Microwedge Machining for the Manufacture of Directional Dry Adhesives
The DOI matches its Crossref record; 44 of the 46 references it cites were found in a registry or an index.
Abstract
Directional dry adhesives are inspired by animals such as geckos and are a particularly useful technology for climbing applications. Previously, they have generally been manufactured using photolithographic processes. This paper presents a micromachining process that involves making cuts in a soft material using a sharp, lubricated tool to create closely spaced negative cavities of a desired shape. The machined material becomes a mold into which an elastomer is cast to create the directional adhesive. The trajectory of the tool can be varied to avoid plastic flow of the mold material that may adversely affect adjacent cavities. The relationship between tool trajectory and resulting cavity shape is established through modeling and process characterization experiments. This micromachining process is much less expensive than previous photolithographic processes used to create similar features and allows greater flexibility with respect to the microscale feature geometry, mold size, and mold material. The micromachining process produces controllable, directional adhesives, where the normal adhesion increases with shear loading in a preferred direction. This is verified by multi-axis force testing on a flat glass substrate. Upon application of a post-treatment to decrease the roughness of the engaging surfaces of the features after casting, the adhesives significantly outperform comparable directional adhesives made from a photolithographic mold.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adhesive chosen for this task consists of polydimethylsiloxane (PDMS) slanted microwedges (roughly 100 mm tall), which adhere well to glass and can be repositioned many times without degradation [4,5]”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
In the citing paper
“While other dry adhesive materials produce larger adhesive stresses, PDMS microwedges are especially suitable for climbing because they exhibit controllable adhesion that can be effectively switched on or off in a fraction of a second by applying a shear stress.”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
Citations
Cites
The Mathematical Theory Of Plasticity
Hill, R. (1998) · doi:10.1093/oso/9780198503675.001.0001 · Cited by 7,830
Petry, F. E. (1997) · Kluwer Academic Publishers eBooks · Cited by 2,303
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949 · cited 1×
“Machining processes have been used previously to create stamps for soft lithography [27] and synthetic adhesive structures [11, 28] using nano-indenters and AFM tips, but neither fabrication nor testing of macroscopic adhesive arrays (∼ 1 cm) has been demonstrated and the aspect ratio of the resulting features has bee…”
MethodSpringer Handbook of Nanotechnology
(2010) · Springer Handbooks · doi:10.1007/978-3-642-02525-9 · Cited by 1,473
Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707586 · Cited by 1,318 · cited 1×
“In the second case, the plastic region is restricted to a single shear plane, and elsewhere the material is rigid, in a similar manner to the Merchant model of orthogonal machining [32, 33].”
ResultPrinciples and applications of tribology
(2013) · Choice Reviews Online · doi:10.5860/choice.51-0907 · Cited by 856
Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707596 · Cited by 768 · cited 2×
“…resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to the work surface.”
BackgroundResultCarbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-Off
Qu, L., Dai, L., Stone, M., Xia, Z., & Wang, Z. L. (2008) · Science · doi:10.1126/science.1159503 · Cited by 745 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundSmooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundSelf-citationFrictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651 · cited 2×
“Whether post-treated or not, the micro-machined adhe-sives are controllable because they have the property of frictional adhesion [12]: the adhesion increases as the shear load increases, and the adhesion goes to zero as the shear load is removed because the limit curve goes through the origin.”
BackgroundResultSelf-citation
Research works printed but not linked: 3
- 1941, Chip Formation, Friction and High Quality Machined Surfaces, 299
- 1957, The Use of Paraffin Wax as a Model Material to Simulate the Plastic Deformation of Metals, J. Iron Steel Inst., London, 185, 375
- 1973, Engineering Plasticity
Cited by
A Soft Robotic Gripper With Gecko-Inspired Adhesive
Glick, P., Suresh, S. A., Ruffatto, D., Cutkosky, M., Tolley, M. T., & Parness, A. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792688 · Cited by 381
Self-citationJiang, H., Hawkes, E. W., Fuller, C., Estrada, M. A., Suresh, S. A., Abcouwer, N., Han, A. K., Wang, S., Ploch, C. J., Parness, A., et al. (2017) · Science Robotics · doi:10.1126/scirobotics.aan4545 · Cited by 337
“The microwedge shapes are formed by creating a mold in soft wax and then cast onto a prepared backing, using the process detailed in (46) and (47).”
