The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Heat Transfer Mechanisms During Flow Boiling in Microchannels
Abstract
The forces due to surface tension and momentum change during evaporation, in conjunction with the forces due to viscous shear and inertia, govern the two-phase flow patterns and the heat transfer characteristics during flow boiling in microchannels. These forces are analyzed in this paper, and two new nondimensional groups, K1 and K2, relevant to flow boiling phenomenon are derived. These groups are able to represent some of the key flow boiling characteristics, including the CHF. In addition, a mechanistic description of the flow boiling phenomenon is presented. The small hydraulic dimensions of microchannel flow passages present a large frictional pressure drop in single-phase and two-phase flows. The small hydraulic diameter also leads to low Reynolds numbers, in the range 100–1000, or even lower for smaller diameter channels. Such low Reynolds numbers are rarely employed during flow boiling in conventional channels. In these low Reynolds number flows, nucleate boiling systematically emerges as the dominant mode of heat transfer. The high degree of wall superheat required to initiate nucleation in microchannels leads to rapid evaporation and flow instabilities, often resulting in flow reversal in multiple parallel channel configuration. Aided by strong evaporation rates, the bubbles nucleating on the wall grow rapidly and fill the entire channel. The contact line between the bubble base and the channel wall surface now becomes the entire perimeter at both ends of the vapor slug. Evaporation occurs at the moving contact line of the expanding vapor slug as well as over the channel wall covered with a thin evaporating film surrounding the vapor core. The usual nucleate boiling heat transfer mechanisms, including liquid film evaporation and transient heat conduction in the liquid adjacent to the contact line region, play an important role. The liquid film under the large vapor slug evaporates completely at downstream locations thus presenting a dryout condition periodically with the passage of each large vapor slug. The experimental data and high speed visual observations confirm some of the key features presented in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New equations for heat and mass transfer in turbulent pipe and channel flow
Gnielinski, V. (1976) · Medical Entomology and Zoology · Cited by 4,037
Kandlikar, S. G. (1990) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2910348 · Cited by 1,191
Self-citationFundamental issues related to flow boiling in minichannels and microchannels
Kandlikar, S. G. (2002) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(02)00150-4 · Cited by 1,006
Self-citationEvolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology
Kandlikar, S. G., & Grande, W. J. (2003) · Heat Transfer Engineering · doi:10.1080/01457630304040 · Cited by 960
Self-citationChart correlation for saturated boiling heat transfer: Equations and further study
Shah, M. M. (1982) · ASHRAE winter conference papers · Cited by 604
Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe
Yan, Y.-Y., & Lin, T. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00127-6 · Cited by 383
Zhang, L., Koo, J.-M., Jiang, L., Asheghi, M., Goodson, K. E., Santiago, J. G., & Kenny, T. W. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982858 · Cited by 250
Predicting Heat Transfer During Flow Boiling in Minichannels and Microchannels
Kandlikar, S. G., & Steinke, M. E. (2003) · Cited by 65
Self-citation
Cited by
Microchemical systems for continuous-flow synthesis
Hartman, R. L., & Jensen, K. F. (2009) · Lab on a Chip · doi:10.1039/b906343a · Cited by 508
Kandlikar, S. G. (2012) · Journal of Heat Transfer · doi:10.1115/1.4005126 · Cited by 389
Self-citationBoiling heat transfer in rectangular microchannels with reentrant cavities
Koşar, A., Kuo, C.-J., & Peles, Y. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.06.003 · Cited by 295
Kandlikar, S. G., & Bapat, A. V. (2007) · Heat Transfer Engineering · doi:10.1080/01457630701421703 · Cited by 291
Self-citationTwo-Phase Flow, Boiling, and Condensation: In Conventional and Miniature Systems
Ghiaasiaan, S. M. (2017) · Cambridge University Press eBooks · doi:10.1017/9781316597392 · Cited by 286
Metadata
- Authors
- Kandlikar, S. G.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 2004-02-01
- Volume
- 126
- Issue
- 1
- Pages
- 8-16
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2068778507
- Cited by
- 459
- References
- 8
- FWCI
- 55.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.