Torque of Tapered Roller Bearings
The DOI matches its Crossref record.
Abstract
An analytic tapered roller bearing torque model is presented along with laboratory test data. Initial results of this proposed model are favorable. An accurate general purpose torque prediction tool could be obtained by extending the concepts presented in conjunction with a more comprehensive analysis of actual bearing operating conditions. By using EHL (Elastohydrodynamic Lubrication) theory and micro-macro contact analysis, the bearing torque can be determined by predicting each torque component for each roller due to raceway rolling, raceway moments due to EHL pressure distribution, and frictional force of rib-roller end contact. The roughness effect of contact surfaces, effect of EHL film thickness parameter (the ratio of film thickness to composite surface roughness), and thermal EHL effects are also included. A bearing torque test rig, which can measure the torque of cup race, cone race, and rib separately, was built and used to provide test data. Good agreement between the experimentally measured bearing torques and the predictions of the new torque model has been obtained. This torque model will provide a greater fundamental understanding and is more versatile over a wide range of operating conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The dimensionless parameters 𝑈 , 𝑊 , and 𝐺 (see Eq. (3)) have been shown time and time again to provide excellent predictive power for the EHL behavior of the contact [43-46][11,47].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [45]
Citations
Cites
Still being checked.
Cited by
Items 101–140 of 140
Syla, S., Brill, K. M., Paulus, S., Graf, S., & Koch, O. (2026) · Lubricants · doi:10.3390/lubricants14040154 · Cited by 2
Friction Issues over the Railway Wheels-Axis Assembly Motion
Derbiszewski, B., Obraniak, A., Woźniak, M., Rylski, A., Siczek, K. J., & Kubiak, P. (2022) · Lubricants · doi:10.3390/lubricants10020026 · Cited by 2
Pinardon, V., Gentieu, T., Morterolle, S., & Nélias, D. (2024) · Tribology International · doi:10.1016/j.triboint.2024.110129 · Cited by 2
Heider, K. (2019) · VDI Verlag eBooks · doi:10.51202/9783186450012 · Cited by 2
Effect of bearing types on performance of bearings for gear units of railway vehicles
TAKAHASHI, K., SUZUKI, D., & Nagatomo, T. (2022) · Transactions of the JSME (in Japanese) · doi:10.1299/transjsme.22-00126 · Cited by 2
A dynamic model considering the time-varying friction moment of a flexible rotor system
Liu, J., An, Y., Fancheng, W., Tang, C., & Xu, L. (2023) · Engineering Computations · doi:10.1108/ec-12-2021-0707 · Cited by 2
Liu, J., & Li, X. (2025) · Mechanics Based Design of Structures and Machines · doi:10.1080/15397734.2025.2500661 · Cited by 2
Kinematics and tribological problems of linear guidance systems in four contact points
Popescu, A., & Olaru, D. N. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/147/1/012029 · Cited by 2
Tapered roller bearings for automotive driveline and transmission applications
Gradu, M., Joki, M., & Hill, H. E. (2004) · ATZ - Automobiltechnische Zeitschrift · doi:10.1007/bf03224655 · Cited by 2
Scuffing approach for an angular contact ball bearings
Olaru, D. N., Bujoreanu, C., Creţu, S., Popinceanu, N. G., & Nélias, D. (2000) · HAL · Cited by 2
Li, T., Yang, Y.-H., Zhang, Y., & Zhao, C.-Y. (2022) · Journal of Tribology · doi:10.1115/1.4054712 · Cited by 1
Meinel, A., & Tremmel, S. (2018) · ERef Bayreuth (University of Bayreuth) · Cited by 1
Effects of contact surface shapes on isothermal rolling traction of skewed disks
Ohta, H., Wada, Y., & Takano, Y. (2025) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501251324691 · Cited by 1
Petrzik, T., Brill, K. M., Jacobs, G., Koch, O., Lehmann, B., Rößler, P., & Niazmehr, A. (2025) · Lubricants · doi:10.3390/lubricants14010016 · Cited by 1
Zhou, P., Ling, J., & Zhao, R. (2026) · Tribology International · doi:10.1016/j.triboint.2026.111762 · Cited by 1
Egawa, K., & Sakaguchi, T. (2026) · Journal of Tribology · doi:10.1115/1.4072104 · Cited by 1
Egawa, K., & Sakaguchi, T. (2026) · Journal of Tribology · doi:10.1115/1.4072105 · Cited by 1
Dynamic Analysis for Investigation of Fluid Resistance for Ball Bearings
Nishiyama, K., & Inoue, A. (2012) · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C · doi:10.1299/kikaic.78.1663 · Cited by 1