MethodSelf-citationA Survey on Load Transportation Using Multirotor UAVs
Villa, D. K. D., Brandão, A. S., & Sarcinelli-Filho, M. (2020) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-019-01088-w · Cited by 247
“To adhere into smooth surfaces, the FlyCroTugs uses a square 25-by-25 mm 2 pad of directional gecko-like dry adhesives [85], capable of generating shear forces up to 45 N in that surfaces.”
MethodEngineering Micropatterned Dry Adhesives: From Contact Theory to Handling Applications
Hensel, R., Moh, K., & Arzt, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800865 · Cited by 195
From grasping to manipulation with gecko-inspired adhesives on a multifinger gripper
Ruotolo, W., Brouwer, D., & Cutkosky, M. R. (2021) · Science Robotics · doi:10.1126/scirobotics.abi9773 · Cited by 162
“2 of 13 The adhesives used for testing consist of a directional, microwedge design as presented in (21)—but our purpose is to address the hand design considerations necessary for efficient use of any directional adhesive, independent of the material properties and force limits of that particular implementation.”
MethodSelf-citationTao, D., Gao, X. Q., Lu, H., Liu, Z., Li, Y., Tong, H., Pesika, N. S., Meng, Y., & Tian, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606576 · Cited by 151
Angle-selective thermal emitter for directional radiative cooling and heating
Zhou, J., Chen, T. G., Tsurimaki, Y., Hajj‐Ahmad, A., Fan, L., Peng, Y., Xu, R., Wu, Y., Assawaworrarit, S., Fan, S., et al. (2023) · Joule · doi:10.1016/j.joule.2023.10.013 · Cited by 151
Self-citationHao, Y., Biswas, S., Hawkes, E. W., Wang, T., Zhu, M., Wen, L., & Visell, Y. (2020) · IEEE Transactions on Robotics · doi:10.1109/tro.2020.3021427 · Cited by 145
“machined mold with a patterned texture [43], onto the wall of the shaft mold [see Fig.”
BackgroundHuman climbing with efficiently scaled gecko-inspired dry adhesives
Hawkes, E. W., Eason, E. V., Christensen, D. L., & Cutkosky, M. R. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0675 · Cited by 120
“The adhesive chosen for this task consists of polydimethylsiloxane (PDMS) slanted microwedges (roughly 100 mm tall), which adhere well to glass and can be repositioned many times without degradation [4,5] (figure 1, inset).”
BackgroundSelf-citationGecko-Like Dry Adhesive Surfaces and Their Applications: A Review
Wang, W., Liu, Y., & Xie, Z. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-00088-7 · Cited by 121
“The research also confirmed that the inclined wedge-shaped microstructures fabricated by the polydimethylsiloxane have both the anisotropic and controllable adhesive characteristic, and its corresponding adhesive strength has also been significantly improved [79].”
BackgroundMethodGrasping without squeezing: Shear adhesion gripper with fibrillar thin film
Hawkes, E. W., Christensen, D. L., Han, A. K., Jiang, H., & Cutkosky, M. R. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139505 · Cited by 104
“The adhesive is polydimethylsiloxane (PDMS) microwedges [15], which have a property known as controllability .”
BackgroundSelf-citation3D Printing of Robotic Soft Grippers: Toward Smart Actuation and Sensing
Goh, G. D., Goh, G. L., Lyu, Z., Ariffin, M. Z., Yeong, W. Y., Lum, G. Z., Campolo, D., Han, B. S., & Wong, H. Y. A. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101672 · Cited by 97
Recent developments in gecko-inspired dry adhesive surfaces from fabrication to application
Li, X., Tao, D., Lu, H., Bai, P., Liu, Z., Ma, L., Meng, Y., & Tian, Y. (2019) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/ab1447 · Cited by 100
Grasping Without Squeezing: Design and Modeling of Shear-Activated Grippers
Hawkes, E. W., Jiang, H., Christensen, D. L., Han, A. K., & Cutkosky, M. R. (2017) · IEEE Transactions on Robotics · doi:10.1109/tro.2017.2776312 · Cited by 86
Self-citationThree-dimensional dynamic surface grasping with dry adhesion
Hawkes, E. W., Jiang, H., & Cutkosky, M. R. (2015) · The International Journal of Robotics Research · doi:10.1177/0278364915584645 · Cited by 95
“The dry adhesive used here is polydimethosiloxane (PDMS) microwedges (Day et al., 2013; Parness et al., 2009) (Figure 3), which has the characteristic of controllability, or the ability to engage more fully with the surface when loaded in shear, and to disengage with the surface spontaneously when unloaded.”
