Characterization of MgSO4 Hydrate for Thermochemical Seasonal Heat Storage
Open accessThe DOI matches its Crossref record; 9 of the 10 references it cites were found in a registry or an index; none of the 10 sources its claims cite is checked for support yet.
Abstract
Water vapor sorption in salt hydrates is one of the most promising means for compact, low loss, and long-term storage of solar heat in the built environment. One of the most interesting salt hydrates for compact seasonal heat storage is magnesium sulfate heptahydrate (MgSO4⋅7H2O). This paper describes the characterization of MgSO4⋅7H2O to examine its suitability for application in a seasonal heat storage system for the built environment. Both charging (dehydration) and discharging (hydration) behaviors of the material were studied using thermogravimetric differential scanning calorimetry, X-ray diffraction, particle distribution measurements, and scanning electron microscope. The experimental results show that MgSO4⋅7H2O can be dehydrated at temperatures below 150°C, which can be reached by a medium temperature (vacuum tube) collector. Additionally, the material was able to store 2.2 GJ/m3, almost nine times more energy than can be stored in water as sensible heat. On the other hand, the experimental results indicate that the release of the stored heat is more difficult. The amount of water taken up and the energy released by the material turned out to be strongly dependent on the water vapor pressure, temperature, and the total system pressure. The results of this study indicate that the application of MgSO4⋅7H2O at atmospheric pressure is problematic for a heat storage system where heat is released above 40°C using a water vapor pressure of 1.3 kPa. However, first experiments performed in a closed system at low pressure indicate that a small amount of heat can be released at 50°C and a water vapor pressure of 1.3 kPa. If a heat storage system has to operate at atmospheric pressure, then the application of MgSO4⋅7H2O for seasonal heat storage is possible for space heating operating at 25°C and a water vapor pressure of 2.1 kPa.
Overview
CoChat Summary
TL;DR
MgSO₄·7H₂O is characterized for seasonal thermochemical heat storage; it dehydrates below 150°C and its second dehydration step stores 2.2 GJ/m³, almost nine times water sensible heat. However, heat release is strongly limited by water vapor pressure and temperature, and atmospheric-pressure hydration is problematic for practical conditions above 40°C, though a low-pressure fixed-bed test showed a 4°C temperature lift.
Key findings
- Dehydration proceeds in at least three steps: first at 25–55°C with 6.9±0.2% mass loss (one H₂O); second at 60–265°C with 42.2±0.3% mass loss (5.9 H₂O) and an energy density of 2.2±0.1 GJ/m³, almost nine times water sensible heat (0.25 GJ/m³, 25–85°C); third near 275°C with 0.5±0.1% mass loss (0.1 H₂O). The second step is most interesting because it occurs below 150°C and avoids melting problems.
- Hydration at 25°C and 1 atm depends strongly on water vapor pressure: increasing P_H₂O from 1.3 kPa to 2.1 kPa raises uptake from one to six water molecules per MgSO₄. The single-step MgSO₄→MgSO₄·6H₂O hydration has an energy density of 1.8±0.1 GJ/m³, about 88% of the corresponding dehydration energy density (2.1±0.1 GJ/m³); at 1.3 kPa only 15% of stored energy is released (44.7 kJ/mol instead of 303 kJ/mol).
- At 50°C and P_H₂O=2.1 kPa, MgSO₄ is unable to take up water; under practical conditions (P_H₂O=1.3 kPa and T>40°C), the material cannot take up water at atmospheric pressure. A closed fixed-bed reactor at low pressure (evacuated to 2.8 mbar, reactor at 50°C, evaporator at 10°C, P_H₂O sat=1.3 kPa) showed a maximum temperature increase of 4°C, indicating a small amount of heat can be released.
- Melting occurs at 52.5°C, in good agreement with 50°C from Emons et al., and can reduce bed porosity and vapor transport; it was avoided with heating rates ≤1°C/min, particles <200 µm, and/or sample sizes ≤5 mg, which the paper notes will be difficult to meet in a large heat storage system. Particle size distribution had limited effect on hydration for the studied ranges, but layer thickness strongly affected hydration rate, indicating vapor transport through the layer is limiting.
