Characterization of MgSO4 Hydrate for Thermochemical Seasonal Heat Storage
Open accessThe DOI matches its Crossref record; 9 of the 10 references it cites were found in a registry or an index; none of the 10 sources its claims cite is checked for support yet.
Abstract
Water vapor sorption in salt hydrates is one of the most promising means for compact, low loss, and long-term storage of solar heat in the built environment. One of the most interesting salt hydrates for compact seasonal heat storage is magnesium sulfate heptahydrate (MgSO4⋅7H2O). This paper describes the characterization of MgSO4⋅7H2O to examine its suitability for application in a seasonal heat storage system for the built environment. Both charging (dehydration) and discharging (hydration) behaviors of the material were studied using thermogravimetric differential scanning calorimetry, X-ray diffraction, particle distribution measurements, and scanning electron microscope. The experimental results show that MgSO4⋅7H2O can be dehydrated at temperatures below 150°C, which can be reached by a medium temperature (vacuum tube) collector. Additionally, the material was able to store 2.2 GJ/m3, almost nine times more energy than can be stored in water as sensible heat. On the other hand, the experimental results indicate that the release of the stored heat is more difficult. The amount of water taken up and the energy released by the material turned out to be strongly dependent on the water vapor pressure, temperature, and the total system pressure. The results of this study indicate that the application of MgSO4⋅7H2O at atmospheric pressure is problematic for a heat storage system where heat is released above 40°C using a water vapor pressure of 1.3 kPa. However, first experiments performed in a closed system at low pressure indicate that a small amount of heat can be released at 50°C and a water vapor pressure of 1.3 kPa. If a heat storage system has to operate at atmospheric pressure, then the application of MgSO4⋅7H2O for seasonal heat storage is possible for space heating operating at 25°C and a water vapor pressure of 2.1 kPa.
Overview
CoChat Summary
TL;DR
MgSO₄·7H₂O is characterized for seasonal thermochemical heat storage; it dehydrates below 150°C and its second dehydration step stores 2.2 GJ/m³, almost nine times water sensible heat. However, heat release is strongly limited by water vapor pressure and temperature, and atmospheric-pressure hydration is problematic for practical conditions above 40°C, though a low-pressure fixed-bed test showed a 4°C temperature lift.
Key findings
- Dehydration proceeds in at least three steps: first at 25–55°C with 6.9±0.2% mass loss (one H₂O); second at 60–265°C with 42.2±0.3% mass loss (5.9 H₂O) and an energy density of 2.2±0.1 GJ/m³, almost nine times water sensible heat (0.25 GJ/m³, 25–85°C); third near 275°C with 0.5±0.1% mass loss (0.1 H₂O). The second step is most interesting because it occurs below 150°C and avoids melting problems.
- Hydration at 25°C and 1 atm depends strongly on water vapor pressure: increasing P_H₂O from 1.3 kPa to 2.1 kPa raises uptake from one to six water molecules per MgSO₄. The single-step MgSO₄→MgSO₄·6H₂O hydration has an energy density of 1.8±0.1 GJ/m³, about 88% of the corresponding dehydration energy density (2.1±0.1 GJ/m³); at 1.3 kPa only 15% of stored energy is released (44.7 kJ/mol instead of 303 kJ/mol).
- At 50°C and P_H₂O=2.1 kPa, MgSO₄ is unable to take up water; under practical conditions (P_H₂O=1.3 kPa and T>40°C), the material cannot take up water at atmospheric pressure. A closed fixed-bed reactor at low pressure (evacuated to 2.8 mbar, reactor at 50°C, evaporator at 10°C, P_H₂O sat=1.3 kPa) showed a maximum temperature increase of 4°C, indicating a small amount of heat can be released.
- Melting occurs at 52.5°C, in good agreement with 50°C from Emons et al., and can reduce bed porosity and vapor transport; it was avoided with heating rates ≤1°C/min, particles <200 µm, and/or sample sizes ≤5 mg, which the paper notes will be difficult to meet in a large heat storage system. Particle size distribution had limited effect on hydration for the studied ranges, but layer thickness strongly affected hydration rate, indicating vapor transport through the layer is limiting.
