CoChat

Two-Phase Transport in PEM Fuel Cell Cathodes

Gurau, Vladimir, Zawodzinski, Thomas A., Mann, J. Adin · 2008 · Journal of Fuel Cell Science and Technology
Cited by 68

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

To date, multiphase computational fluid dynamics models for proton exchange membrane (PEM) fuel cells failed to provide even a qualitative depiction of the fuel cell water management. This was primarily due to the inability to capture two-phase phenomena in the cathode catalyst layer and the water saturation equilibrium at the interface between the fuel cell components. A model without the cathode catalyst layer cannot capture dominant mechanisms of water transfer and cannot explain correctly the fuel cell performance. We propose a multifluid, multiphase model consisting of separate transport equations for each phase. The model accounts for gas- and liquid-phase momentam and species transport in the cathode channel, gas diffusion layer (GDL), and catalyst layer and for the current density, ionomer-phase potential, and water content in the catalyst coated membrane. The model considers water produced at cathode by (I) electrochemical reaction, (II) change of phase, and (III) parallel, competing mechanisms of water transfer between the ionomer distributed in the catalyst layer and the catalyst layer pores. Liquid water is transported in the GDL and the catalyst layer due to liquid pressure gradient and in the channel due to gravity and two-phase drag. We have developed a transport equation for the water content. The source/sink terms of the transport equation represent the parallel, competing mechanisms of water transfer between the ionomer phase and the catalyst layer pores. They are (I) sorption/desorption at nonequilibrium and (II) electro-osmotic drag by the secondary current. Another distinguishing feature of this model is the capability to capture water saturation equilibrium at channel-GDL and GDL–catalyst layer interfaces. The computational results are used to study the dynamics of water transport within and between the fuel cell components and the impact of the GDL and catalyst layer properties on the amount of water retained in the fuel cell components during operation. A new dominant mechanism of water transfer between the ionomer distributed in the catalyst layer and the catalyst layer pores is identified. The amount of water retained in GDL is determined by GDL permeability and its pore size at the interface with the channel. The amount of water retained in the cathode catalyst layer is determined by the saturation equilibrium at the interface with the GDL. Models based on the two-phase mixture model are not applicable to PEM fuel cell electrodes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1115/1.2821597

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 68

Metadata

Authors
Gurau, V., Zawodzinski, T. A., & Mann, J. A.
Venue
Journal of Fuel Cell Science and Technology
Published
2008-04-11
Volume
5
Issue
2
ISSN
  • 1550-624X (ISSN-L)
  • 1551-6989
OpenAlex
W1998030060
Cited by
68
References
4
FWCI
7.77
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.