Methods
- Reagent-grade MgSO₄·7H₂O (99.5% pure) was sieved into 20–38, 38–106, 106–200, and 200–500 µm fractions; unless stated otherwise, 38–106 µm particles were used. Thermal analysis used TG-DSC at ECN and Netzsch with Netzsch STA 409 PC Luxx and DSC 204 F1 Phoenix apparatus, nitrogen-water vapor flows, sample masses of 5–50 mg (standard 10 mg), and atmospheric pressure; hydration/dehydration were studied at 25°C and 50°C with P_H₂O of 1.3, 2.1, and 2.3 kPa.
- X-ray diffraction used a Bruker D8 Advance with MRI oven, Cu Kα1+α2=1.5418 Å, 2θ from 10° to 40°, 0.05° steps, 2 s per step; 150 mg samples were dehydrated from 25°C to 300°C at 1°C/min and hydrated at 25°C. SEM used a JEOL JSM 6330F with platinum-coated samples at 5–15 kV and 50–1500× magnification; particle size distribution used a Malvern Master 2000 laser diffraction instrument with MgSO₄-ethanol suspension and ultrasound.
- A fixed-bed reactor test used a 98 ml storage volume, 25 g MgSO₄·7H₂O dehydrated at 150°C, connected to an evaporator at 10°C and a vacuum pump system; the system was evacuated to 2.8 mbar, the reactor was held at 50°C, and thermocouples monitored temperature during hydration.
Limitations
- The paper states that the local water vapor pressure near the sample at ECN was not determined; possible incomplete gas mixing led the authors to assume 2.3 kPa instead of 1.3 kPa, and more experiments are required to verify this. It also states that the second dehydration step could not be clearly resolved into individual steps, the MgSO₄·2H₂O intermediate was not confirmed by XRD, and more research is needed to understand particle size behavior and the low-pressure process and actual energy released.
- The paper states that atmospheric-pressure application is problematic for heat release above 40°C at P_H₂O=1.3 kPa, and at 50°C and 2.1 kPa no water uptake occurred. The low-pressure fixed-bed result is described as an initial test with only a 4°C temperature lift, and the actual amount of energy released was not determined.
- Evident from the text: thermal analysis used small samples (5–50 mg, standard 10 mg) and the fixed-bed test used 25 g, so scale-up to a large storage system is not demonstrated; the melting-avoidance criteria (≤1°C/min, <200 µm, ≤5 mg) are noted as difficult to meet in large quantities. The ECN versus Netzsch discrepancy also indicates measurement/atmosphere uncertainty.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 0 Not valid · 12 Not checked · 84 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the reaction primarily occurs in a temperature range that can be covered by medium temperature collectors ͑Յ150° C͒”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The effect of increasing the temperature from 25° C ͑curve 2 in Fig. 4͒ to 50° C at constant water vapor pressure of 2.1 kPa is evident: MgSO 4 is unable to take up water at 50° C.”
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, first experiments performed in a closed system at low pressure indicate that a small amount of heat can be released at 50° C and a water vapor pressure of 1.3 kPa.”
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The results show that the dehydration of MgSO 4 •7H 2 O proceeds in at least three steps”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Hydration experiments performed at atmospheric pressure reveal that the amount of water taken up by MgSO 4 depends on partial water vapor pressure and the temperature.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
57 more claims
Create a free account to see all 96 claims and to verify the 7 references still open.
