Lithium aluminum‐layered double hydroxide chlorides ( LDH ): Formation enthalpies and energetics for lithium ion capture
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Layered aluminum double hydroxide chloride sorbents, LiCl∙Al 2 ( OH ) 6 . nH 2 O, Li‐ LDH , have shown promising application in selective Li extraction from geothermal brines. Maintaining LiCl uptake capacity and retaining a long cycle life are critical to widespread application of sorbent materials. To elucidate the energetics of Li capture, enthalpies of LDH with different Li content have been measured by acid solution calorimetry. The formation enthalpies generally become less exothermic as the Li content increases, which indicates that Li intercalation destabilizes the structure, and the enthalpies seem to approach a limit after the Li content x = 2Li/Al exceeds 1. To improve stability, metal doping of the aluminum LDH structure with iron was performed. Introduction of a metal with greater electron density but a similar ionic radius was postulated to improve the stability of the LDH crystal structure. The calorimetric results from Fe‐doped LDH samples corroborate this as they are more exothermic than LDH ‐lacking Fe. This suggests that Fe doping is an effective way to stabilize the LDH phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Paranthaman, M. P., Li, L., Luo, J., Hoke, T., Ucar, H., Moyer, B. A., & Harrison, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03464 · Cited by 293
Self-citationRyu, T., Haldorai, Y., Rengaraj, A., Shin, J., Hong, H.-J., Lee, G.-W., Han, Y.-K., Huh, Y. S., & Chung, K.-S. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01632 · Cited by 96
Cited by
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
“Crystal structure of lithium–aluminum double hydroxide (Li Al2(OH)6 Cl) [126].”
BackgroundMetal-based adsorbents for lithium recovery from aqueous resources
Yu, H., Naidu, G., Zhang, C., Wang, C., Razmjou, A., Han, D. S., He, T., & Shon, H. (2022) · Desalination · doi:10.1016/j.desal.2022.115951 · Cited by 176
Life Cycle Assessment and Techno-Economic Assessment of Lithium Recovery from Geothermal Brine
Huang, T.-Y., Pérez-Cardona, J. R., Zhao, F., Sutherland, J. W., & Paranthaman, M. P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08733 · Cited by 104
Self-citationGoldberg, V., Kluge, T., & Nitschke, F. (2022) · Grundwasser · doi:10.1007/s00767-022-00522-5 · Cited by 20
Metadata
- Authors
- Wu, L., Li, L., Evans, S. F., Eskander, T. A., Moyer, B. A., Hu, Z., Antonick, P. J., Harrison, S., Paranthaman, M. P., Riman, R., & Navrotsky, A.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2018-10-25
- Volume
- 102
- Issue
- 5
- Pages
- 2398-2404
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2895964648
- Cited by
- 59
- References
- 2
- FWCI
- 1.08
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.