way for cost‐effective and energy‐saving ceramic processing. We hope that this article will provide a promising route to guide future studies on ultralow temperature ceramic sintering or ceramic materials related integration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry and Properties of Nanocrystals of Different Shapes
Burda, C., Chen, X., Narayanan, R., & El-Sayed, M. A. (2005) · Chemical Reviews · doi:10.1021/cr030063a · Cited by 7,230
Perspective on the Development of Lead‐free Piezoceramics
Rödel, J., Jo, W., Seifert, K. T. P., Anton, E., Granzow, T., & Damjanovic, D. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03061.x · Cited by 2,998
German, R. M. (1996) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,502
MERZ, W. J. (1972) · Nature · doi:10.1038/236245a0 · Cited by 2,440
Dielectric properties of fine-grained barium titanate ceramics
Arlt, G., Hennings, D., & de With, G. (1985) · Journal of Applied Physics · doi:10.1063/1.336051 · Cited by 1,957
Colloid Transport by Interfacial Forces
Anderson, J. L. (1989) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.21.010189.000425 · Cited by 1,612
Wu, J., Xiao, D., & Zhu, J. (2015) · Chemical Reviews · doi:10.1021/cr5006809 · Cited by 1,608
Dynamics and stability of thin liquid films
Craster, R. V., & Matar, O. K. (2009) · Reviews of Modern Physics · doi:10.1103/revmodphys.81.1131 · Cited by 1,441
Phase relationships in the zirconia-yttria system
Scott, H. G. (1975) · Journal of Materials Science · doi:10.1007/bf01031853 · Cited by 1,282
Interfacial turbulence: Hydrodynamic instability and the marangoni effect
Sternling, C. V., & Scriven, L. E. (1959) · AIChE Journal · doi:10.1002/aic.690050421 · Cited by 1,036
Combustion synthesis and nanomaterials
Aruna, S. T., & Mukasyan, A. S. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2008.12.002 · Cited by 970
Combustion synthesis: an update
Patil, K. C., Aruna, S. T., & Mimani, T. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00123-7 · Cited by 907
Grain-size effect on structure and phase transformations for barium titanate
Frey, M. H., & Payne, D. A. (1996) · Physical Review B · doi:10.1103/physrevb.54.3158 · Cited by 903
Grain-size effects on the ferroelectric behavior of dense nanocrystallineBaTiO3ceramics
Zhao, Z., Buscaglia, V., Viviani, M., Buscaglia, M. T., Mitoseriu, L., Testino, A., Nygren, M., Johnsson, M., & Nanni, P. (2004) · Physical Review B · doi:10.1103/physrevb.70.024107 · Cited by 901
The Role of Hydrothermal Synthesis in Preparative Chemistry
Rabenau, A. (1985) · Angewandte Chemie International Edition in English · doi:10.1002/anie.198510261 · Cited by 853
Handbook of Hydrothermal Technology
(2013) · Elsevier eBooks · doi:10.1016/c2009-0-20354-0 · Cited by 725
Pressure solution and the force of crystallization: a phenomenological theory
Weyl, P. K. (1959) · Journal of Geophysical Research · doi:10.1029/jz064i011p02001 · Cited by 593
Phenomenological Theory of High Permittivity in Fine‐Grained Barium Titanate
BUESSEM, W. R., CROSS, L. E., & GOSWAMI, A. K. (1966) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1966.tb13144.x · Cited by 538
Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics
Guo, J., Guo, H., Baker, A. L., Lanagan, M. T., Kupp, E. R., Messing, G. L., & Randall, C. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605443 · Cited by 514
Self-citationSurface-Tension-Driven Phenomena
Levich, V. G., & Krylov, V. S. (1969) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.01.010169.001453 · Cited by 461
Phenomenological Theory of High Permittivity in Fine‐Grained Barium Titanate
BUESSEM, W. R., CROSS, L. E., & GOSWAMI, A. K. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb04362.x · Cited by 446
(1959) · Industrial & Engineering Chemistry · doi:10.1021/i650590a791 · Cited by 378
Origins of concentration gradients for diffusiophoresis
Velegol, D., Garg, A., Guha, R., Kar, A., & Kumar, M. (2016) · Soft Matter · doi:10.1039/c6sm00052e · Cited by 356
Van Santen, R. A. (1984) · The Journal of Physical Chemistry · doi:10.1021/j150668a002 · Cited by 351
Microwave Sintering of Ceramics
Katz, J. (1992) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.22.1.153 · Cited by 339
Guo, J., Berbano, S. S., Guo, H., Baker, A. L., Lanagan, M. T., & Randall, C. A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602489 · Cited by 322
Self-citationThe Origins of Ceramic Technology at Dolni Věstonice, Czechoslovakia
Vandiver, P. B., Soffer, O., Klima, B., & Svoboda, J. (1989) · Science · doi:10.1126/science.246.4933.1002 · Cited by 302