- It may state two separate claims as one. 28
- Probably not a substantial claim. 8
Citations
Cites
Ullmann's Encyclopedia of Industrial Chemistry
(2012) · Choice Reviews Online · doi:10.5860/choice.50-1224 · Cited by 3,049
A Fundamental Equation of State for Heavy Water
Hill, P. G., MacMillan, R. D. C., & Lee, V. (1982) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555661 · Cited by 1,503
(1982) · Medical Entomology and Zoology · Cited by 1,294
Introduction to Thermal Analysis
Brown, M. E. (1988) · Springer eBooks · doi:10.1007/978-94-009-1219-9 · Cited by 685
Experimental stability of magnesium sulfate hydrates that may be present on Mars
Chipera, S. J., & Vaniman, D. T. (2007) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2006.07.044 · Cited by 175
Ruiz-Agudo, E., Martín-Ramos, J. D., & Rodriguez-Navarro, C. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp064460b · Cited by 59
Emons, H. H., Ziegenbalg, G., Naumann, R., & Paulik, F. (1990) · Journal of Thermal Analysis · doi:10.1007/bf01914050 · Cited by 37
First studies in reactor concepts for Thermochemical Storage
Schuitema, R., van Helden, W. G. J., Zondag, H. A., Krosse, L., van Essen, V. M., Bleijendaal, L. P. J., & Kalbasenka, A. N. (2009) · TNO Repository · Cited by 37
Self-citationCompacte chemische seizoenopslag van zonnewarmte Eindrapportage
. (2004) · TNO Repository
Cited by
Sorption thermal storage for solar energy
Yu, N., Wang, R. Z., & Wang, L. W. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.05.004 · Cited by 589
The latest advancements on thermochemical heat storage systems
Aydin, D., Casey, S. P., & Riffat, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.054 · Cited by 576
Adsorption-Driven Heat Pumps: The Potential of Metal–Organic Frameworks
de Lange, M. F., Verouden, K. J. F. M., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00059 · Cited by 510
Lizana, J., Chacartegui, R., Barrios-Padura, A., & Valverde, J. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.008 · Cited by 410
A review of salt hydrates for seasonal heat storage in domestic applications
Donkers, P. A. J., Sögütoglu, L. C., Huinink, H. P., Fischer, H. R., & Adan, O. C. G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.080 · Cited by 403
Gores, J. C., Castell, A., & Cabeza, L. F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.007 · Cited by 387
Self-citationSadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Scapino, L., Zondag, H. A., Van Bael, J., Diriken, J., & Rindt, C. C. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.148 · Cited by 376
Self-citationSorption thermal energy storage: Concept, process, applications and perspectives
Zhang, Y., & Wang, R. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.02.024 · Cited by 327
Closed and open thermochemical energy storage: Energy- and exergy-based comparisons
Abedin, A. H., & Rosen, M. A. (2011) · Energy · doi:10.1016/j.energy.2011.06.034 · Cited by 211
Thermochemical energy storage system for cooling and process heating applications: A review
Desai, F., Sunku Prasad, J., Muthukumar, P., & Rahman, M. M. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113617 · Cited by 196
Salt hydrate phase change materials: Current state of art and the road ahead
Dixit, P., Reddy, V. J., Parvate, S., Balwani, A., Singh, J., Maiti, T. K., Dasari, A., & Chattopadhyay, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104360 · Cited by 179
Development and characterization of silica gel–LiCl composite sorbents for thermal energy storage
Yu, N., Wang, R. Z., Lu, Z. S., & Wang, L. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.02.012 · Cited by 176
Whiting, G. T., Grondin, D., Bennici, S. M., & Auroux, A. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.01.020 · Cited by 174
Whiting, G. T., Grondin, D., Stošić, D., Bennici, S. M., & Auroux, A. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.016 · Cited by 163
Thermochemical seasonal solar energy storage for heating and cooling of buildings
