The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters
Abstract
Cantilevered beams with piezoceramic layers have been frequently used as piezoelectric vibration energy harvesters in the past five years. The literature includes several single degree-of-freedom models, a few approximate distributed parameter models and even some incorrect approaches for predicting the electromechanical behavior of these harvesters. In this paper, we present the exact analytical solution of a cantilevered piezoelectric energy harvester with Euler–Bernoulli beam assumptions. The excitation of the harvester is assumed to be due to its base motion in the form of translation in the transverse direction with small rotation, and it is not restricted to be harmonic in time. The resulting expressions for the coupled mechanical response and the electrical outputs are then reduced for the particular case of harmonic behavior in time and closed-form exact expressions are obtained. Simple expressions for the coupled mechanical response, voltage, current, and power outputs are also presented for excitations around the modal frequencies. Finally, the model proposed is used in a parametric case study for a unimorph harvester, and important characteristics of the coupled distributed parameter system, such as short circuit and open circuit behaviors, are investigated in detail. Modal electromechanical coupling and dependence of the electrical outputs on the locations of the electrodes are also discussed with examples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Schwartz, L. (1966) · UCLA - Biblioteca de Ciencias y Tecnologia Felix Morales Bueno · Cited by 3,513
Vibration problems in engineering
Timoshenko, S. P. (1928) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,449
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
IEEE Standard on Piezoelectricity
(2008) · doi:10.1109/ieeestd.1988.79638 · Cited by 951
Classical Normal Modes in Damped Linear Dynamic Systems
Caughey, T. K., & O’Kelly, M. E. J. (1965) · Journal of Applied Mechanics · doi:10.1115/1.3627262 · Cited by 892
On energy harvesting from ambient vibration
Stephen, N. G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.10.003 · Cited by 879
MEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Cited by
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
Self-citationStanton, S. C., McGehee, C. C., & Mann, B. P. (2010) · Physica D: Nonlinear Phenomena · doi:10.1016/j.physd.2010.01.019 · Cited by 983
A piezomagnetoelastic structure for broadband vibration energy harvesting
Erturk, A., Hoffmann, J., & Inman, D. J. (2009) · Applied Physics Letters · doi:10.1063/1.3159815 · Cited by 970
Self-citationA comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Erturk and Inman also presented an accurate analytical distributed parameter model for a unimorph piezoelectric cantilever harvester [145], which has become widely accepted by the energy harvesting community.”
BackgroundOn the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion
Daqaq, M. F., Masana, R., Erturk, A., & Dane Quinn, D. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026278 · Cited by 823
Self-citationSelf‐Powered Nanosensors and Nanosystems
Wang, Z. L. (2012) · Advanced Materials · doi:10.1002/adma.201102958 · Cited by 704
Piezoelectric Energy Harvesting Solutions: A Review
Covaci, C., & Gontean, A. (2020) · Sensors · doi:10.3390/s20123512 · Cited by 691
On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters
Erturk, A., & Inman, D. J. (2008) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x07085639 · Cited by 653
Self-citationIssues in mathematical modeling of piezoelectric energy harvesters
Erturk, A., & Inman, D. J. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/6/065016 · Cited by 480
Self-citationErturk, A., Renno, J. M., & Inman, D. J. (2009) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x08098096 · Cited by 432
Self-citationPiezoelectric buckled beams for random vibration energy harvesting
Cottone, F., Gammaitoni, L., Vocca, H., Ferrari, M., & Ferrari, V (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/3/035021 · Cited by 367
On the optimal energy harvesting from a vibration source
Renno, J. M., Daqaq, M. F., & Inman, D. J. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.07.029 · Cited by 352
Self-citationPiezoelectric energy harvesting from broadband random vibrations
Adhikari, S., Friswell, M. I., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/11/115005 · Cited by 352
Self-citationResistive Impedance Matching Circuit for Piezoelectric Energy Harvesting
Kong, N., Ha, D. S., Erturk, A., & Inman, D. J. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x09357971 · Cited by 344
Self-citationThe performance of a self-excited fluidic energy harvester
Akaydin, H. D., Elvin, N., & Andreopoulos, Y. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/2/025007 · Cited by 305
Relative performance of a vibratory energy harvester in mono- and bi-stable potentials
Masana, R., & Daqaq, M. F. (2011) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2011.07.031 · Cited by 304
A critical review of roadway energy harvesting technologies
Gholikhani, M., Roshani, H., Dessouky, S., & Papagiannakis, A. T. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114388 · Cited by 259
Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials
Akaydın, H. D., Elvin, N., & Andreopoulos, Y. (2010) · Experiments in Fluids · doi:10.1007/s00348-010-0871-7 · Cited by 257
Metadata
- Authors
- Erturk, A., & Inman, D. J.
- Venue
- Journal of Vibration and Acoustics
- Publisher
- ASME International
- Published
- 2008-06-11
- Volume
- 130
- Issue
- 4
- ISSN
- 0739-3717 (ISSN-L)
- 1048-9002
- 1528-8927
- OpenAlex
- W1974439116
- Cited by
- 1,249
- References
- 18
- FWCI
- 76.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.