Methods
- Reagent-grade MgSO₄·7H₂O (99.5% pure) was sieved into 20–38, 38–106, 106–200, and 200–500 µm fractions; unless stated otherwise, 38–106 µm particles were used. Thermal analysis used TG-DSC at ECN and Netzsch with Netzsch STA 409 PC Luxx and DSC 204 F1 Phoenix apparatus, nitrogen-water vapor flows, sample masses of 5–50 mg (standard 10 mg), and atmospheric pressure; hydration/dehydration were studied at 25°C and 50°C with P_H₂O of 1.3, 2.1, and 2.3 kPa.
- X-ray diffraction used a Bruker D8 Advance with MRI oven, Cu Kα1+α2=1.5418 Å, 2θ from 10° to 40°, 0.05° steps, 2 s per step; 150 mg samples were dehydrated from 25°C to 300°C at 1°C/min and hydrated at 25°C. SEM used a JEOL JSM 6330F with platinum-coated samples at 5–15 kV and 50–1500× magnification; particle size distribution used a Malvern Master 2000 laser diffraction instrument with MgSO₄-ethanol suspension and ultrasound.
- A fixed-bed reactor test used a 98 ml storage volume, 25 g MgSO₄·7H₂O dehydrated at 150°C, connected to an evaporator at 10°C and a vacuum pump system; the system was evacuated to 2.8 mbar, the reactor was held at 50°C, and thermocouples monitored temperature during hydration.
Limitations
- The paper states that the local water vapor pressure near the sample at ECN was not determined; possible incomplete gas mixing led the authors to assume 2.3 kPa instead of 1.3 kPa, and more experiments are required to verify this. It also states that the second dehydration step could not be clearly resolved into individual steps, the MgSO₄·2H₂O intermediate was not confirmed by XRD, and more research is needed to understand particle size behavior and the low-pressure process and actual energy released.
- The paper states that atmospheric-pressure application is problematic for heat release above 40°C at P_H₂O=1.3 kPa, and at 50°C and 2.1 kPa no water uptake occurred. The low-pressure fixed-bed result is described as an initial test with only a 4°C temperature lift, and the actual amount of energy released was not determined.
- Evident from the text: thermal analysis used small samples (5–50 mg, standard 10 mg) and the fixed-bed test used 25 g, so scale-up to a large storage system is not demonstrated; the melting-avoidance criteria (≤1°C/min, <200 µm, ≤5 mg) are noted as difficult to meet in large quantities. The ECN versus Netzsch discrepancy also indicates measurement/atmosphere uncertainty.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 0 Not valid · 12 Not checked · 84 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the reaction primarily occurs in a temperature range that can be covered by medium temperature collectors ͑Յ150° C͒”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The effect of increasing the temperature from 25° C ͑curve 2 in Fig. 4͒ to 50° C at constant water vapor pressure of 2.1 kPa is evident: MgSO 4 is unable to take up water at 50° C.”
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, first experiments performed in a closed system at low pressure indicate that a small amount of heat can be released at 50° C and a water vapor pressure of 1.3 kPa.”
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The results show that the dehydration of MgSO 4 •7H 2 O proceeds in at least three steps”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Hydration experiments performed at atmospheric pressure reveal that the amount of water taken up by MgSO 4 depends on partial water vapor pressure and the temperature.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
57 more claims
Create a free account to see all 96 claims and to verify the 7 references still open.
