The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Deep neural network with high‐order neuron for the prediction of foamed concrete strength
Open accessAbstract
The article presents a deep neural network model for the prediction of the compressive strength of foamed concrete. A new, high‐order neuron was developed for the deep neural network model to improve the performance of the model. Moreover, the cross‐entropy cost function and rectified linear unit activation function were employed to enhance the performance of the model. The present model was then applied to predict the compressive strength of foamed concrete through a given data set, and the obtained results were compared with other machine learning methods including conventional artificial neural network (C‐ANN) and second‐order artificial neural network (SO‐ANN). To further validate the proposed model, a new data set from the laboratory and a given data set of high‐performance concrete were used to obtain a higher degree of confidence in the prediction. It is shown that the proposed model obtained a better prediction, compared to other methods. In contrast to C‐ANN and SO‐ANN, the proposed model can genuinely improve its performance when training a deep neural network model with multiple hidden layers. A sensitivity analysis was conducted to investigate the effects of the input variables on the compressive strength. The results indicated that the compressive strength of foamed concrete is greatly affected by density, followed by the water‐to‐cement and sand‐to‐cement ratios. By providing a reliable prediction tool, the proposed model can aid researchers and engineers in mixture design optimization of foamed concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Deep learning in neural networks: an overview
Schmidhuber, J. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.003 · Cited by 18,570
Practical Recommendations for Gradient-Based Training of Deep Architectures
Bengio, Y. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-35289-8_26 · Cited by 2,259
Modeling of strength of high-performance concrete using artificial neural networks
Yeh, I.-C. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00165-3 · Cited by 1,447
A classification of studies on properties of foam concrete
Ramamurthy, K., Nambiar, E. K. K., & Gandhi, I. S. R. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.04.006 · Cited by 1,179
Machine Learning: An Algorithmic Perspective
Marsland, S. (2009) · Cited by 1,068
Neural Networks and Deep Learning
Theodoridis, S. (2015) · Machine Learning · doi:10.1016/b978-0-12-801522-3.00018-5 · Cited by 900
Neural Networks in Civil Engineering: 1989–2000
Adeli, H. (2001) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/0885-9507.00219 · Cited by 884
Deep Transfer Learning for Image‐Based Structural Damage Recognition
Gao, Y., & Mosalam, K. M. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12363 · Cited by 766
Naderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603
Machine learning in concrete strength simulations: Multi-nation data analytics
Chou, J.-S., Tsai, C.-F., Pham, A.-D., & Lu, Y.-H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.054 · Cited by 472
Predicting compressive strength of lightweight foamed concrete using extreme learning machine model
Yaseen, Z. M., Deo, R. C., Hilal, A., Abd, A. M., Bueno, L. C., Salcedo-Sanz, S., & Nehdi, M. L. (2018) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.09.004 · Cited by 434
Neural Networks and Deep Learning: A Textbook
Aggarwal, C. C. (2018) · doi:10.1007/978-3-319-94463-0 · Cited by 417
Rafiei, M. H., & Adeli, H. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2017.10.070 · Cited by 401
Bui, D.-K., Nguyen, T., Chou, J.-S., Nguyen-Xuan, H., & Ngo, T. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.201 · Cited by 395
Self-citationChou, J.-S., & Pham, A.-D. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.078 · Cited by 360
Computational design optimization of concrete mixtures: A review
DeRousseau, M. A., Kasprzyk, J. R., & Srubar, W. V. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.007 · Cited by 359
Xue, Y., & Li, Y. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12367 · Cited by 347
A novel machine learning‐based algorithm to detect damage in high‐rise building structures
Rafiei, M. H., & Adeli, H. (2017) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.1400 · Cited by 346
A probabilistic neural network for earthquake magnitude prediction
Adeli, H., & Panakkat, A. (2009) · Neural Networks · doi:10.1016/j.neunet.2009.05.003 · Cited by 336
Supervised Deep Restricted Boltzmann Machine for Estimation of Concrete
(2017) · ACI Materials Journal · doi:10.14359/51689560 · Cited by 278
A new predictive model for compressive strength of HPC using gene expression programming
Mousavi, S. M., Aminian, P., Gandomi, A. H., Alavi, A. H., & Bolandi, H. (2012) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2011.09.014 · Cited by 243
