The DOI matches its Crossref record.
Thermal Performance of a Heat Storage Module Using PCM’s With Different Melting Temperatures: Mathematical Modeling
Abstract
In the present study, the performance of a heat storage unit consisting of number of vertical cylindrical capsules filled with phase change materials, with air flowing across them for heat exchange has been analyzed. Earlier theoretical models did not consider temperature distribution in the radial direction within the capsules, an assumption that limits their applications for small diameter capsules. The mathematical model developed in this work is based on solving the heat conduction equation in both melt and solid phases in cylindrical coordinates, taking into account the radial temperature distribution in both phases. Heat flux was then evaluated at the surface of the first row of the capsules to determine the temperature of the air leaving that row by a simple heat balance. It was found that such computation may be carried out for every few rows rather than for a single row to minimize computer time. The simulation study showed a significant improvement in the rate of heat transfer during heat charge and discharge when phase change materials with different melting temperatures were used. Air must flow in the direction of decreasing melting temperature during heat charge, while it must be reversed during heat discharge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Self-citationSolar energy storage using phase change materials☆
KENISARIN, M., & MAHKAMOV, K. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.005 · Cited by 1,376
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
A review on phase-change materials: Mathematical modeling and simulations
Dutil, Y., Rousse, D. R., Salah, N. B., Lassue, S., & Zalewski, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.011 · Cited by 676
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Cárdenas, B., & León, N. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.028 · Cited by 496
Thermophysical properties of some organic phase change materials for latent heat storage. A review
Kenisarin, M. M. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.001 · Cited by 385
Mahdi, J. M., Mohammed, H. I., Hashim, E. T., Talebizadehsardari, P., & Nsofor, E. C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113993 · Cited by 323
Kalapala, L., & Devanuri, J. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.10.024 · Cited by 269
Adine, H. A., & El Qarnia, H. (2009) · Applied Mathematical Modelling · doi:10.1016/j.apm.2008.05.016 · Cited by 260
Assessment of latent heat thermal storage systems operating with multiple phase change materials
N., L. N. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.04.008 · Cited by 113
Xu, H. J., & Zhao, C. Y. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.10.054 · Cited by 93
Xu, H. J., & Zhao, C. Y. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.07.135 · Cited by 64
Investigation of cascaded shell and tube latent heat storage systems for solar tower power plants
Liu, M., Tay, N. H. S., Belusko, M., & Bruno, F. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.175 · Cited by 42
Metadata
- Authors
- Farid, M. M., & Kanzawa, A.
- Venue
- Journal of Solar Energy Engineering
- Publisher
- ASME International
- Published
- 1989-05-01
- Volume
- 111
- Issue
- 2
- Pages
- 152-157
- ISSN
- 0199-6231 (ISSN-L)
- 1528-8986
- OpenAlex
- W2092812805
- Cited by
- 242
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.