- It may state two separate claims as one. 28
- Probably not a substantial claim. 8
Citations
Cites
Ullmann's Encyclopedia of Industrial Chemistry
(2012) · Choice Reviews Online · doi:10.5860/choice.50-1224 · Cited by 3,049
A Fundamental Equation of State for Heavy Water
Hill, P. G., MacMillan, R. D. C., & Lee, V. (1982) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555661 · Cited by 1,503
(1982) · Medical Entomology and Zoology · Cited by 1,294
Introduction to Thermal Analysis
Brown, M. E. (1988) · Springer eBooks · doi:10.1007/978-94-009-1219-9 · Cited by 685
Experimental stability of magnesium sulfate hydrates that may be present on Mars
Chipera, S. J., & Vaniman, D. T. (2007) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2006.07.044 · Cited by 175
Ruiz-Agudo, E., Martín-Ramos, J. D., & Rodriguez-Navarro, C. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp064460b · Cited by 59
Emons, H. H., Ziegenbalg, G., Naumann, R., & Paulik, F. (1990) · Journal of Thermal Analysis · doi:10.1007/bf01914050 · Cited by 37
First studies in reactor concepts for Thermochemical Storage
Schuitema, R., van Helden, W. G. J., Zondag, H. A., Krosse, L., van Essen, V. M., Bleijendaal, L. P. J., & Kalbasenka, A. N. (2009) · TNO Repository · Cited by 37
Self-citationCompacte chemische seizoenopslag van zonnewarmte Eindrapportage
. (2004) · TNO Repository
Cited by
Items 201–278 of 278
Gladen, A. C., & Bajwa, D. S. (2022) · Journal of Solar Energy Engineering · doi:10.1115/1.4053904 · Cited by 5
Magnesium Compounds for Chemical Heat Storage: A Review
Lin, J., Deng, L., Lin, S., Qiu, H., Wu, R., Luo, X., & Huang, H. (2025) · Energy Technology · doi:10.1002/ente.202501001 · Cited by 4
Research progress on solid adsorption materials for low-temperature thermal storage in buildings
Wang, L., Ji, M., Luo, Y., Wang, Y., & Hu, J. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118571 · Cited by 4
Karch, A. E., Slimani, H., Rmail, S., harrak, A. E., Haouas, H., Sair, S., Faik, A., & Ousaleh, H. A. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.183806 · Cited by 4
Chemisorption heat storage for solar low-energy buildings
Kuznik, F. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100301-5.00017-5 · Cited by 4
Mahon, D., Henshall, P., Claudio, G., & Eames, P. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/556/1/012012 · Cited by 4
Thermal and Thermochemical Energy Conversion and Storage
Kildahl, H., Jiang, Z., Palacios, A., Song, C. L., Zhang, X., Zheng, H., Cao, H. Q., He, Z., Liu, X., Wang, L., et al. (2020) · ACS symposium series · doi:10.1021/bk-2020-1364.ch010 · Cited by 4
Self-citationHeitmann, S., Simon, T., Osburg, A., & Fröba, M. (2023) · Thermo · doi:10.3390/thermo3040035 · Cited by 4
Marias, F. (2015) · theses.fr (ABES) · doi:10.70675/285dc6bezb4bfz4091z8220zdaab102e13bd · Cited by 4
Schmidt, M. (2017) · OPUS Publication Server of the University of Stuttgart (University of Stuttgart) · doi:10.18419/opus-9433 · Cited by 4
Niederkofler, T., Giovannini, A., & Lackner, R. (2025) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2025.100814 · Cited by 3
Giampieri, A., Ling‐Chin, J., Rhodes, P., & Roskilly, A. P. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.121005 · Cited by 3
Zhang, R., Du, Y., Li, X., Zhu, T., Lei, B., & Wu, Y. N. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132026 · Cited by 3
He, C., Tang, Y., Chen, S., Huang, S., Xiong, Y., Bai, Y., Xu, J., Zhong, Y., Cheng, H., Wang, L., et al. (2025) · Journal of Food Composition and Analysis · doi:10.1016/j.jfca.2025.108013 · Cited by 3
Thermochemical energy storage – from fundamental research to TRL IV
Babinski, P., Kotyczka-Morańska, M., & Zuwała, J. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201910802013 · Cited by 3
