The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Finned Metal Foam Heat Sinks for Electronics Cooling in Forced Convection
Abstract
In this paper, we present recent experimental results on forced convective heat transfer in novel finned metal foam heat sinks. Experiments were conducted on aluminum foams of 90 percent porosity and pore size corresponding to 5 PPI (200 PPM) and 20 PPI (800 PPM) with one, two, four and six fins, where PPI (PPM) stands for pores per inch (pores per meter) and is a measure of the pore density of the porous medium. All of these heat sinks were fabricated in-house. The forced convection results show that heat transfer is significantly enhanced when fins are incorporated in metal foam. The heat transfer coefficient increases with increase in the number of fins until adding more fins retards heat transfer due to interference of thermal boundary layers. For the 20 PPI samples, this maximum was reached for four fins. For the 5 PPI heat sinks, the trends were found to be similar to those for the 20 PPI heat sinks. However, due to larger pore sizes, the pressure drop encountered is much lower at a particular air velocity. As a result, for a given pressure drop, the heat transfer coefficient is higher compared to the 20 PPI heat sink. For example, at a Δp of 105 Pa, the heat transfer coefficients were found to be 1169W/m2-K and 995W/m2-K for the 5 PPI and 20 PPI 4-finned heat sinks, respectively. The finned metal foam heat sinks outperform the longitudinal finned and normal metal foam heat sinks by a factor between 1.5 and 2, respectively. Finally, an analytical expression is formulated based on flow through an open channel and incorporating the effects of thermal dispersion and interfacial heat transfer between the solid and fluid phases of the porous medium. The agreement of the proposed relation with the experimental results is promising.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Nield, D. A., & Bejan, A. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3033-3 · Cited by 5,282
Thermophysical properties of high porosity metal foams
Bhattacharya, A., Calmidi, V. V., & Mahajan, R. L. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00220-4 · Cited by 1,233
Self-citationForced Convection in High Porosity Metal Foams
Calmidi, V. V., & Mahajan, R. L. (2000) · Journal of Heat Transfer · doi:10.1115/1.1287793 · Cited by 1,166
Self-citationThermal dispersion in a porous medium
Hsu, C. T., & Cheng, P. (1990) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(90)90015-m · Cited by 686
The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams
Calmidi, V. V., & Mahajan, R. L. (1999) · Journal of Heat Transfer · doi:10.1115/1.2826001 · Cited by 639
Self-citationHeat transfer in open-cell metal foams
Lu, T. J., Stone, H. A., & Ashby, M. F. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00031-7 · Cited by 603
Effects of thermal dispersion on forced convection in fibrous media
Hunt, M. L., & Tien, C. L. (1988) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(88)90013-0 · Cited by 342
Thermal Control of Electronic Equipment and Devices
Peterson, G. P., & Ortega, A. (1990) · Advances in heat transfer · doi:10.1016/s0065-2717(08)70028-5 · Cited by 301
Optimal Thermal Design of Forced Convection Heat Sinks-Analytical
Knight, R. W., Goodling, J. S., & Hall, D. J. (1991) · Journal of Electronic Packaging · doi:10.1115/1.2905412 · Cited by 218
Cited by
A synthesis of fluid and thermal transport models for metal foam heat exchangers
Mahjoob, S., & Vafai, K. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.12.012 · Cited by 350
Qureshi, Z. A., Elnajjar, E., Al-Ketan, O., Al-Rub, R. A., & Al-Omari, S. B. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121001 · Cited by 302
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
Han, X.-H., Wang, Q., Park, Y.-G., T’Joen, C., Sommers, A., & Jacobi, A. (2012) · Heat Transfer Engineering · doi:10.1080/01457632.2012.659613 · Cited by 279
Metadata
- Authors
- Bhattacharya, A., & Mahajan, R. L.
- Venue
- Journal of Electronic Packaging
- Publisher
- ASME International
- Published
- 2002-07-26
- Volume
- 124
- Issue
- 3
- Pages
- 155-163
- ISSN
- 1043-7398 (ISSN-L)
- 1528-9044
- OpenAlex
- W2011120264
- Cited by
- 279
- References
- 13
- FWCI
- 10.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Finned Metal Foam Heat Sinks for Electronics Cooling in Forced Convection. https://app.cochat.ai/papers/10.1115/1.1464877
- The paper
- Bhattacharya, A., & Mahajan, R. L. (2002). Finned Metal Foam Heat Sinks for Electronics Cooling in Forced Convection. Journal of Electronic Packaging. https://doi.org/10.1115/1.1464877
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.