The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Computational and Experimental Investigation of the Human Thermal Plume
Abstract
The behavior of the buoyant plume of air shed by a human being in an indoor environment is important to room ventilation requirements, airborne disease spread, air pollution control, indoor air quality, and the thermal comfort of building occupants. It also becomes a critical factor in special environments like surgery rooms and clean-rooms. Of the previous human thermal plume studies, few have used actual human volunteers, made quantitative plume velocity measurements, or considered thermal stratification of the environment. Here, a study of the human thermal plume in a standard room environment, including moderate thermal stratification, is presented. We characterize the velocity field around a human volunteer in a temperature-stratified room using particle image velocimetry (PIV). These results are then compared to those obtained from a steady three-dimensional computational fluid dynamics (CFD) solution of the Reynolds-averaged Navier-Stokes equations (RANS) using the RNG k‐ε two-equation turbulence model. Although the CFD simulation employs a highly simplified model of the human form, it nonetheless compares quite well with the PIV data in terms of the plume centerline velocity distribution, velocity profiles, and flow rates. The effect of thermal room stratification on the human plume is examined by comparing the stratified results with those of an additional CFD plume simulation in a uniform-temperature room. The resulting centerline velocity distribution and plume flow rates are presented. The reduction in plume buoyancy produced by room temperature stratification has a significant effect on plume behavior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-equation eddy-viscosity turbulence models for engineering applications
Menter, F. R. (1994) · AIAA Journal · doi:10.2514/3.12149 · Cited by 21,593
Cited by
Airborne spread of infectious agents in the indoor environment
Wei, J., & Li, Y. (2016) · American Journal of Infection Control · doi:10.1016/j.ajic.2016.06.003 · Cited by 519
Mittal, R., Ni, R., & Seo, J.-H. (2020) · Journal of Fluid Mechanics · doi:10.1017/jfm.2020.330 · Cited by 494
Zhai, Z. J., Zhang, Z., Zhang, W., & Chen, Q. Y. (2007) · HVAC&R Research · doi:10.1080/10789669.2007.10391459 · Cited by 457
Tang, J. W., Liebner, T. J., Craven, B. A., & Settles, G. S. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0295.focus · Cited by 300
Self-citationAirborne spread of expiratory droplet nuclei between the occupants of indoor environments: A review
Ai, Z. T., & Melikov, A. K. (2018) · Indoor Air · doi:10.1111/ina.12465 · Cited by 278
Metadata
- Authors
- Craven, B. A., & Settles, G. S.
- Venue
- Journal of Fluids Engineering
- Publisher
- ASME International
- Published
- 2006-03-19
- Volume
- 128
- Issue
- 6
- Pages
- 1251-1258
- ISSN
- 0098-2202 (ISSN-L)
- 1528-901X
- OpenAlex
- W1983206919
- Cited by
- 217
- References
- 1
- FWCI
- 2.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.