The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Cohesive Zone Models: A Critical Review of Traction-Separation Relationships Across Fracture Surfaces
Open accessAbstract
One of the fundamental aspects in cohesive zone modeling is the definition of the traction-separation relationship across fracture surfaces, which approximates the nonlinear fracture process. Cohesive traction-separation relationships may be classified as either nonpotential-based models or potential-based models. Potential-based models are of special interest in the present review article. Several potential-based models display limitations, especially for mixed-mode problems, because of the boundary conditions associated with cohesive fracture. In addition, this paper shows that most effective displacement-based models can be formulated under a single framework. These models lead to positive stiffness under certain separation paths, contrary to general cohesive fracture phenomena wherein the increase of separation generally results in the decrease of failure resistance across the fracture surface (i.e., negative stiffness). To this end, the constitutive relationship of mixed-mode cohesive fracture should be selected with great caution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Rice, J. R. (1968) · Journal of Applied Mechanics · doi:10.1115/1.3601206 · Cited by 8,421
Yielding of steel sheets containing slits
Dugdale, D. S. (1960) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(60)90013-2 · Cited by 7,766
Hillerborg, A., Modéer, M., & Petersson, P.-E. (1976) · Cement and Concrete Research · doi:10.1016/0008-8846(76)90007-7 · Cited by 6,874
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture
Barenblatt, G. I. (1962) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70121-2 · Cited by 5,277
Suresh, S. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511806575 · Cited by 4,526
Benzeggagh, M. L., & Kenane, M. (1996) · Composites Science and Technology · doi:10.1016/0266-3538(96)00005-x · Cited by 3,028
Fracture and Size Effect in Concrete and Other Quasibrittle Materials
Bažant, Z. P., & Planas, J. (2019) · Routledge eBooks · doi:10.1201/9780203756799 · Cited by 2,636
Numerical simulations of fast crack growth in brittle solids
Xu, X., & Needleman, A. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90003-5 · Cited by 2,479
A Continuum Model for Void Nucleation by Inclusion Debonding
Needleman, A. (1987) · Journal of Applied Mechanics · doi:10.1115/1.3173064 · Cited by 2,168
Computational modelling of impact damage in brittle materials
Camacho, G., & Ortíz, M. (1996) · International Journal of Solids and Structures · doi:10.1016/0020-7683(95)00255-3 · Cited by 2,037
Fracture mechanics : fundamentals and applications
Anderson, T. (1995) · Cited by 2,002
Tvergaard, V., & Hutchinson, J. W. (1992) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(92)90020-3 · Cited by 1,713
An Introduction to Continuum Mechanics
Gurtin, M. E., & Drugan, W. J. (1984) · Journal of Applied Mechanics · doi:10.1115/1.3167763 · Cited by 1,704
Extended finite element method for cohesive crack growth
Moës, N., & Belytschko, T. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(01)00128-x · Cited by 1,607
Dislocation nucleation from a crack tip: An analysis based on the Peierls concept
Rice, J. R. (1992) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(05)80012-2 · Cited by 1,590
Peierls, R. (1940) · Proceedings of the Physical Society · doi:10.1088/0959-5309/52/1/305 · Cited by 1,491
Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis
Ortiz, M., & Pandolfi, A. (1999) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19990330)44:9<1267::aid-nme486>3.0.co;2-7 · Cited by 1,425
Barenblatt, G. I. (1959) · Journal of Applied Mathematics and Mechanics · doi:10.1016/0021-8928(59)90157-1 · Cited by 1,339
The cohesive zone model: advantages, limitations and challenges
Elices, M., Guinea, G. V., Gómez, F. J., & Planas, J. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(01)00083-2 · Cited by 1,223
Stability of structures: elastic, inelastic, fracture, and damage theories
(1991) · Choice Reviews Online · doi:10.5860/choice.29-1533 · Cited by 1,039
A new method for modelling cohesive cracks using finite elements
Wells, G. N., & Sluys, L. J. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.143 · Cited by 926
Two Parameter Fracture Model for Concrete
Jenq, Y., & Shah, S. P. (1985) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1985)111:10(1227 · Cited by 891
Simo, J. C., Oliver, J., & Armero, F. (1993) · Computational Mechanics · doi:10.1007/bf00372173 · Cited by 868
Crack growth and development of fracture zones in plain concrete and similar materials
Petersson, P.-E. (1981) · Lund University Publications (Lund University) · Cited by 859
Void nucleation by inclusion debonding in a crystal matrix