Krese, G., Koželj, R., Butala, V., & Stritih, U. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.12.057 · Cited by 159
Lin, J., Zhao, Q., Huang, H., Mao, H., Liu, Y., & Xiao, Y. (2021) · Solar Energy · doi:10.1016/j.solener.2020.11.055 · Cited by 150
Advanced low-carbon energy measures based on thermal energy storage in buildings: A review
Lizana, J., Chacartegui, R., Padura, Á. B., & Ortiz, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.093 · Cited by 169
Zhang, Y., Wang, R. Z., Zhao, Y., Li, T., Riffat, S., & Wajid, N. (2016) · Energy · doi:10.1016/j.energy.2016.08.108 · Cited by 149
Jarimi, H., Aydın, D., Yanan, Z., Ozankaya, G., Chen, X., & Riffat, S. (2018) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cty052 · Cited by 143
Korhammer, K., Druske, M.-M., Fopah‐Lele, A., Rammelberg, H. U., Wegscheider, N., Opel, O., Osterland, T., & Ruck, W. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.037 · Cited by 141
A systematic screening of salt hydrates as materials for a thermochemical heat transformer
Richter, M., Habermann, E.-M., Siebecke, E., & Linder, M. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.06.011 · Cited by 146
A Review on the Properties of Salt Hydrates for Thermochemical Storage
Trausel, F., de Jong, A.-J., & Cuypers, R. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.02.053 · Cited by 139
Advances and opportunities in thermochemical heat storage systems for buildings applications
Kant, K., & Pitchumani, R. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119299 · Cited by 141
Courbon, E., D’Ans, P., Permyakova, A., Skrylnyk, O., Steunou, N., Degrez, M., & Frère, M. (2017) · Solar Energy · doi:10.1016/j.solener.2017.08.034 · Cited by 127
Zhao, Y., Wang, R. Z., Zhang, Y., & Yu, N. (2016) · Energy · doi:10.1016/j.energy.2016.09.013 · Cited by 125
Thermochemical heat storage materials – Performance of mixed salt hydrates
Rammelberg, H. U., Osterland, T., Priehs, B., Opel, O., & Ruck, W. (2016) · Solar Energy · doi:10.1016/j.solener.2016.07.016 · Cited by 120
Characterization of potassium carbonate salt hydrate for thermochemical energy storage in buildings
Gaeini, M., Shaik, S., & Rindt, C. C. M. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.05.029 · Cited by 120
Self-citationThermochemical energy storage technologies for building applications: a state-of-the-art review
Ding, Y., & Riffat, S. (2012) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cts004 · Cited by 129
Study on consolidated composite sorbents impregnated with LiCl for thermal energy storage
Yu, N., Wang, R. Z., Lu, Z. S., & Wang, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.065 · Cited by 110
Study of the hydration behavior of zeolite-MgSO4 composites for long-term heat storage
Xu, C., Yu, Z., Xie, Y., Ren, Y., Ye, F., & Jü, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.031 · Cited by 108
Parameterization of a reactive force field using a Monte Carlo algorithm
Iype, E., Hütter, M., Jansen, A. P. J., Nedea, S. V., & Rindt, C. C. M. (2013) · Journal of Computational Chemistry · doi:10.1002/jcc.23246 · Cited by 107
Self-citationNew salt hydrate composite for low-grade thermal energy storage
Mehrabadi, A., & Farid, M. M. (2018) · Energy · doi:10.1016/j.energy.2018.08.192 · Cited by 97
A new strontium bromide MOF composite with improved performance for solar energy storage application
D’Ans, P., Courbon, E., Permyakova, A., Nouar, F., Simonnet‐Jégat, C., Bourdreux, F., Malet, L., Serre, C., Frère, M., & Steunou, N. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100881 · Cited by 97
Modeling of thermochemical energy storage by salt hydrates
Balasubramanian, G., Ghommem, M., Hajj, M. R., Wong, W. P., Tomlin, J. A., & Puri, I. K. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.08.012 · Cited by 97
Experimental Studies of the Mechanism and Kinetics of Hydration Reactions
Linnow, K., Niermann, M., Bonatz, D., Posern, K., & Steiger, M. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.02.046 · Cited by 85