MethodSelf-citationInversion of friction anisotropy in a bio-inspired asymmetrically structured surface
Tramsen, H. T., Gorb, S. N., Zhang, H., Manoonpong, P., Dai, Z., & Heepe, L. (2018) · Journal of The Royal Society Interface · doi:10.1098/rsif.2017.0629 · Cited by 80
Dynamic surface grasping with directional adhesion
Hawkes, E. W., Christensen, D. L., Eason, E. V., Estrada, M. A., Heverly, M., Hilgemann, E. W., Jiang, H., Pope, M. T., Parness, A. J., & Cutkosky, M. R. (2013) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2013.6697151 · Cited by 82
“them into uncured PDMS and then pressing them against a wafer [9], causing a change in shape and surface smoothness on the engaging surfaces.”
BackgroundMethodSelf-citationEisenhaure, J. D., & Kim, S. (2017) · Micromachines · doi:10.3390/mi8040125 · Cited by 83
“A micromachining process to produce a mold with similar wedge features has been demonstrated, where a wedge indentor cuts the features into the mold’s surface [140].”
MethodForceful manipulation with micro air vehicles
Estrada, M. A., Mintchev, S., Christensen, D. L., Cutkosky, M. R., & Floreano, D. (2018) · Science Robotics · doi:10.1126/scirobotics.aau6903 · Cited by 74
“Adhesion For attaching to smooth surfaces, the robots used a square 25 mm– by–25 mm pad of directional adhesive (17), capable of generating 45 N of shear force.”
BackgroundMethodSelf-citationCapacitive Sensing for a Gripper With Gecko-Inspired Adhesive Film
Hashizume, J., Huh, T. M., Suresh, S. A., & Cutkosky, M. R. (2019) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2019.2893154 · Cited by 66
“The design and fabrication process for creating films with these wedges is covered in detail in [19], [20].”
MethodSelf-citationDuan, W., Yu, Z., Cui, W., Zhang, Z., Zhang, W., & Tian, Y. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.102862 · Cited by 63
Rapid Manufacturing of Mechanoreceptive Skins for Slip Detection in Robotic Grasping
Charalambides, A., & Bergbreiter, S. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600188 · Cited by 59
Scaling controllable adhesives to grapple floating objects in space
Jiang, H., Hawkes, E. W., Arutyunov, V., Tims, J., Fuller, C. L., King, J. P., Seubert, C. R., Chang, H. L., Parness, A. J., & Cutkosky, M. R. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139584 · Cited by 68
“5cm tiles with geckoinspired directional (controllable) microwedge adhesive [21] oriented in opposite directions, as shown in Fig.”
Self-citationOrbital debris removal using micropatterned dry adhesives: Review and recent advances
Ben‐Larbi, M. K., Hensel, R., Atzeni, G., Arzt, E., & Stoll, E. (2022) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2022.100850 · Cited by 64
Surface and Shape Deposition Manufacturing for the Fabrication of a Curved Surface Gripper
Suresh, S. A., Christensen, D. L., Hawkes, E. W., & Cutkosky, M. R. (2015) · Journal of Mechanisms and Robotics · doi:10.1115/1.4029492 · Cited by 54
Self-citationRobust scalable reversible strong adhesion by gecko-inspired composite design
Li, X., Bai, P., Li, X., Li, L., Li, Y., Lu, H., Ma, L., Meng, Y., & Tian, Y. (2021) · Friction · doi:10.1007/s40544-021-0522-4 · Cited by 58
Improving Industrial Grippers With Adhesion-Controlled Friction
Roberge, J.-P., Ruotolo, W., Duchaine, V., & Cutkosky, M. R. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2794618 · Cited by 51
“As noted earlier, the adhesive used in these experiments is the same as described in [18], [19] and consists of rows of inclined “micro-wedges” with a triangular cross section.”