Xu, X., & Needleman, A. (1993) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/1/2/001 · Cited by 779
Effect of fibre debonding in a whisker-reinforced metal
Tvergaard, V. (1990) · Materials Science and Engineering A · doi:10.1016/0921-5093(90)90170-8 · Cited by 704
An analysis of tensile decohesion along an interface
Needleman, A. (1990) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(90)90001-k · Cited by 628
Impact-induced delamination of composites: a 2D simulation
Geubelle, P. H., & Baylor, J. S. (1998) · Composites Part B Engineering · doi:10.1016/s1359-8368(98)00013-4 · Cited by 609
Mixed-mode bending method for delamination testing
Reeder, J. R., & Crews, J. H. (1990) · AIAA Journal · doi:10.2514/3.25204 · Cited by 598
An irreversible cohesive zone model for interface fatigue crack growth simulation
Roe, K. L., & Siegmund, T. H. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(02)00034-6 · Cited by 555
On the influence of the shape of the interface law on the application of cohesive-zone models
Alfano, G. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.12.024 · Cited by 526
A unified potential-based cohesive model of mixed-mode fracture
Park, K., Paulino, G. H., & Roesler, J. R. (2008) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2008.10.003 · Cited by 498
Self-citation(1996) · Choice Reviews Online · doi:10.5860/choice.33-4528 · Cited by 458
Microscopic and molecular fundamentals of crazing
Kramer, E. J. (2005) · Advances in Polymer Science · doi:10.1007/bfb0024055 · Cited by 422
Song, S. H., Paulino, G. H., & Buttlar, W. G. (2006) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2006.04.030 · Cited by 410
Self-citationMicromechanics of crack bridging in fibre-reinforced concrete
Li, V. C., Stang, H., & Krenchel, H. (1993) · Materials and Structures · doi:10.1007/bf02472808 · Cited by 388
The mixed-mode bending method for delamination testing
Reeder, J., & JOHN CREWS, Jr. (1989) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.1989-1347 · Cited by 378
Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds
Gao, H., & Klein, P. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00047-1 · Cited by 346
Determination of cohesive laws by the J integral approach
Sørensen, B. F., & Jacobsen, T. K. (2003) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(03)00127-9 · Cited by 306
From continuum mechanics to fracture mechanics: the strong discontinuity approach
Oliver, J., Huespe, A. E., Pulido, M. D. G., & Chaves, E. W. V. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(01)00060-1 · Cited by 301
Finite elements with embedded strong discontinuities for the modeling of failure in solids
Linder, C., & Armero, F. (2007) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2042 · Cited by 262
The cohesive law for the particle/matrix interfaces in high explosives
Tan, H., Liu, C., Huang, Y., & Geubelle, P. H. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.01.009 · Cited by 237
Concrete fracture prediction using bilinear softening
Roesler, J. R., Paulino, G. H., Park, K., & Gaedicke, C. (2006) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.002 · Cited by 236
Self-citationPark, K., & Paulino, G. H. (2012) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2012.02.007 · Cited by 231
Self-citationA comparison of the fracture criteria of griffith and barenblatt
Willis, J. R. (1967) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(67)90029-4 · Cited by 223
Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials
Zhang, Z., & Paulino, G. H. (2004) · International Journal of Plasticity · doi:10.1016/j.ijplas.2004.06.009 · Cited by 216
Self-citationde-Andrés, A., Pérez–Aparicio, J. L., & Ortíz, M. (1999) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(98)00059-6 · Cited by 216
Modeling of the competition between shear yielding and crazing in glassy polymers
Estevez, R., Tijssens, M. G. A., & Van der Giessen, E. (2000) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(00)00016-8 · Cited by 188
Klein, P. A., Foulk, J. W., Chen, E. P., Wimmer, S. A., & Gao, H. J. (2001) · Theoretical and Applied Fracture Mechanics · doi:10.1016/s0167-8442(01)00091-x · Cited by 178
Cohesive fracture model for functionally graded fiber reinforced concrete
Park, K., Paulino, G. H., & Roesler, J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.004 · Cited by 175
Self-citationA cohesive model for fatigue failure of polymers
Maiti, S., & Geubelle, P. H. (2004) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2004.06.005 · Cited by 169
A micromechanical model for a viscoelastic cohesive zone
Allen, D. H., & Searcy, C. R. (2001) · International Journal of Fracture · doi:10.1023/a:1007693116116 · Cited by 155
Extrinsic cohesive modelling of dynamic fracture and microbranching instability in brittle materials