Roles of thermal energy storage technology for carbon neutrality
Sun, M., Liu, T., Wang, X., Liu, T., Li, M., Chen, G., & Jiang, D. (2023) · Carbon Neutrality · doi:10.1007/s43979-023-00052-w · Cited by 108
Li, W., Zeng, M., & Wang, Q. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110509 · Cited by 93
Li, W., Klemeš, J. J., Wang, Q., & Zeng, M. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.05.062 · Cited by 93
Wang, Q., Xie, Y., Ding, B., Yu, G.-L., Ye, F., & Xu, C. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110047 · Cited by 90
Li, W., Guo, H. R., Zeng, M., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111843 · Cited by 90
Zbair, M., & Bennici, S. M. (2021) · Energies · doi:10.3390/en14113105 · Cited by 95
Review of salt hydrates-based thermochemical adsorption thermal storage technologies
Hua, W., Yan, H., Zhang, X., Xu, X., Zhang, L., & Shi, Y. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106158 · Cited by 90
Optimization of thermochemical energy storage systems based on hydrated salts: A review
Zhao, Q., Lin, J., Huang, H., Wu, Q. Y., Shen, Y., & Xiao, Y. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111035 · Cited by 91
Fisher, R. D., Ding, Y., & Sciacovelli, A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102561 · Cited by 86
Ferchaud, C. C., Zondag, H. H., Veldhuis, J. B. J., & de Boer, R. (2012) · Journal of Physics Conference Series · doi:10.1088/1742-6596/395/1/012069 · Cited by 85
Self-citationThe size of sorbents in low pressure sorption or thermochemical energy storage processes
N’Tsoukpoe, K. E., Restuccia, G., Schmidt, T., & Py, X. (2014) · Energy · doi:10.1016/j.energy.2014.10.013 · Cited by 82
Brancato, V., Calabrese, L., Palomba, V., Frazzica, A., Fullana, M., Solé, A., & Cabeza, L. F. (2018) · Solar Energy · doi:10.1016/j.solener.2018.08.075 · Cited by 77
Posern, K., Linnow, K., Niermann, M., Kaps, C., & Steiger, M. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.04.031 · Cited by 75
Zhao, Y., Wang, R. Z., Li, T., & NOMURA, Y. (2016) · Energy · doi:10.1016/j.energy.2016.07.100 · Cited by 74
Thermodynamic study of MgSO4 – H2O system dehydration at low pressure in view of heat storage
Okhrimenko, L., Loïc Favergeon, A., Johannes, K., Kuznik, F., & Pijolat, M. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.08.015 · Cited by 74
Yan, T., & Zhang, H. (2022) · Solar Energy · doi:10.1016/j.solener.2022.07.002 · Cited by 72
Liu, H., Nagano, K., Sugiyama, D., Togawa, J., & Nakamura, M. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.021 · Cited by 72
Thermodynamic analysis and experimental study of solid/gas reactor operating in open mode
Marias, F., Neveu, P., Tanguy, G., & Papillon, P. (2014) · Energy · doi:10.1016/j.energy.2014.01.101 · Cited by 71
Mahon, D., Henshall, P., Claudio, G., & Eames, P. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.135 · Cited by 70
Masood, U., Haggag, M., Hassan, A., & Laghari, M. S. (2023) · Buildings · doi:10.3390/buildings13071595 · Cited by 68
Steiger, M. (2018) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2018.01.017 · Cited by 65
Mahon, D., Claudio, G., & Eames, P. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.080 · Cited by 64
Yan, T., Li, T., Xu, J., & Chao, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114655 · Cited by 63
Hydration behavior of MgSO4–ZnSO4 composites for long-term thermochemical heat storage application
Rehman, A. U., Khan, M., & Mao-sheng, Z. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101026 · Cited by 61
Thermochemical Energy Storage Based on Salt Hydrates: A Comprehensive Review
Spietz, T., Fryza, R., Lasek, J. A., & Zuwała, J. (2025) · Energies · doi:10.3390/en18102643 · Cited by 66
Application of lithium orthosilicate for high-temperature thermochemical energy storage
Takasu, H., Ryu, J., & Kato, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.029 · Cited by 58
Lizana, J., Chacartegui, R., Padura, Á. B., Valverde, J. M., & Ortiz, C. (2018) · Materiales de Construcción · doi:10.3989/mc.2018.10517 · Cited by 62