Characterization of Ca-Dicarboxylate Salt Hydrates as Thermochemical Energy Storage Materials
Werner, J., Smith, J., Stöger, B., Artner, W., Werner, A. T., & Weinberger, P. (2023) · Crystals · doi:10.3390/cryst13101518 · Cited by 3
Mixed magnesium, cobalt, nickel, copper, and zinc sulfates as thermochemical heat storage materials
Smith, J. L., Weinberger, P., & Werner, A. T. (2024) · Measurement Energy · doi:10.1016/j.meaene.2024.100027 · Cited by 3
In silico characterisation of magnesium salt hydrates as energy storage materials
Iype, E. (2014) · TU/e Research Portal · doi:10.6100/ir770079 · Cited by 3
Sterner, M., & Stadler, I. (2014) · Springer eBooks · doi:10.1007/978-3-642-37380-0_10 · Cited by 2
Kebede, G. G., Franco, R., Izquierdo‐Ruiz, F., Lobato, Á., & Recio, J. M. (2025) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5c03991 · Cited by 2
Kalpana, Majumdar, R., & Saha, S. K. (2025) · Energy · doi:10.1016/j.energy.2025.139503 · Cited by 2
Mechanism-based kinetic modeling of magnesium sulfate hydration for thermochemical energy storage
Niederkofler, T., Giovannini, A., & Lackner, R. (2026) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2026.101048 · Cited by 2
Thermal performance evaluation of recycled salt hydrates through T-history
Wesemann, C. A., Junggeburth, T. J. W., & Brouwers, H. J. H. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2025.105961 · Cited by 2
A Chemical Bonding Interpretation of Unusual Compressibility Trends in Hydrated Magnesium Sulfates
Kebede, G. G., Franco, R., Izquierdo‐Ruiz, F., Lobato, Á., & Recio, J. M. (2025) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5c01765 · Cited by 2
Wong, B., van Helden, W. G. J., & Rosen, M. A. (2013) · Cited by 2
Analysis on hybrid compression-assisted sorption heat transformer for potential domestic heating
Wang, B., Lu, Y., Wang, R., Pan, Q., Zhang, X., & Jiang, L. (2023) · International Journal of Green Energy · doi:10.1080/15435075.2023.2194382 · Cited by 2
Tatsidjodoung, P. (2014) · theses.fr (ABES) · doi:10.70675/0e4f1818zf07az4105zaf7cz3f15b1f0c9a5 · Cited by 2
Marszałek, M. (2025) · Mineralogia · doi:10.2478/mipo-2025-0009 · Cited by 1
Exploring the potential of a potash by-product for thermochemical heat storage
Mamani, V., Gutiérrez, A., Fernández, A. I., & Ushak, S. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121164 · Cited by 1
Role of Coordination Motifs and Cluster Sizes in the Dehydration Thermodynamics of MgSO4· n H2O
Teshome, B., Kullgren, J., Mohammed, A. M., Tiruye, G. A., Hermansson, K., & Kebede, G. G. (2026) · ACS Omega · doi:10.1021/acsomega.6c04368 · Cited by 1
SrBr2/SrCl2-EG for low-temperature thermochemical energy storage
Li, S., Li, Z., Li, L., Tian, H., & Shu, G. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122959 · Cited by 1
Characterizing heat and mass transport in salt hydrate pellets for thermal energy storage
Morrell, M. R., Adams, M. J., Pomilia, M., & Menon, A. K. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124754 · Cited by 1
Monitoring of thermal properties of a composite material used in thermochemical heat storage
D’Ans, P., Hohenauer, W., Courbon, E., Frère, M., Degrez, M., & Descy, G. (2014) · Dépôt institutionnel de l'Université libre de Bruxelles (Université Libre de Bruxelles) · Cited by 1
Shirai, Y., & Osaka, N. (2016) · International Journal of Environmental Science and Development · doi:10.18178/ijesd.2016.7.10.878 · Cited by 1
Hydration / Dehydration Cycles of Salt Hydrates - Studied with NMR
Donkers, P. A. J., Pel, L., & Adan, O. C. G. (2015) · EuroSun Conference · doi:10.18086/eurosun.2014.10.10 · Cited by 1