MethodSelf-citationμTugs: Enabling microrobots to deliver macro forces with controllable adhesives
Christensen, D. L., Hawkes, E. W., Suresh, S. A., Ladenheim, K., & Cutkosky, M. R. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139765 · Cited by 57
“Force Generation The dry adhesives used for this work [14,15] generate adhesion using van der Waals interactions [16] at densely arrayed contact sites.”
MethodSelf-citationClimbing with adhesion: from bioinspiration to biounderstanding
Cutkosky, M. R. (2015) · Interface Focus · doi:10.1098/rsfs.2015.0015 · Cited by 53
Self-citationFree-flyer acquisition of spinning objects with gecko-inspired adhesives
Estrada, M. A., Hockman, B. J., Bylard, A., Hawkes, E. W., Cutkosky, M. R., & Pavone, M. (2016) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2016.7487696 · Cited by 45
“The adhesives used within these experiments were fabricated using a PDMS silicone elastomer using microwedge machining [24].”
MethodSelf-citationVertical dry adhesive climbing with a 100× bodyweight payload
Hawkes, E. W., Christensen, D. L., & Cutkosky, M. R. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139722 · Cited by 64
“The adhesive is Poly(dimethylsiloxane), or PDMS, microwedges [18].”
BackgroundSelf-citationMaking Contact: A Review of Robotic Attachment Mechanisms for Extraterrestrial Applications
Spenko, M. J. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100063 · Cited by 44
Kim, J., Krishna‐Subbaiah, N., Wu, Y., Ko, J., Shiva, A., & Sitti, M. (2022) · Advanced Materials · doi:10.1002/adma.202207257 · Cited by 39
Gecko-Inspired Controllable Adhesive: Structure, Fabrication, and Application
Liu, Y., Wang, H., Li, J., Li, P., & Li, S. (2024) · Biomimetics · doi:10.3390/biomimetics9030149 · Cited by 48
Switchable adhesion of gecko-inspired hierarchically wedge-mushroom-shaped surface
Shen, C., Cheng, Y., Peng, Z., & Chen, S. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150900 · Cited by 43
Bio-inspired mechanisms for inclined locomotion in a legged insect-scale robot
Seitz, B. F., Goldberg, B., Doshi, N., Özcan, O., Christensen, D. L., Hawkes, E. W., Cutkosky, M. R., & Wood, R. J. (2014) · IEEE International Conference on Robotics and Biomimetics (ROBIO) · doi:10.1109/robio.2014.7090428 · Cited by 36
“By orienting the features in a single direction, a predetermined attachment and detachment direction can be chosen [12].”
BackgroundMethodSelf-citationGwon, M., Park, G., Hong, D., Park, Y.-J., Han, S., Kang, D., & Koh, J. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-021-00368-x · Cited by 36
Perching and vertical climbing: Design of a multimodal robot
Estrada, M. A., Hawkes, E. W., Christensen, D. L., & Cutkosky, M. R. (2014) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2014.6907472 · Cited by 35
“Directional adhesives with a lower pull-off pressure [16] are possible and would be preferable.”
BackgroundSelf-citationAnalysis and Measurement of Adhesive Behavior for Gecko‐Inspired Synthetic Microwedge Structure
Chu, Z., Wang, C., Xiao, H., Deng, J., Cui, J. H., & Sun, L. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900283 · Cited by 30
Zhou, T., Ruan, B., Che, J., Li, H., Chen, X., & Jiang, Z. (2021) · ACS Omega · doi:10.1021/acsomega.0c05804 · Cited by 29
Kim, J., & Varenberg, M. (2017) · Journal of The Royal Society Interface · doi:10.1098/rsif.2017.0832 · Cited by 27
Contact splitting in dry adhesion and friction: reducing the influence of roughness
Kim, J., & Varenberg, M. (2019) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.10.1 · Cited by 27
Simaite, A., Temple, B., Karimi, M. A., Alizadehyazdi, V., & Spenko, M. J. (2018) · Journal of The Royal Society Interface · doi:10.1098/rsif.2018.0551 · Cited by 25
Three-Dimensional Soft Material Micropatterning via Direct Laser Lithography of Flexible Molds
Bernardeschi, I., Tricinci, O., Mattoli, V., Filippeschi, C., Mazzolai, B., & Beccai, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08872 · Cited by 24
Hybrid electrostatic and gecko-inspired gripping pads for manipulating bulky, non-smooth items
Han, A. K., Hajj‐Ahmad, A., & Cutkosky, M. R. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/abca51 · Cited by 23
“Fabrication process: (a) prepare a gecko-inspired adhesive mold [14]; (b) spray PDMS thinned with Hexane; (c) allow PDMS to cure; (d) spray CCTO doped silicone rubber for the second layer of bimaterial wedges (e); (f ) roll the electroadhesive pad onto the mold.”