Yu, N., Wang, R. Z., & Wang, L. (2015) · Energy · doi:10.1016/j.energy.2015.10.001 · Cited by 57
Chen, W., Li, W., & Zhang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.043 · Cited by 57
Salviati, S., Carosio, F., Cantamessa, F., Medina, L., Berglund, L. A., Saracco, G., & Fina, A. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.07.036 · Cited by 55
Hongois, S. (2011) · theses.fr (ABES) · doi:10.70675/537e10c8z3be1z41c3za902z6b62504c7f0b · Cited by 55
A review on thermochemical seasonal solar energy storage materials and modeling methods
Abdullah, A., Koushaeian, M., Shah, N. A., & Chung, J. D. (2024) · International Journal of Air-Conditioning and Refrigeration · doi:10.1007/s44189-023-00044-6 · Cited by 57
Ousaleh, H. A., Sair, S., Zaki, A., Faik, A., Igartua, J. M., & Bouari, A. E. (2020) · Solar Energy · doi:10.1016/j.solener.2020.03.067 · Cited by 54
Hydration of salts as a two-step process: Water adsorption and hydrate formation
Söğütoğlu, L.-C., Birkelbach, F., Werner, A. T., Fischer, H., Huinink, H., & Adan, O. C. G. (2020) · Thermochimica Acta · doi:10.1016/j.tca.2020.178819 · Cited by 54
Zhao, Q., Lin, J., Huang, H., Xie, Z., & Xiao, Y. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104259 · Cited by 53
Nguyen, M. H., Zbair, M., Dutournié, P., Gervasini, A., Vaulot, C., & Bennici, S. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111696 · Cited by 52
Okhrimenko, L., Favergeon, L., Johannes, K., & Kuznik, F. (2020) · Thermochimica Acta · doi:10.1016/j.tca.2020.178569 · Cited by 52
Zhang, Y., Qi, M., Jia, X., Jin, Y., Li, Z., Tan, L., & Ding, Y. (2021) · Solar Energy · doi:10.1016/j.solener.2021.05.054 · Cited by 52
Kleiner, F., Posern, K., & Osburg, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.125 · Cited by 53
Ousaleh, H. A., Sair, S., Mansouri, S., Abboud, Y., Faik, A., & Bouari, A. E. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110601 · Cited by 50
Sutton, R., Jewell, E., Elvins, J., Searle, J. R., & Jones, P. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.11.068 · Cited by 49
Hybrid 3 in 1 thermal energy storage system – Outlook for a novel storage strategy
Palacios, A., Navarro, M. E., Barreneche, C., & Ding, Y. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115024 · Cited by 52
Yang, H. F., Wang, C., Tong, L., Yin, S., Wang, L., & Ding, Y. (2023) · Energies · doi:10.3390/en16062875 · Cited by 47
Böhm, H., & Lindorfer, J. (2019) · Energy · doi:10.1016/j.energy.2019.04.177 · Cited by 47
DFT Study on Characterization of Hydrogen Bonds in the Hydrates of MgSO4
Iype, E., Nedea, S. V., Rindt, C. C. M., van Steenhoven, A. A., Zondag, H. A., & Jansen, A. P. J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3025649 · Cited by 46
Self-citationNguyen, M. H., Zbair, M., Dutournié, P., & Bennici, S. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106452 · Cited by 46
Ferchaud, C. J., Scherpenborg, R. A. A., Zondag, H. A., & de Boer, R. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.10.252 · Cited by 44
Self-citationA DFT based equilibrium study on the hydrolysis and the dehydration reactions of MgCl2 hydrates
Smeets, B., Iype, E., Nedea, S. V., Zondag, H. A., & Rindt, C. C. M. (2013) · The Journal of Chemical Physics · doi:10.1063/1.4822001 · Cited by 44
Self-citationLife Cycle Assessment of Innovative Materials for Thermal Energy Storage in Buildings
Horn, R., Burr, M., Fröhlich, D., Gschwander, S., Held, M., Lindner, J. P., Munz, G., Nienborg, B., & Schossig, P. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.095 · Cited by 44
Calabrese, L., Brancato, V., Palomba, V., Frazzica, A., & Cabeza, L. F. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.109992 · Cited by 44
Review of Solar Thermochemical Heat Storage Equipment and Systems Based on Calcium-Looping
Wu, H., Luo, C., Luo, T., Zhang, L., Zhang, X., & Wu, F. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114146 · Cited by 48
Towards stable performance of salt hydrates in thermochemical energy storage: A review