Time dependent finite difference modeling of outgassing of asteroids via bulk heating
Sercel, J. C., Crawford, M. A., Dreyer, C. B., Unobe, E., Jedicke, R., Britt, D. T., & GERTSCH, L. S. (2018) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2018.8396701 · Cited by 1
Kato, Y., Funayama, S., Piperopoulos, E., & Milone, C. (2018) · Green energy and technology · doi:10.1007/978-3-319-96640-3_8 · Cited by 1
Werkstoffe – Phasenwechselmaterialien
Goeke, J. (2021) · Springer eBooks · doi:10.1007/978-3-658-34510-5_7 · Cited by 1
Quantum chemical analysis of the structures of MgSO4 hydrates
Iype, E., Ozen, C. C., Nedea, S. V., Rindt, C. C. M., & Zondag, H. H. (2012) · TU/e Research Portal · Cited by 1
Self-citationBardy, D. (2018) · Carleton University's Institutional Repository (MacOdrum Library, Carleton University) · doi:10.22215/etd/2018-13325 · Cited by 1
Investigation into the potential of MgSO4 for interseasonal domestic thermochemical energy storage
Mahon, D. (2018) · Loughborough University Institutional Repository (Loughborough University) · Cited by 1
Wimmer, S. (2023) · reposiTUm (TU Wien) · doi:10.34726/hss.2023.107402 · Cited by 1
Metal Organic Frameworks based materials for long term solar energy storage application
Permyakova, A. (2016) · theses.fr (ABES) · doi:10.70675/0748758bz4f34z4381za5adzc97b374a7250 · Cited by 1
System optimization of thermochemical energy storage reactors
Schmieder, L. (2026) · reposiTUm (TU Wien) · doi:10.34726/hss.2026.96504 · Cited by 1
Molenda, M., Bouché, M., Linder, M., & Wörner, A. (2013) · elib (German Aerospace Center)
Wang, R. Z., Wang, L., & Wu, J. (2014) · Wiley eBooks · doi:10.1002/9781118197448.ch2
Hybrid trigeneration - thermally activated heat pump technologies
Bannar-Martin, C. L. (2014) · doi:10.25560/27047
Modeling nanoscale transport phenomena: Implications for the continuum
Balasubramanian, G. (2011) · VTechWorks (Virginia Tech)
Grabski, A., Lasek, J. A., & Zuwała, J. (2017) · Polityka Energetyczna – Energy Policy Journal
Yu, N., & Wang, R. Z. (2015) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/n972014-01263
Sorption thermal energy storage for smart grids - A system-scale analysis
Scapino, L. (2019) · TU/e Research Portal · doi:10.13140/rg.2.2.15498.00964
Computational Modeling of Heat Transport and Volatile Extraction from Asteroid Materials
Sercel, J. C., Crawford, M. A., Dreyer, C. B., Unobe, E., Jedicke, R., Love, S. G., & GERTSCH, L. S. (2018) · ASCE International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth and Space) · doi:10.1061/9780784481899.041
Novel Solution for Improving the Hydrocarbon Production Utilizing Chemical Injection
Hassan, A. (2020) · International Journal of Environmental Sciences & Natural Resources · doi:10.19080/ijesnr.2020.23.556109
Chiu, Y. S., Kao, C. R., & Shigetou, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109065
Salviati, S. (2020) · PORTO@Iris
Kosteniuk, I. R. (2023) · Carleton University's Institutional Repository (MacOdrum Library, Carleton University) · doi:10.22215/etd/2023-15547
Alawadhi, A., & Zhai, Z. J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4531842
Thermochemical energy storage on "salt/supports" composites
Nguyen, M. H. (2022) · theses.fr (ABES) · doi:10.70675/11bd5426zb281z4fa2za68aze2af9d2d0c43
Mahon, D., & Eames, P. (2024) · Atlantis highlights in engineering/Atlantis Highlights in Engineering · doi:10.2991/978-94-6463-455-6_17
Thermochemical heat storage materials
Mahmoudi, A. H., Acar, C., & Shahi, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-44-313219-3.00021-6