BackgroundMethodResultSelf-citationAdhesion Circle: A New Approach To Better Characterize Directional Gecko-Inspired Dry Adhesives
Wang, Y., Lehmann, S., Shao, J., & Sameoto, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11708 · Cited by 24
Forcing the issue: testing gecko-inspired adhesives
Suresh, S. A., Hajj‐Ahmad, A., Hawkes, E. W., & Cutkosky, M. R. (2021) · Journal of The Royal Society Interface · doi:10.1098/rsif.2020.0730 · Cited by 22
“We assume that the characteristic length scale for motion of the adhesive microstructures is 100 μm, which corresponds to the approximate fibril length used in a variety of adhesives [8,41,49].”
BackgroundMethodInfluentialSelf-citationSpatially variant microstructured adhesive with one-way friction
Suresh, S. A., Kerst, C. F., Cutkosky, M. R., & Hawkes, E. W. (2019) · Journal of The Royal Society Interface · doi:10.1098/rsif.2018.0705 · Cited by 24
Self-citationLiu, J., Yao, Y., Chen, S., Li, X., & Zhang, Z. (2023) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2023.2168783 · Cited by 19
Tunable friction through constrained inflation of an elastomeric membrane
Becker, K. P., Bartlett, N. W., Malley, M. J. D., Kjeer, P., & Wood, R. J. (2017) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2017.7989502 · Cited by 19
“Others have examined fabrication techniques to make devices that enable directional friction [5].”
BackgroundTactile sensing for gecko-inspired adhesion
Wu, X. A., Suresh, S. A., Jiang, H., Ulmen, J. V., Hawkes, E. W., Christensen, D. L., & Cutkosky, M. R. (2015) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2015.7353566 · Cited by 21
“As a result, efficacy of an adhesive pad is also dependent upon the roughness, flatness and cleanliness of the surface on which they are applied [29].”
BackgroundSelf-citationLoad Sharing Design of a Multi-legged Adaptable Gripper With Gecko-Inspired Controllable Adhesion
Li, X., Li, X., Li, L., Meng, Y., & Tian, Y. (2021) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2021.3107603 · Cited by 20
An Electrostatically Actuated Gecko Adhesive Clutch
Hajj‐Ahmad, A., Han, A. K., Lin, M. A., Glover, G. H., & Cutkosky, M. R. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202202025 · Cited by 18
Self-citationWings of a Feather Stick Together: Morphing Wings with Barbule-Inspired Latching
Wissa, A. A., Han, A. K., & Cutkosky, M. R. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-22979-9_13 · Cited by 17
Self-citationLow-Cost, Continuously Variable, Strain Wave Transmission Using Gecko-Inspired Adhesives
Naclerio, N. D., Kerst, C. F., Haggerty, D. A., Suresh, S. A., Singh, S., Ogawa, K., Miyazaki, S., Cutkosky, M. R., & Hawkes, E. W. (2019) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2019.2893424 · Cited by 18
“The dry adhesive was cast in silicone (Dragon Skin 30, Smooth-On), using a micromachined mold as in [18].”
