The DOI matches its Crossref record.
The Effect of Viscous Shear Heating on Both Film Thickness and Rolling Traction in an EHL Line Contact—Part I: Fully Flooded Conditions
Abstract
A theoretical analysis of both fully flooded rolling traction and film thickness in an EHL line contact is described and modified formulas for fully flooded isothermal conditions are presented. These are compared with the Grubin, Dowson, and Higginson film thickness formulas, and the rolling traction theory by Archard and Baglin (1975). The effect of viscous shear heating in the inlet region has been investigated and new equations for both fully flooded film thickness and rolling traction, including this thermal effect, are introduced. These equations predict significant reductions in both film thickness and rolling traction, relative to the isothermal case, as speed is increased. Viscous shear heating effect is found to be negligible only at very low rolling speeds. The results of the theoretical analysis compare well with experimental data presented by Dyson, Naylor, and Wilson (1966) and Adams and Hirst (1973).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Thus, simply using this empirical rolling traction formula (10) might significantly underestimate the rolling power loss.”
From A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication (2011) · cites this paper as [10]
In the citing paper
“It is apparent that r Q exists across the entire hydrodynamically lubricated contact zone, and is not subject to any cancellation, highlighting the unsuitability of the rolling traction formula (10) in estimating the rolling loss.”
From A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication (2011) · cites this paper as [10]
Citations
Cites
Still being checked.
Cited by
Li, S., & Kahraman, A. (2010) · Tribology Transactions · doi:10.1080/10402000903502279 · Cited by 149
Rolling-element bearing modeling: A review
Hong, S.-W., & Tong, V.-C. (2016) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-016-0200-z · Cited by 124
Prediction of mechanical gear mesh efficiency of hypoid gear pairs
Kolivand, M., Li, S., & Kahraman, A. (2010) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2010.06.015 · Cited by 117
Liu, P., Lü, J., Yu, H., Ren, N., Lockwood, F. E., & Wang, Q. J. (2017) · The Journal of Chemical Physics · doi:10.1063/1.4986552 · Cited by 106
A nonlinear dynamic vibration model of cylindrical roller bearing considering skidding
Tu, W., Yu, W., Shao, Y., & Yu, Y. (2021) · Nonlinear Dynamics · doi:10.1007/s11071-021-06238-0 · Cited by 96
A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Wu, S., & Cheng, H. S. (1991) · Tribology Transactions · doi:10.1080/10402009108982050 · Cited by 83
Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method
Maruyama, T., Maeda, M., & Nakano, K. (2019) · Tribology online · doi:10.2474/trol.14.327 · Cited by 64
Thermal Elastohydrodynamic Lubrication of Line Contacts
Ghosh, M. K., & Hamrock, B. J. (1985) · A S L E Transactions · doi:10.1080/05698198508981608 · Cited by 58
Ding, H., Li, H., Chen, S., Shi, Y., Wang, Y., Rong, K., & Lu, R. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107569 · Cited by 49
On the effect of starved lubrication on elastohydrodynamic (EHL) line contacts
Ebner, M., Yilmaz, M., Lohner, T., Michaelis, K., Höhn, B., & Stahl, K. (2017) · Tribology International · doi:10.1016/j.triboint.2017.06.004 · Cited by 49
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 1: Line contacts
Biboulet, N., & Houpert, L. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet790 · Cited by 45
A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication
LI, S., & KAHRAMAN, A. (2011) · Journal of Advanced Mechanical Design, Systems, and Manufacturing · doi:10.1299/jamdsm.5.252 · Cited by 45