Marques, J. V., SANTOS, F. M. D., Santos, R. S., Neto, J. G. D. O., dos Santos, J. C., SOUZA, M. V. D., Moreira, A. B. N., Lang, R., dos Santos, A. O., & Bandeira, M. A. (2025) · International Conference for Academia and Industry Cooperation & International Meeting in Materials Science and Engineering of Maranhão (ICAIC/IMMSEM) · doi:10.29327/9786527215745.1144147
Wang, L., Li, M., Men, Y., Jia, Y., & Ding, B. (2025) · Processes · doi:10.3390/pr13082589
Chen, W., Zhang, N., Li, D., Zhang, M., Huang, D., Huang, X., Wu, S., Wang, X., & Yue, Y. (2026) · Physical Chemistry Chemical Physics · doi:10.2139/ssrn.5431236
Mechanism and Properties of Carbon-Free Bonded Dry Vibration Mix Based on CaSO4–Mg(OH)2·2MgSO4
Zhao, S., Huang, A., Gu, H., & Zou, Y. (2025) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-025-01249-2
Stockage de chaleur dans l'habitat par sorption zéolite/H2O
Kamdem, S. M. (2016) · theses.fr (ABES) · doi:10.70675/6fde993fz55b4z496az8f19zf8d28de86eb9
Liao, Y., Lu, D., Cao, Y., Chen, R., Zhao, T., & Gong, M. (2026) · Energy · doi:10.1016/j.energy.2026.140957
Stockage thermochimique de la chaleur dans des matériaux composites pour des applications nomades
Touloumet, Q. (2022) · theses.fr (ABES) · doi:10.70675/3979f129z9f7az429ez9718z068a285c398a
Wotango, M. T., Wang, K., Liu, Y., & Wang, Z. (2026) · Advanced Engineering Materials · doi:10.1002/adem.70882
Lu, F., & Kaviany, M. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122588
Fotia, A., Salvo, R. D., Malara, A., Frazzica, A., & Brancato, V. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132617
Chen, X., Borzooei, M., Ghasemi, H., & Xu, B. L. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7227849
Li, W., Liu, X., Xie, B., & Li, C. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117379
Sewhunegn, A. W., Wang, K., Wotango, M. T., Bahru, T. B., Rass, M. E., & Liu, Y. (2026) · Energy Materials and Devices · doi:10.26599/emd.2026.9370099
Rapp, D. (2026) · IgMin Research · doi:10.61927/igmin363
Hao, C., Feng, G., 马昌杰, Huang, Y., Ding, Y., Barreneche, C., & She, X. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.125175
Ji, M., Ding, Z., Mo, J., & Ding, Y. (2026) · Applied Energy · doi:10.1016/j.apenergy.2026.129200
Metadata
- Authors
- van Essen, V. M., Zondag, H. A., Gores, J. C., Bleijendaal, L. P. J., Bakker, M., Schuitema, R., van Helden, W. G. J., He, Z., & Rindt, C. C. M.
- Affiliations
- Energy Research Centre of the Netherlands (NL)
- Eindhoven University of Technology (NL)
- Venue
- Journal of Solar Energy Engineering
- Publisher
- ASME International
- Published
- 2009-10-16
- Volume
- 131
- Issue
- 4
- ISSN
- 0199-6231 (ISSN-L)
- 1528-8986
- OpenAlex
- W2128670854
- Semantic Scholar
- 731a71a431ee100c16e7dfdba7e999ad1d3a0920
- Cited by
- 291
- References
- 10
- Citations by year
- 2026: 18 · 2025: 26 · 2024: 16 · 2023: 18 · 2022: 25 · 2021: 13 · 2020: 29 · 2019: 24 · 2018: 26 · 2017: 25 · 2016: 16 · 2015: 13 · 2014: 17 · 2013: 11 · 2012: 8
- FWCI
- 9.47
- Type
- journal article
- Language
- en
- Open access
- green
- resolver.tno.nl
- Locations
- Journal of Solar Energy Engineering (publishedVersion)
- TNO Repository (submittedVersion)
- TU/e Research Portal (submittedVersion)
- Repository hosted by TU Delft Library (TU Delft) (submittedVersion)
- Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
- Funders
- Technische Universiteit Eindhoven
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Keywords
- magnesium sulfate heptahydrate, salt hydrates, thermochemical energy storage, seasonal thermal energy storage, solar thermal energy storage, water vapor adsorption, hydration and dehydration, water vapor pressure, heat storage density, space heating
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-16, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-16 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.