On creep enhanced by a liquid phase
Pharr, G. M., & Ashby, M. F. (1983) · Acta Metallurgica · doi:10.1016/0001-6160(83)90072-x · Cited by 251
Guo, H., Baker, A., Guo, J., & Randall, C. A. (2016) · ACS Nano · doi:10.1021/acsnano.6b03800 · Cited by 239
Self-citationSedimentary Rocks in the Field: A Colour Guide
Stow, D. A. V. (2005) · CRC Press eBooks · doi:10.1201/b15204 · Cited by 218
Hydrothermal synthesis of fine oxide powders
Sōmiya, S., & Roy, R. (2000) · Bulletin of Materials Science · doi:10.1007/bf02903883 · Cited by 202
Takahashi, H., Numamoto, Y., Tani, J., Matsuta, K., Qiu, J., & Tsurekawa, S. (2006) · Japanese Journal of Applied Physics · doi:10.1143/jjap.45.l30 · Cited by 201
Barium Titanate Piezoelectric Ceramics Manufactured by Two-Step Sintering
Karaki, T., Yan, K., & Adachi, M. (2007) · Japanese Journal of Applied Physics · doi:10.1143/jjap.46.7035 · Cited by 196
Sawada, S., Nomura, S., Fujii, S., & Yoshida, I. (1958) · Physical Review Letters · doi:10.1103/physrevlett.1.320 · Cited by 184
Chester, R. (1993) · Chemical Geology · doi:10.1016/0009-2541(93)90083-u · Cited by 183
Dielectric Properties of Lithium Molybdate Ceramic Fabricated at Room Temperature
Kähäri, H., Teirikangas, M., Juuti, J., & Jantunen, H. M. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13277 · Cited by 160
Ferroelectric properties of dense nanocrystalline BaTiO3ceramics
Buscaglia, M. T., Buscaglia, V., Viviani, M., Petzelt, J., Savinov, M., Mitoşeriu, L., Testino, A., Nanni, P., Harnagea, C., Zhe Zhao, B., et al. (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/001 · Cited by 149
Structure property relationships in core-shell BaTiO3–LiF ceramics
Randall, C. A., Wang, S. F., Laubscher, D., Dougherty, J. P., & Huebner, W. (1993) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1993.0871 · Cited by 123
Self-citationKinetics and Mechanism of Aqueous Chemical Synthesis of BaTiO3 Particles
Testino, A., Buscaglia, M. T., Buscaglia, V., Viviani, M., Bottino, C., & Nanni, P. (2004) · Chemistry of Materials · doi:10.1021/cm031130k · Cited by 122
Sintering of nanocrystalline BaTiO3
Kim, H. T., & Han, Y. H. (2004) · Ceramics International · doi:10.1016/j.ceramint.2003.12.141 · Cited by 121
Hydrothermal precipitation and characterization of nanocrystalline BaTiO3 particles
Çiftçi, E., Rahaman, M. N., & Shumsky, M. G. (2001) · Journal of Materials Science · doi:10.1023/a:1011828018247 · Cited by 116
Boulos, M., Guillemet‐Fritsch, S., MATHIEU, F., DURAND, B., Lebey, T., & Bley, V. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.02.024 · Cited by 110
Materials with fine microstructures by advanced powder metallurgy
Gutmanas, E. Y. (1990) · Progress in Materials Science · doi:10.1016/0079-6425(90)90003-r · Cited by 105
Utilizing the Cold Sintering Process for Flexible–Printable Electroceramic Device Fabrication
Baker, A. L., Guo, H., Guo, J., & Randall, C. A. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14467 · Cited by 95
Self-citation(2002) · Choice Reviews Online · doi:10.5860/choice.39-3383 · Cited by 86
Coupling between pressure solution creep and diffusive mass transport in porous rocks
Gundersen, E., Renard, F., Dysthe, D. K., Bjørlykke, K. O., & Jamtveit, B. (2002) · Journal of Geophysical Research Atmospheres · doi:10.1029/2001jb000287 · Cited by 85
Sharifi-Mood, N., Koplik, J., & Maldarelli, C. (2013) · Physics of Fluids · doi:10.1063/1.4772978 · Cited by 80
Cited by
Nunes, S. P., Culfaz-Emecen, P. Z., Ramon, G. Z., Visser, T., Koops, G. H., Jin, W., & Ulbricht, M. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117761 · Cited by 605
A review of cold sintering processes
Grasso, S., Biesuz, M., Zoli, L., Taveri, G., Duff, A. I., Ke, D., Jiang, A., & Reece, M. J. (2020) · Advances in Applied Ceramics · doi:10.1080/17436753.2019.1706825 · Cited by 283
Hu, Y., Xia, D., Shen, H., Nan, J., Ma, N., Guo, Z., Wang, X., & Jin, Q. (2023) · Ceramics International · doi:10.1016/j.ceramint.2022.12.014 · Cited by 23
Construction of Inorganic Bulks through Coalescence of Particle Precursors
Mu, Z., Tang, R., & Liu, Z. (2021) · Nanomaterials · doi:10.3390/nano11010241 · Cited by 20
Metadata
- Authors
- Guo, H., Baker, A., Guo, J., & Randall, C. A.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2016-10-13
- Volume
- 99
- Issue
- 11
- Pages
- 3489-3507
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2530181669
- Cited by
- 426
- References
- 47
- FWCI
- 23.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.