SHODA, Y., Ijuin, S., Aramaki, H., Yui, H., & Toma, K. (1997) · Tribology Transactions · doi:10.1080/10402009708983708 · Cited by 45
Stammler, M., Schwack, F., Bader, N., Reuter, A., & Poll, G. (2018) · Wind energy science · doi:10.5194/wes-3-97-2018 · Cited by 39
Tormos, B., Martín, J., Carreño, R., & Ramírez, L. (2018) · Tribology International · doi:10.1016/j.triboint.2018.03.007 · Cited by 35
Ghosh, M. K., & Pandey, R. K. (1998) · Journal of Tribology · doi:10.1115/1.2834174 · Cited by 31
Predicting Friction of Tapered Roller Bearings with Detailed Multi-Body Simulation Models
Wingertszahn, P., Koch, O., Maccioni, L., Concli, F., & Sauer, B. (2023) · Lubricants · doi:10.3390/lubricants11090369 · Cited by 31
An overview of dynamic modeling of rolling-element bearings
Kumbhar, S. G., Sudhagar, P. E., & Desavale, R. G. (2020) · Noise & Vibration Worldwide · doi:10.1177/0957456520948279 · Cited by 29
Nogi, T. (2015) · Journal of Tribology · doi:10.1115/1.4030203 · Cited by 29
Effect of flash temperature on engine valve train friction
Umar, M., Mufti, R. A., & Khurram, M. (2017) · Tribology International · doi:10.1016/j.triboint.2017.09.030 · Cited by 28
Olaru, D. N., & Gafitanu, M. D. (1993) · Wear · doi:10.1016/0043-1648(93)90243-f · Cited by 28
Talbot, D. C., Li, S., & Kahraman, A. (2013) · Journal of Mechanical Design · doi:10.1115/1.4025350 · Cited by 25
Lubrication and Slippage in Roller Finger Follower Systems in Engine Valve Trains
Chiu, Y. P. (1992) · Tribology Transactions · doi:10.1080/10402009208982116 · Cited by 25
Nutakor, C., Montonen, J., Nerg, J. K., Heikkinen, J., Sopanen, J., & Pyrhonen, J. J. (2018) · Tribology International · doi:10.1016/j.triboint.2018.03.026 · Cited by 24
Friction and lubrication in diesel engine system design
Xin, Q. (2011) · Elsevier eBooks · doi:10.1533/9780857090836.3.651 · Cited by 22
Analysis of Cam/Roller Follower Friction and Slippage in Valve Train Systems
Lee, J., & Patterson, D. J. (1995) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/951039 · Cited by 21
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
Naeini, V. F., Björling, M., Larsson, J. A., & Larsson, R. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122990 · Cited by 18
Hou, Y., Wang, X., Yang, D., & Xiao, Z. (2023) · Friction · doi:10.1007/s40544-022-0678-6 · Cited by 17
Pandey, R. K., & Ghosh, M. K. (1996) · Wear · doi:10.1016/0043-1648(95)06778-7 · Cited by 17
Experimental and theoretical evaluation of friction in roller follower valve train
Islam, T. U., Khurram, M., Umar, M., Mufti, R. A., & Akhtar, K. (2020) · Measurement · doi:10.1016/j.measurement.2020.107808 · Cited by 14
An experimental simulation of the tribology of large spherical roller bearings in paper machines
Fysh, S. D., Oravec, E. M., & Medley, J. B. (1990) · Tribology International · doi:10.1016/0301-679x(90)90005-a · Cited by 13
Starvation in Ball Bearing Lubricated by Oil and Air Lubrication System
ITOIGAWA, F., Nakamura, T., & Matsubara, T. (1998) · Tribology series · doi:10.1016/s0167-8922(98)80079-5 · Cited by 12
Thermal effect in hydrodynamic lubrication of line contacts—Piezoviscous effect neglected
Ghosh, M. K., & Gupta, K. (1998) · International Journal of Mechanical Sciences · doi:10.1016/s0020-7403(97)00082-9 · Cited by 12
Abril, S. O., Rojas, J. P., & Solano, É. N. F. (2020) · Lubricants · doi:10.3390/lubricants8120103 · Cited by 11
Effects of Defect on Roller-Raceway Contact State and Friction Torque of Tapered Roller Bearings
Liu, Y., Kang, W., Zhu, Y., Yan, K. L., & Hong, J. (2020) · Journal of Tribology · doi:10.1115/1.4047194 · Cited by 10
Anandan, N., Pandey, R. K., Jagga, C. R., & Ghosh, M. K. (2006) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet178 · Cited by 10
Experimental Analysis of Rolling Torque and Thermal Inlet Shear Heating in Tapered Roller Bearings
Manjunath, M., Fauconnier, D., Ost, W., & Baets, P. D. (2023) · Machines · doi:10.3390/machines11080801 · Cited by 9