MethodSelf-citationCalais, T., & y Alvarado, P. V. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/ab4f9d · Cited by 18
Wang, W., & Xie, Z. (2021) · Science China Technological Sciences · doi:10.1007/s11431-020-1801-9 · Cited by 16
Creating Metal Molds for Directional Gecko-Inspired Adhesives
Kerst, C. F., Suresh, S. A., & Cutkosky, M. R. (2019) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4045764 · Cited by 14
Self-citationTrumpet-shaped controllable adhesive structure for manipulation of millimeter-sized objects
Li, X., Li, X., Li, L., Sun, T., Meng, Y., & Tian, Y. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac262f · Cited by 15
Bimanual Handling of Deformable Objects With Hybrid Adhesion
Han, A. K., Hajj‐Ahmad, A., & Cutkosky, M. R. (2022) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2022.3158231 · Cited by 14
Self-citationZeng, X., Wu, Y., Han, S., Liu, Y., Xiu, H., Tian, F., & Ren, L. (2021) · Micromachines · doi:10.3390/mi12121577 · Cited by 13
“offered more proof that the spikes could lead to asymmetric friction [17].”
Incipient Slip Detection and Recovery for Controllable Gecko-Inspired Adhesion
Wu, X. A., Christensen, D. L., Suresh, S. A., Jiang, H., Roderick, W. R. T., & Cutkosky, M. R. (2016) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2016.2636881 · Cited by 13
“When the shear force is relaxed, the micro-wedges return to their upright configuration, the contact area becomes very small and adhesion returns nearly to zero [31].”
Self-citationA microstructured adhesive gripper with piezoelectric controlled adhesion, cleaning, and sensing
Alizadehyazdi, V., & Spenko, M. J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab46fc · Cited by 14
Design and Development of a Gecko-Adhesive Gripper for the Astrobee Free-Flying RobotPreprint
Cauligi, A., Chen, T. G., Suresh, S. A., Dille, M. N., Ruiz, R. G., Vargas, A. M., Pavone, M., & Cutkosky, M. R. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2009.09151 · Cited by 12
“Under optimal conditions when the grasp surface is perfectly smooth, flat, and clean, the maximum normal adhesive force is no greater than 20 N for one pair of the adhesives [17].”
BackgroundSelf-citationGRASP: Grocery Robot's Adhesion and Suction Picker
Hajj‐Ahmad, A., Kaul, L., Matl, C., & Cutkosky, M. R. (2023) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2023.3300572 · Cited by 13
“are manufactured from a micromachined mold, as described in [19], [20].”
BackgroundMethodSelf-citationHu, Z., Chu, Z., Chen, G., & Cui, J. H. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3300702 · Cited by 11
Demirjian, W. A., Powelson, M. W., & Canfield, S. L. (2019) · Journal of Mechanisms and Robotics · doi:10.1115/1.4045672 · Cited by 11
Kim, Y., Yeo, J., Park, K., Destree, A. P., Zhao Qin, A., & Ryu, S. (2023) · Mechanics of Materials · doi:10.1016/j.mechmat.2023.104778 · Cited by 11
Jiang, Z., Shen, M., Ma, Y., Che, J., & Li, H. (2023) · Science China Technological Sciences · doi:10.1007/s11431-022-2176-4 · Cited by 10
Manufacturing Approaches and Applications for Bioinspired Dry Adhesives: A Path to Commercialization
Sameoto, D. (2017) · Biologically-inspired systems · doi:10.1007/978-3-319-59114-8_11 · Cited by 11
Active Sensing for Measuring Contact of Thin Film Gecko-Inspired Adhesives
Huh, T. M., Liu, C., Hashizume, J., Chen, T. G., Suresh, S. A., Chang, F., & Cutkosky, M. R. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2851757 · Cited by 13
Self-citationRecent Progress on the Use of Stimulus-Responsive Materials for Dry Adhesive Applications
Hassani, H. T. M., & Baji, A. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00504 · Cited by 13
Development of an electro-adhesive micro pillar array via EHD patterning
Itoh, K., Ishida, M., Kakinuma, Y., Anzai, H., & Sakirai, K. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/aafeb8 · Cited by 9
Compression Molding and Nickel Molds for Directional Gecko-Inspired Adhesives
Kerst, C. F., & Cutkosky, M. R. (2021) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4051139 · Cited by 8
Self-citationChen, G., Wu, J., Zhang, Z., Zhang, B., Chu, Z., & Cui, J. H. (2024) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2024.3414248 · Cited by 7
Simple models of viscoelastic fibrillar adhesion to a rigid sphere
Liang, X., Wang, G.-F., & Ciavarella, M. (2025) · Extreme Mechanics Letters · doi:10.1016/j.eml.2025.102316 · Cited by 6
Design of Track-Based Climbing Robots Using Dry Adhesives
Powelson, M. W., & Canfield, S. L. (2017) · doi:10.1115/detc2017-67999 · Cited by 6
“While some adhesives have been developed such that increased shear loads, τ, allow for higher normal loads to be applied [12] [13], the most common dependence is that of the maximum normal adhesion pressure, wA, to the normal preloading pressure, wP – i.”