A Study of Prevention of Fretting of Ball Bearing Using the Revolution of Rolling Elements
NOGUCHI, S., MATSUO, K., Yoshikawa, S., & Nogi, T. (2011) · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C · doi:10.1299/kikaic.77.2894 · Cited by 1
Maruyama, T. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824096-0.00007-x · Cited by 1
Etude du comportement thermomécanique des roulements à billes faiblement chargés
Darul, L. (2024) · theses.fr (ABES) · doi:10.70675/113f9f1bz3079z4ed7zb977z43f3698eba7e · Cited by 1
Étude des sources de pertes et des transferts thermiques au sein de paliers à éléments roulants
de Veauce, F. D. C. (2024) · theses.fr (ABES) · doi:10.70675/88dde877ze04dz42dfz9c97ze2276cfab474 · Cited by 1
Mechanics Analysis and Finite Element Solution on Tapper Assembly of Automobile’s Drive Axle
Li, Y. Y., Wang, M., & Guo, Y. C. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.614.19
Kegelrollenlager für Anwendungen in Antriebsstrang und Getriebe
Gradu, M., Joki, M., & Hill, H. E. (2004) · ATZ - Automobiltechnische Zeitschrift · doi:10.1007/bf03221615
Design of the exhaust device for light vehicle engine pedestal experiment
Sun, S. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2266000
Measurement of torque on tapered roller bearings
Blake, J., & Truman, C. E. (2001) · Bristol Research (University of Bristol)
Influence of Operating Parameters and Rib Convexity on Friction Torque of Taper Roller Bearings
Khant, A. B., & Dadhaniya, J. K. (2024) · International Journal of Mechanical Engineering · doi:10.14445/23488360/ijme-v11i11p104
Analytical efficiency calculation for grease lubricated worm gears
Müller, F., & Koch, O. (2025) · Forschung im Ingenieurwesen · doi:10.1007/s10010-025-00866-3
Modeling and parametric analysis of double-row tapered roller bearings considering the roller skew
Xiao, Q., Wang, Z., Zhao, L., Chen, R., & Guo, R. (2025) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501251384461
Numerische Verschleißmodellierung von trocken-, misch- und grenzreibungsbehafteten Wälzkontakten
Winkler, A., & FAU University Press ein Imprint der Universität Erlangen-Nürnberg (2025) · Directory of Open access Books (OAPEN Foundation) · doi:10.25593/978-3-96147-817-0
Simulation-based comparison of friction models in steel-aluminium foam spur gears
Bähr, M. A., Grutza, O., Koch, O., & Oehler, M. (2025) · Production Engineering · doi:10.1007/s11740-025-01404-4
Ohta, H., & Takano, Y. (2026) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501251411002
Zhao, Z., Wu, Y., Zhang, P., Zhang, G., Feng, Y., Li, X., & Zhao, Y. (2026) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-025-06178-5
Wu, Z., Kang, J., Zheng, Y., & Deng, S. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6459464
Manteufel, J., Puchtler, S., & Kirchner, E. (2026) · Lubricants · doi:10.3390/lubricants14040161
Lubrication of Cylindrical and Tapered Roller Bearings
Marian, M., Bayer, G., Kelley, J., & Schneider, V. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-30138-4.00075-3
鉄道車両の駆動用モータに使用される転がり軸受の保持器摩耗に関する研究
鈴木, 大. (2023) · Institutional Repositories DataBase (IRDB) · doi:10.20602/0002000019
Moon, D.-J., Kim, B.-S., Kim, J.-H., Lee, M., & Park, Y.-J. (2026) · Scientific Reports · doi:10.1038/s41598-026-77354-3
Coupled Computational Prediction of Efficiency, Thermal State and Wear Evolution in Worm Gear Drives
Karabacak, Y. E. (2026) · Journal of Tribology · doi:10.1002/jtrb.70005
Metadata
- Authors
- Zhou, R. S., & Hoeprich, M. R.
- Affiliations
- Timken (United States) (US)
- Venue
- Journal of Tribology
- Publisher
- Wiley
- Published
- 1991-07-01
- Volume
- 113
- Issue
- 3
- Pages
- 590-597
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2058329285
- Cited by
- 127
- References
- 0
- Citations by year
- 2026: 12 · 2025: 10 · 2024: 13 · 2023: 17 · 2022: 8 · 2021: 7 · 2020: 4 · 2019: 4 · 2018: 8 · 2017: 5 · 2016: 3 · 2015: 4 · 2014: 1 · 2012: 2
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Tribology (publishedVersion)
- Funders
- Purdue University
- Northwestern University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- tapered roller bearings, bearing torque, elastohydrodynamic lubrication, film thickness, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.