The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
A Validated Three-Dimensional Computational Model of a Human Knee Joint
Abstract
This paper presents a three-dimensional finite element tibio-femoral joint model of a human knee that was validated using experimental data. The geometry of the joint model was obtained from magnetic resonance (MR) images of a cadaveric knee specimen. The same specimen was biomechanically tested using a robotic/universal force-moment sensor (UFS) system and knee kinematic data under anterior-posterior tibial loads (up to 100 N) were obtained. In the finite element model (FEM), cartilage was modeled as an elastic material, ligaments were represented as nonlinear elastic springs, and menisci were simulated by equivalent-resistance springs. Reference lengths (zero-load lengths) of the ligaments and stiffness of the meniscus springs were estimated using an optimization procedure that involved the minimization of the differences between the kinematics predicted by the model and those obtained experimentally. The joint kinematics and in-situ forces in the ligaments in response to axial tibial moments of up to 10 Nm were calculated using the model and were compared with published experimental data on knee specimens. It was also demonstrated that the equivalent-resistance springs representing the menisci are important for accurate calculation of knee kinematics. Thus, the methodology developed in this study can be a valuable tool for further analysis of knee joint function and could serve as a step toward the development of more advanced computational knee models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Combined knee loading states that generate high anterior cruciate ligament forces
Markolf, K. L., Burchfield, D. M., Shapiro, M. M., Shepard, M. F., Finerman, G. A. M., & Slauterbeck, J. L. (1995) · Journal of Orthopaedic Research · doi:10.1002/jor.1100130618 · Cited by 1,036
Articular contact in a three-dimensional model of the knee
Blankevoort, L., Kuiper, J. H., Huiskes, R., & Grootenboer, H. J. (1991) · Journal of Biomechanics · doi:10.1016/0021-9290(91)90019-j · Cited by 520
Butler, D. L., Kay, M. D., & Stouffer, D. C. (1986) · Journal of Biomechanics · doi:10.1016/0021-9290(86)90019-9 · Cited by 513
The role of joint load in knee stability.
Markolf, K. L., Bargar, W. L., Shoemaker, S. C., & Amstutz, H. C. (1981) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198163040-00007 · Cited by 437
A three-dimensional mathematical model of the knee-joint
Wismans, J., Veldpaus, F., Janssen, J., Huson, A., & Struben, P. (1980) · Journal of Biomechanics · doi:10.1016/0021-9290(80)90354-1 · Cited by 351
A combined robotic/universal force sensor approach to determine in situ forces of knee ligaments
Rudy, T. W., Livesay, G. A., Woo, S. L., & Fu, F. H. (1996) · Journal of Biomechanics · doi:10.1016/0021-9290(96)00056-5 · Cited by 279
Self-citationLigament-Bone Interaction in a Three-Dimensional Model of the Knee
Blankevoort, L., & Huiskes, R. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2894883 · Cited by 267
Validation of a three-dimensional model of the knee
Blankevoort, L., & Huiskes, R. (1996) · Journal of Biomechanics · doi:10.1016/0021-9290(95)00149-2 · Cited by 226
Can muscle co-contraction protect knee ligaments after injury or repair?
O'Connor, J. (1993) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.75b1.8421032 · Cited by 205
Wascher, D. C., Markolf, K. L., Shapiro, M. S., & Finerman, G. A. (1993) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199303000-00009 · Cited by 202
Cited by
Peña, E., Calvo, B., Martínez, M. A., & Doblaré, M. (2006) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2005.04.030 · Cited by 506
A Finite Element Model of the Human Knee Joint for the Study of Tibio-Femoral Contact
Haut Donahue, T. L., Hull, M. L., Rashid, M. M., & Jacobs, C. R. (2002) · Journal of Biomechanical Engineering · doi:10.1115/1.1470171 · Cited by 493
Peña, E., Calvo, B., Martínez, M. A., Palanca, D., & Doblaré, M. (2005) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2005.01.009 · Cited by 285
The anterior cruciate ligament injury controversy: is “valgus collapse” a sex-specific mechanism?
Quatman, C. E., & Hewett, T. E. (2009) · British Journal of Sports Medicine · doi:10.1136/bjsm.2009.059139 · Cited by 260
Li, G., DeFrate, L. E., Sun, H., & Gill, T. J. (2004) · The American Journal of Sports Medicine · doi:10.1177/0363546503262175 · Cited by 182
Self-citation
Metadata
- Authors
- Li, G., Gil, J., Kanamori, A., & Woo, S. L.-Y.
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 1999-12-01
- Volume
- 121
- Issue
- 6
- Pages
- 657-662
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W1983467405
- Cited by
- 264
- References
- 20
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Validated Three-Dimensional Computational Model of a Human Knee Joint. https://app.cochat.ai/papers/10.1115/1.2800871
- The paper
- Li, G., Gil, J., Kanamori, A., & Woo, S. L.-Y. (1999). A Validated Three-Dimensional Computational Model of a Human Knee Joint. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.2800871
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.