BackgroundRole of structural stiffness on the loading capacity of fibrillar adhesive composite
Li, X., Pesika, N. S., Li, L., Li, X., Li, Y., Bai, P., Meng, Y., & Tian, Y. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101001 · Cited by 6
Simaite, A., Karimi, M. A., & Spenko, M. J. (2019) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ab1dca · Cited by 6
From strong to switchable adhesion: Gecko-inspired design strategies and practical applications
Shen, C., Heng, W., Wu, C., Hou, X., Fan, Y., Li, Y., Han, Y., Yang, Q., Wang, L., Peng, Z., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174049 · Cited by 4
Biomimetic wall-shaped hierarchical micro-structure: numerical simulation of sliding inception
Kligerman, Y., Breitman, P., & Varenberg, M. (2020) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/ab8ba3 · Cited by 5
“To address the manufacturing difficulties, simplified microstructure shapes such as wedge [13, 15, 17] and flap [12, 14], as well as advanced micromachining techniques to”
MethodScalable Fabrication of Bioinspired Controllable Dry Adhesive by Roll‐to‐Roll Slitting
Pang, C., Mak, K., Tse, Y. A., Yu, H., & Wang, M. Y. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200377 · Cited by 5
Cutting to the Point: Directly Machined Metal Molds for Directional Gecko-Inspired Adhesives
Hajj‐Ahmad, A., Suresh, S. A., & Cutkosky, M. R. (2021) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4051406 · Cited by 5
Self-citationFEM and Analytical Modeling of the Incipient Chip Formation for the Generation of Micro-Features
Lanzetta, M., Gharibi, A., Scardaoni, M. P., & Vivaldi, C. (2021) · Materials · doi:10.3390/ma14143789 · Cited by 5
“In most cases, the fabrication of these surfaces begins with lithographic patterning or direct micromachining of a material such as SU-8 [6], wax [7], or silicon to create a mold, which is used to cast the functional material.”
BackgroundMethodCharacterization of Dry Adhesives Fabricated Using a Novel Mass Production Manufacturing Technique
Krahn, J. M., & Menon, C. (2013) · Macromolecular Reaction Engineering · doi:10.1002/mren.201300111 · Cited by 5
A novel methodology for intrinsic adhesion state sensing in gecko-inspired directional dry adhesives
Chen, G., Zhang, Z., Wu, J., Zhang, B., Chu, Z., & Cui, J. H. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115492 · Cited by 6
Fast stiffness variation gripper with efficient adhesion control
Chen, W., Sun, T., Li, J., Li, X., Li, L., Meng, Y., & Tian, Y. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad5a59 · Cited by 6
“The mold of mushroom-shaped micropillars used in experiments were manufactured through double-side lithography and molding [18].”
High-speed airflow influence on adhesion performance of fibrillar adhesive
Chen, W., Sun, T., Li, J., Li, X., Li, X., Meng, Y., & Tian, Y. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad8386 · Cited by 4
PEDOT:PSS Coating Improves Gecko-Inspired Adhesive Performance
Kerst, C. F., Suresh, S. A., Ferro, M. D., & Cutkosky, M. R. (2020) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4048927 · Cited by 3
Self-citationZiemer, L., Garzke, M., Hand, A., Ben‐Larbi, M. K., Stoll, E., & Tighe, A. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108866 · Cited by 4
Scalable Gecko‐Inspired Adhesives via Diffraction‐Grated Molds: A Low‐Cost, Directional PDMS System
Hassan, M., Mahajan, A., Gao, X., Quinn, D. D., & Farhad, S. (2025) · Engineering Reports · doi:10.1002/eng2.70352 · Cited by 5
“Meanwhile, wedge-shaped microstructures, fabricated via etching or micromachining, optimize shear adhesion by leveraging directional loading, closely mirroring the biomechanics of gecko setae [30, 31].”