Aarts, J., Fischer, H., Adan, O. C. G., & Huinink, H. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115726 · Cited by 43
A Study of the Hydration and Dehydration Transitions of Srcl2 Hydrates for Use in Heat Storage
Blijlevens, M. A. R., Mazur, N., Kooijman, W., Fischer, H., Huinink, H., Meekes, H., & Vlieg, E. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111770 · Cited by 41
Ousaleh, H. A., Sair, S., Zaki, A., Faik, A., & Bouari, A. E. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.04.354 · Cited by 39
Review of Technologies and Recent Advances in Low-Temperature Sorption Thermal Storage Systems
Ayaz, H., Chinnasamy, V., Yong, J., & Cho, H. (2021) · Energies · doi:10.3390/en14196052 · Cited by 41
Salt in matrix for thermochemical energy storage - A review
Mohapatra, D., & Nandanavanam, J. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.05.453 · Cited by 39
Long-term impact of air pollutants on thermochemical heat storage materials
Bennici, S. M., Polimann, T., Ondarts, M., Gonze, E., Vaulot, C., & Pierrès, N. L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109473 · Cited by 38
Salt inclusion and deliquescence in salt/zeolite X composites for thermochemical heat storage
Nonnen, T., Preißler-Kurzhöfer, H., Kött, S., Beckert, S., & Gläser, R. J. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110239 · Cited by 37
Chemisorption heat storage in buildings: State-of-the-art and outlook
Kuznik, F., Johannes, K., & Obrecht, C. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.07.002 · Cited by 36
Jarimi, H., Aydın, D., Zhang, Y., Ding, Y., Ramadan, O., Chen, X., Dodo, A., Utlu, Z., & Riffat, S. (2017) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctx017 · Cited by 36
Thermal energy storage in porous materials with adsorption and desorption of moisture
Pal, S., Hajj, M. R., Wong, W. P., & Puri, I. K. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.10.023 · Cited by 35
Skrylnyk, O., Courbon, E., Heymans, N., Frère, M., Bougard, J., & Descy, G. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.08.015 · Cited by 34
Ferchaud, C. C., Zondag, H. H., Boer, D. R., & Rindt, C. C. M. (2012) · TU/e Research Portal · Cited by 34
Self-citationShere, L., Trivedi, S., Roberts, S., Sciacovelli, A., & Ding, Y. (2018) · Heat Transfer Engineering · doi:10.1080/01457632.2018.1457266 · Cited by 34
Metadata
- Authors
- van Essen, V. M., Zondag, H. A., Gores, J. C., Bleijendaal, L. P. J., Bakker, M., Schuitema, R., van Helden, W. G. J., He, Z., & Rindt, C. C. M.
- Affiliations
- Energy Research Centre of the Netherlands (NL)
- Eindhoven University of Technology (NL)
- Venue
- Journal of Solar Energy Engineering
- Publisher
- ASME International
- Published
- 2009-10-16
- Volume
- 131
- Issue
- 4
- ISSN
- 0199-6231 (ISSN-L)
- 1528-8986
- OpenAlex
- W2128670854
- Semantic Scholar
- 731a71a431ee100c16e7dfdba7e999ad1d3a0920
- Cited by
- 291
- References
- 10
- Citations by year
- 2026: 18 · 2025: 26 · 2024: 16 · 2023: 18 · 2022: 25 · 2021: 13 · 2020: 29 · 2019: 24 · 2018: 26 · 2017: 25 · 2016: 16 · 2015: 13 · 2014: 17 · 2013: 11 · 2012: 8
- FWCI
- 9.47
- Type
- journal article
- Language
- en
- Open access
- green
- resolver.tno.nl
- Locations
- Journal of Solar Energy Engineering (publishedVersion)
- TNO Repository (submittedVersion)
- TU/e Research Portal (submittedVersion)
- Repository hosted by TU Delft Library (TU Delft) (submittedVersion)
- Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
- Funders
- Technische Universiteit Eindhoven
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Keywords
- magnesium sulfate heptahydrate, salt hydrates, thermochemical energy storage, seasonal thermal energy storage, solar thermal energy storage, water vapor adsorption, hydration and dehydration, water vapor pressure, heat storage density, space heating
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-16, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-16 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.