Enhancing the strength of pre-made foams for foam concrete applications
Hajimohammadi, A., Ngo, T., & Mendis, P. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.12.014 · Cited by 236
Self-citationNeural network model for rapid forecasting of freeway link travel time
Dharia, A., & Adeli, H. (2003) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2003.09.011 · Cited by 231
Nguyen, T. T., Bui, H. H., Ngo, T. D., & Nguyen, G. D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.054 · Cited by 184
Self-citationPore characteristics in one-part mix geopolymers foamed by H 2 O 2 : The impact of mix design
Hajimohammadi, A., Ngo, T., Mendis, P., Nguyen, T., Kashani, A., & van Deventer, J. S. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.084 · Cited by 181
Self-citationPanakkat, A., & Adeli, H. (2009) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/j.1467-8667.2009.00595.x · Cited by 180
Prediction of Bus Travel Time Using Random Forests Based on Near Neighbors
Yu, B., Wang, H., Shan, W., & Yao, B. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12315 · Cited by 179
Analysis of Strength of Concrete Using Design of Experiments and Neural Networks
Yeh, I.-C. (2006) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2006)18:4(597 · Cited by 163
Koziarski, M., & Cyganek, B. (2017) · Integrated Computer-Aided Engineering · doi:10.3233/ica-170551 · Cited by 160
Regulating the chemical foaming reaction to control the porosity of geopolymer foams
Hajimohammadi, A., Ngo, T., Mendis, P., & Sanjayan, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.026 · Cited by 159
Self-citationDeep Learning for Accelerated Seismic Reliability Analysis of Transportation Networks
Nabian, M. A., & Meidani, H. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12359 · Cited by 156
Chou, J., & Pham, A. (2015) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12121 · Cited by 128
Dai, H., & Cao, Z. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12257 · Cited by 128
A new prediction model for the load capacity of castellated steel beams
Gandomi, A. H., Tabatabaei, S. M., Moradian, M. H., Radfar, A., & Alavi, A. H. (2011) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2011.01.014 · Cited by 107
Self-constructing wavelet neural network algorithm for nonlinear control of large structures
Wang, N., & Adeli, H. (2015) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2015.01.018 · Cited by 103
Deep Neural Architectures for Mapping Scalp to Intracranial EEG
Antoniades, A., Spyrou, L., Martín-López, D., Valentı́n, A., Alarcón, G., Sanei, S., & Took, C. C. (2018) · International Journal of Neural Systems · doi:10.1142/s0129065718500090 · Cited by 101
Neural Network Model for Preformed-Foam Cellular Concrete
(2001) · ACI Materials Journal · doi:10.14359/10730 · Cited by 85
A new type of neurons for machine learning
Fan, F., Cong, W., & Wang, G. (2017) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2920 · Cited by 81
Neural Network, Machine Learning, and Evolutionary Approaches for Concrete Material Characterization
Rafiei, M. H., Khushefati, W. H., Demirboğa, R., & Adeli, H. (2016) · ACI Materials Journal · doi:10.14359/51689360 · Cited by 78
Kiani, B., Gandomi, A. H., Sajedi, S., & Liang, R. Y. K. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001602 · Cited by 66
Freeway Travel Time Prediction Using Takagi–Sugeno–Kang Fuzzy Neural Network
Zhang, Y., & Ge, H. (2013) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12014 · Cited by 51
An empirical model for shear capacity of RC deep beams using genetic-simulated annealing
Gandomi, A. H., Alavi, A. H., Danial Mohammadzadeh, S., & Sahab, M. G. (2013) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2013.02.007 · Cited by 50
What makes Data Science different? A discussion involving Statistics2.0 and Computational Sciences
Ley, C., & Bordas, S. (2018) · International Journal of Data Science and Analytics · doi:10.1007/s41060-017-0090-x · Cited by 47
Self-citation
Cited by
Pan, Y., & Zhang, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2020.103517 · Cited by 1,336
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Deep learning in the construction industry: A review of present status and future innovations
Akinosho, T. D., Oyedele, L. O., Bilal, M., Ajayi, A. O., Delgado, M. D., Akinade, O. O., & Ahmed, A. A. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101827 · Cited by 537
Efficient machine learning models for prediction of concrete strengths
Nguyen, H., Vu, T., Vo, T. P., & Thai, H.-T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120950 · Cited by 524
Kang, M.-C., Yoo, D.-Y., & Gupta, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121117 · Cited by 411
Metadata
- Authors
- Nguyen, T., Kashani, A., Ngo, T., & Bordas, S.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2018-11-16
- Volume
- 34
- Issue
- 4
- Pages
- 316-332
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W2900511825
- Cited by
- 269
- References
- 44
- FWCI
- 17.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.