Zhou, J., Shu, J., Pan, T., Zhu, P., An, J., Zhang, H., Huang, J., Kaur, U., Ma, X., & Tomizuka, M. (2025) · Soft Robotics · doi:10.1177/21695172251400144 · Cited by 5
“These mechanisms include vacuum suction, 28 – 30 dry adhesion inspired by gecko setae, 31,32 wet adhesion for moist or underwater surfaces, 33,34 electroadhesion via electrostatic attraction, 35,36 and hybrid strategies that combine these principles.”
Nagahama, S., Nakao, A., & Sugano, S. (2022) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros47612.2022.9981232 · Cited by 2
“Mushroom-shaped [12][13] and wedge-shaped [14][15] surface microstructures have been frequently applied to robotics and other fields.”
BackgroundManipulating Adaptive Analysis and Performance Test of a Negative-Pressure Actuated Adhesive Gripper
Su, J., Liu, H., Cui, J. H., & Chu, Z. (2023) · Communications in computer and information science · doi:10.1007/978-981-99-0617-8_4 · Cited by 2
Switchable adhesion for wafer-handling based on dielectric elastomer stack transducers
Grotepaß, T., Butz, J., Förster-Zügel, F., & Schlaak, H. F. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2220771 · Cited by 2
“Spike or cone Silicone casted in a mold made of wax or metal [2], [7], [8]”
BackgroundWang, W., Liu, Y., & Xie, Z. (2022) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/ac5e80 · Cited by 2
“The reason why this study does not present its saturation point is that we aim to explore its dependence on the preloading depth in the safe adhesive region of the wedge-shaped microstructures [15, 16].”
BackgroundMa, J., Peng, J., Qin, A., Yuan, K., Zhu, W., Ma, Y., Li, C., & Chen, X. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115291 · Cited by 1
Amplification factor in shear-activated adhesives: effect of elasticity
Kim, J., & Varenberg, M. (2021) · Soft Matter · doi:10.1039/d1sm00760b · Cited by 1
Gentle Grasping With Gecko-Inspired Adhesives in Extreme Environments
Rennich, E., Ren, T.-A., Kim, J., Di, J., Chen, T. G., & Cutkosky, M. R. (2025) · IEEE transactions on field robotics. · doi:10.1109/tfr.2025.3613276 · Cited by 2
“Anisotropic adhesives can undergo thousands of loading cycles with minimal degradation [9], [10] and generally require a much smaller normal preload pressure to adhere.”
Self-citationFuertes, J. E. C., & Albán, Ó. A. V. (2022) · Ingenieria Solidaria · doi:10.16925/2357-6014.2022.03.11 · Cited by 1
Metadata
- Authors
- Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M.
- Affiliations
- Los Alamos National Laboratory (US)
- Stanford University (US)
- e-mail:
- Corresponding author
- Day, Paul
- Eason, Eric V.
- Christensen, David
- Cutkosky, Mark
- ORCID
- Cutkosky, Mark
- Venue
- Journal of Micro and Nano-Manufacturing
- Publisher
- ASME International
- Published
- 2013-03-01
- Volume
- 1
- Issue
- 1
- ISSN
- 2166-0468 (ISSN-L)
- 2166-0476
- OpenAlex
- W2125778968
- Cited by
- 112
- References
- 46
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 7 · 2023: 10 · 2022: 9 · 2021: 17 · 2020: 7 · 2019: 13 · 2018: 7 · 2017: 9 · 2016: 6 · 2015: 9 · 2014: 4 · 2013: 4
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Micro and Nano-Manufacturing (publishedVersion)
- Funders
- National Science Foundation
- Hertz Foundation
- Defense Advanced Research Projects Agency
- Los Alamos National Laboratory
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Keywords
- micromachining, mold making, cavity geometry, tool trajectory, gecko-inspired adhesion, shear adhesion, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.