Zhang, Z., Paulino, G. H., & Celes, W. (2007) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2030 · Cited by 155
Self-citationEstimates from atomic models of tension-shear coupling in dislocation nucleation from a crack tip
Sun, Y., Beltz, G. E., & RICE, J. R. (1993) · Materials Science and Engineering A · doi:10.1016/0921-5093(93)90370-t · Cited by 151
Modeling of crazing using a cohesive surface methodology
Tijssens, M. G. A., der Giessen, E. V., & Sluys, L. J. (2000) · Mechanics of Materials · doi:10.1016/s0167-6636(99)00044-7 · Cited by 132
Modeling fracture in nanomaterials via a virtual internal bond method
Gao, H., & Ji, B. (2003) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(03)00124-3 · Cited by 126
Shen, B., & Paulino, G. H. (2010) · Experimental Mechanics · doi:10.1007/s11340-010-9342-6 · Cited by 123
Self-citationA cohesive zone model for fatigue crack growth allowing for crack retardation
Ural, A., Krishnan, V. R., & Papoulia, K. D. (2009) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2009.01.031 · Cited by 115
Fracture Mechanics of Bond in Reinforced Concrete
Ingraffea, A. R., Gerstk, W. H., Gergely, P., & Saouma, V. E. (1984) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1984)110:4(871 · Cited by 111
Micromechanical Model for Heterogeneous Asphalt Concrete Mixtures Subjected to Fracture Failure
Aragão, F. T. S., Kim, Y., Lee, J.-H., & Allen, D. H. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000004 · Cited by 109
Formulation of a three-dimensional cohesive zone model for application to a finite element algorithm
Foulk, J. W., Allen, D. H., & Helms, K. L. E. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00211-x · Cited by 108
A discrete dislocation analysis of near-threshold fatigue crack growth
Deshpande, V. S., Needleman, A., & der Giessen, E. V. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00220-8 · Cited by 106
Micromechanics of crack growth into a craze in a polymer glass
Hui, C., Ruina, A. L., Creton, C., et al. (1992) · Macromolecules · doi:10.1021/ma00041a018 · Cited by 104
Determination of the kink point in the bilinear softening model for concrete
Park, K., Paulino, G. H., & Roesler, J. R. (2008) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2008.02.002 · Cited by 102
Self-citationA multiscale cohesive zone model and simulations of fractures
Zeng, X., & Li, S. (2009) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2009.10.008 · Cited by 93
Effect of an interphase region on debonding of a CNT reinforced polymer composite
Needleman, A., Borders, T. L., Brinson, L. C., Flores, V., & Schadler, L. S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.09.002 · Cited by 91
Simulation of the fracture process in rock with application to hydrofracturing
Boone, T. J., Wawrzynek, P. A., & Ingraffea, A. R. (1986) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(86)90971-x · Cited by 79
Rate-dependent crack growth in adhesives
Xu, C., Siegmund, T. H., & Ramani, K. (2003) · International Journal of Adhesion and Adhesives · doi:10.1016/s0143-7496(02)00062-3 · Cited by 78
Cohesive Zone Models and Fracture
Hui, C., Ruina, A. L., Long, R., & Jagota, A. (2011) · The Journal of Adhesion · doi:10.1080/00218464.2011.538315 · Cited by 70
Fracture and fragmentation of simplicial finite element meshes using graphs
Mota, A., Knap, J., & Ortíz, M. (2007) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2135 · Cited by 38
Ngo, D. T., Park, K., Paulino, G. H., & Huang, Y. Y. (2010) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2010.01.007 · Cited by 31
Self-citationPotential-based fracture mechanics using cohesive zone and virtual internal bond modeling
Park, K. (2009) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 30
Self-citation
Cited by
Numerical methods for hydraulic fracture propagation: A review of recent trends
Lecampion, B., Bunger, A., & Zhang, X. (2018) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2017.10.012 · Cited by 467
Wang, K., & Sun, W. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.01.036 · Cited by 335
Javili, A., Morasata, R., Oterkus, E., & Oterkus, S. (2019) · Mathematics and Mechanics of Solids · doi:10.1177/1081286518803411 · Cited by 312
Alsheghri, A. A., & Abu Al-Rub, R. K. (2016) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2016.06.010 · Cited by 37
Thermodynamic-based cohesive zone healing model for self-healing materials
Alsheghri, A. A., & Abu Al-Rub, R. K. (2015) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2015.10.003 · Cited by 31
Metadata
- Authors
- Park, K., & Paulino, G. H.
- Venue
- Applied Mechanics Reviews
- Publisher
- ASME International
- Published
- 2011-11-01
- Volume
- 64
- Issue
- 6
- ISSN
- 0003-6900 (ISSN-L)
- 2379-0407
- OpenAlex
- W2110827087
- Cited by
- 795
- References
- 73
- FWCI
- 10.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.