Kolivand, M. (2009) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 13
Liu, Z., Yin, J., & Zhao, F. (2022) · Journal of Tribology · doi:10.1115/1.4056225 · Cited by 8
The Analysis of Frictional Torque for Tapered Roller Bearings Using EHD Theory
Matsuyama, H., Kamamoto, S., & Asano, K. (1998) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/982029 · Cited by 8
An efficient numerical analysis of starved thermohydrodynamically lubricated rolling line contacts
Anandan, N., Pandey, R. K., & Jagga, C. R. (2007) · Tribology International · doi:10.1016/j.triboint.2007.10.001 · Cited by 7
Research on the Output Characteristic of a New Water Hydraulic Electrohydraulic Motor
Xing, T., Huang, Y., Gao, C., & Ruan, J. (2023) · IEEE Access · doi:10.1109/access.2023.3276879 · Cited by 6
Traction in EHL-Contacts : the influence of local fluid rheology and temperatures
Bader, N. F. (2018) · Hannover : Institutionelles Repositorium der Leibniz Universität Hannover · doi:10.15488/4459 · Cited by 6
Theoretical Calculation and Simulation Analysis of No-load Torque of Main Reducer
Xu, J., & Sheng, G. (2017) · International Conference on Applied Mathematics, Modeling and Simulation (AMMS) · doi:10.2991/amms-17.2017.68 · Cited by 5
A new methodology to estimate starvation in ball bearings
Olaru, D. N., & Gafitanu, M. D. (1997) · Tribotest · doi:10.1002/tt.3020040106 · Cited by 5
Aramaki, H., Nakano, Y., & SHODA, Y. (1997) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/970586 · Cited by 3
Ohta, H., & Matsuyama, D. (2024) · Journal of Tribology · doi:10.1115/1.4064394 · Cited by 3
MODELISATION THERMO MECANIQUE D'UN ROULEMENT A BILLES GRANDE VITESSE
Pouly, F. (2010) · Cited by 3
Syla, S., Brill, K. M., Paulus, S., Graf, S., & Koch, O. (2026) · Lubricants · doi:10.3390/lubricants14040154 · Cited by 2
Effects of contact surface shapes on isothermal rolling traction of skewed disks
Ohta, H., Wada, Y., & Takano, Y. (2025) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501251324691 · Cited by 1
Zhang, X., Zhen, D., Feng, G., Liang, X., Zhang, H., & Gu, F. (2026) · Tribology International · doi:10.1016/j.triboint.2026.112013 · Cited by 1
Maruyama, T. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824096-0.00007-x · Cited by 1
A Model to Explain Ehl in a Non-Flooded or Starved Rolling Element Bearing
Kannel, J. W. (1997) · Tribology series · doi:10.1016/s0167-8922(08)70468-1
Islam, T. U., Khurram, M., Raza, A., Rizwan, I. A., Hadia, M., & Habib, B. (2024) · International Bhurban Conference on Applied Sciences and Technology (IBCAST) · doi:10.1109/ibcast61650.2024.10877093
Lubrification des contacts sous-alimentés : apport de la micro-texturation de surface
Brémond, F. (2012) · theses.fr (ABES) · doi:10.70675/b81f37bfz3c77z4574zbdcez1189c4e2152b
Wang, W., & Tang, T. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-30138-4.00045-5
Egawa, K., & Sakaguchi, T. (2026) · Journal of Tribology · doi:10.1115/1.4072104 · Cited by 1
Tribologie als Kernkompetenz für nachhaltige Antriebstechnik
Koch, O., & Syla, S. (2026) · Springer eBooks · doi:10.1007/978-3-658-52117-2_14
Metadata
- Authors
- Goksem, P. G., & Hargreaves, R. A.
- Affiliations
- Sunderland Polytechnic, England
- Venue
- Journal of Lubrication Technology
- Publisher
- Wiley
- Published
- 1978-07-01
- Volume
- 100
- Issue
- 3
- Pages
- 346-352
- ISSN
- 0022-2305 (ISSN-L)
- OpenAlex
- W1975841869
- Cited by
- 58
- References
- 0
- Citations by year
- 2026: 5 · 2025: 1 · 2024: 4 · 2023: 6 · 2022: 2 · 2021: 1 · 2020: 4 · 2019: 1 · 2018: 3 · 2017: 4 · 2016: 1 · 2015: 1 · 2013: 1
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Lubrication Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- elastohydrodynamic lubrication, line contact, film thickness, thermal effects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.