The DOI matches its Crossref record.
Rethinking Hydrodynamic Assessments for River Infrastructures: Are Simplified Methods Leaving Bridges Exposed?
Abstract
Bridge owners and regulatory agencies have a duty to assess risks derived from hydraulic actions including scour, uplift, drag, debris impact, deck displacement, and other consequences that can lead to a loss in the load carrying capacity of a bridge. In the UK, the CS469 (Management of scour and other hydraulic actions at highway structures) is the standard for the assessment of hydraulic actions to highway bridges. The methodology in CS469 for the calculation of the hydraulic characteristics of the flow at critical cross‐sections within the channel and the bridge crossing, although simplistic by design to minimize computational effort, is intrinsically inaccurate since it makes use of unrealistic (i.e., non‐physically based) approximations. This results in estimations of risk and vulnerability levels that could include high levels of uncertainty. In this paper, we propose to bypass these approximated hydraulic calculations by harnessing the computational power of 2D hydraulic models, which would not require any additional field data collection than needed for the original CS469 method. We recommend a fully 2D HEC‐RAS model with the inclusion of bridges as 1D elements within the flow areas and only requiring publicly available data or data obtained from existing assessments in order to future‐proof the approaches and adhere to an open‐source/open‐access philosophy, but also imposing only a marginal increase in cost for bridge management teams. Results from the two models—2D HEC‐RAS and the existing approach in CS469, are compared for a number of real‐world bridges. The comparisons show that the estimations by HEC‐RAS are substantially higher for water depth (up to 138%) and lower for flow velocity (down by 58%). When these values are applied to the estimation of hydraulic vulnerability and scour risk, the differences are significant. Scour depths with the use of HEC‐RAS models are typically much lower (up to 3.9 m, and on average 1.7 m) than with simplified hydraulic equations, and this translates into lower (yet, more appropriate) scour risk levels. Hydraulic vulnerability to submergence of the assessed bridges is also assessed very differently, typically higher by the 2D model method. Overall, the results show that 2D numerical hydraulic simulations present a much more accurate estimation than existing methods, better balancing risks deriving from scour and hydrodynamic actions and with comparable effort and data requirements. The model displays consistency across an exhaustive set of simulations for a range of variables and bridges, showing limited variability and proneness to errors, whilst values estimated by CS469 are in most cases significantly different. Future versions of CS469 and similar documents should prioritize this methodology to provide a more accurate and realistic risk estimation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This approach thereby provides an alternative solution to hydrologicalhydraulic modelling, which is practically computationally unsustainable if performed with high-resolution data over large areas (Panici et al. 2025).”
From Assessing road-watercourse crossing overtopping potential using GIS and remote sensing: a large-scale screening approach (2026) · cites this paper as Panici et al. 2025
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 32
- 10.1680/feng.13.00022 · doi:10.1680/feng.13.00022
- 10.1080/15732479.2023.2171069 · doi:10.1080/15732479.2023.2171069
- 10.1007/s11069‐008‐9277‐8 · DOI · Paper page
- 10.1680/feng.2013.166.4.163 · doi:10.1680/feng.2013.166.4.163
- 10.1016/j.engstruct.2020.111115 · DOI
- Chow V. T., 1959, Open Channel Hydraulics
- CSA, 2019, CSA S6 Canadian Highway Bridge Design Code
- FHWA.2012.HEC18—Evaluating Scour at Bridges Fifth Edition(Version Hydraulic Engineering Circular 18).
- FHWA, 2019, Overview of Practices for Adopting 2D Hydraulic Modeling
- 10.1186/s43251‐023‐00081‐6 · doi:10.1186/s43251-023-00081-6
- 10.1016/j.engstruct.2014.07.021 · DOI
- 10.1111/risa.13370 · doi:10.1111/risa.13370
- 10.1680/feng.2012.165.1.39 · DOI
- 10.1061/(ASCE)HY.1943‐7900.0001943 · doi:10.1061/(asce)hy.1943-7900.0001943
- 10.1061/JHEND8.HYENG‐13397 · doi:10.1061/jhend8.hyeng-13397
- Melville B. W.1992.“Local Scour at Bridge Abutments.” · doi:10.1061/(asce)0733-9429(1992)118:4(615
- National bridge inspection standards (No. Title 23 Chapter I Subchapter G Part 650 Subpart C).2022.“U.S. Department of Transportation.”
- 10.1029/2017WR022177 · doi:10.1029/2017wr022177
- 10.1029/2022WR033531 · doi:10.1029/2022wr033531
- 10.1016/j.scitotenv.2020.138575 · doi:10.1016/j.scitotenv.2020.138575
- 10.3390/app14177882 · doi:10.3390/app14177882
- 10.1016/j.engstruct.2019.05.035 · DOI
- 10.1080/15732479.2022.2081709 · DOI
- 10.1080/23789689.2023.2175141 · doi:10.1080/23789689.2023.2175141
- 10.5194/nhess‐22‐1559‐2022 · DOI
- 10.1080/15732479.2021.1899249 · DOI
- 10.1680/jbren.20.00024 · doi:10.1680/jbren.20.00024
- 10.1061/(ASCE)HY.1943‐7900.0002005 · doi:10.1061/(asce)hy.1943-7900.0002005
- 10.5194/nhess‐22‐795‐2022 · DOI
- Waka Kotahi NZ Transport Agency, 2022, Bridge Manual SP/M/022
- 10.1007/s11069‐017‐2842‐2 · doi:10.1007/s11069-017-2842-2
- 10.1007/s11069‐022‐05527‐0 · doi:10.1007/s11069-022-05527-0
Cited by
Amaddii, M., Castelli, F., & Arrighi, C. (2026) · Natural Hazards · doi:10.1007/s11069-025-07907-8 · Cited by 3
Metadata
- Authors
- Panici, D., Kripakaran, P., & Brazier, R. E.
- Venue
- Journal of Flood Risk Management
- Publisher
- Wiley
- Published
- 2025-07-20
- Volume
- 18
- Issue
- 3
- ISSN
- 1753-318X
- Cited by
- 1
- References
- 0
- Language
- en
- Funders
- Engineering and Physical Sciences Research Council (EP/R511699/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.