Microwedge Machining for the Manufacture of Directional Dry Adhesives
The DOI matches its Crossref record; 44 of the 46 references it cites were found in a registry or an index.
Abstract
Directional dry adhesives are inspired by animals such as geckos and are a particularly useful technology for climbing applications. Previously, they have generally been manufactured using photolithographic processes. This paper presents a micromachining process that involves making cuts in a soft material using a sharp, lubricated tool to create closely spaced negative cavities of a desired shape. The machined material becomes a mold into which an elastomer is cast to create the directional adhesive. The trajectory of the tool can be varied to avoid plastic flow of the mold material that may adversely affect adjacent cavities. The relationship between tool trajectory and resulting cavity shape is established through modeling and process characterization experiments. This micromachining process is much less expensive than previous photolithographic processes used to create similar features and allows greater flexibility with respect to the microscale feature geometry, mold size, and mold material. The micromachining process produces controllable, directional adhesives, where the normal adhesion increases with shear loading in a preferred direction. This is verified by multi-axis force testing on a flat glass substrate. Upon application of a post-treatment to decrease the roughness of the engaging surfaces of the features after casting, the adhesives significantly outperform comparable directional adhesives made from a photolithographic mold.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adhesive chosen for this task consists of polydimethylsiloxane (PDMS) slanted microwedges (roughly 100 mm tall), which adhere well to glass and can be repositioned many times without degradation [4,5]”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
In the citing paper
“While other dry adhesive materials produce larger adhesive stresses, PDMS microwedges are especially suitable for climbing because they exhibit controllable adhesion that can be effectively switched on or off in a fraction of a second by applying a shear stress.”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
Citations
Cites
The Mathematical Theory Of Plasticity
Hill, R. (1998) · doi:10.1093/oso/9780198503675.001.0001 · Cited by 7,830
Petry, F. E. (1997) · Kluwer Academic Publishers eBooks · Cited by 2,303
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949 · cited 1×
“Machining processes have been used previously to create stamps for soft lithography [27] and synthetic adhesive structures [11, 28] using nano-indenters and AFM tips, but neither fabrication nor testing of macroscopic adhesive arrays (∼ 1 cm) has been demonstrated and the aspect ratio of the resulting features has bee…”
MethodSpringer Handbook of Nanotechnology
(2010) · Springer Handbooks · doi:10.1007/978-3-642-02525-9 · Cited by 1,473
Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707586 · Cited by 1,318 · cited 1×
“In the second case, the plastic region is restricted to a single shear plane, and elsewhere the material is rigid, in a similar manner to the Merchant model of orthogonal machining [32, 33].”
ResultPrinciples and applications of tribology
(2013) · Choice Reviews Online · doi:10.5860/choice.51-0907 · Cited by 856
Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707596 · Cited by 768 · cited 2×
“…resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to the work surface.”
BackgroundResultCarbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-Off
Qu, L., Dai, L., Stone, M., Xia, Z., & Wang, Z. L. (2008) · Science · doi:10.1126/science.1159503 · Cited by 745 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundSmooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundSelf-citationFrictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651 · cited 2×
“Whether post-treated or not, the micro-machined adhe-sives are controllable because they have the property of frictional adhesion [12]: the adhesion increases as the shear load increases, and the adhesion goes to zero as the shear load is removed because the limit curve goes through the origin.”
BackgroundResultSelf-citationA nontransferring dry adhesive with hierarchical polymer nanohairs
Jeong, H. E., Lee, J.-K., Kim, H. N., Moon, S. H., & Suh, K. Y. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900323106 · Cited by 558
Synthetic gecko foot-hair micro/nano-structures as dry adhesives
Sitti, M., & Fearing, R. S. (2003) · Journal of Adhesion Science and Technology · doi:10.1163/156856103322113788 · Cited by 494 · cited 2×
“Machining processes have been used previously to create stamps for soft lithography [27] and synthetic adhesive structures [11, 28] using nano-indenters and AFM tips, but neither fabrication nor testing of macroscopic adhesive arrays ( ∼ 1 cm 2 ) has been demonstrated and the aspect ratio of the…”
BackgroundMethodContact Shape Controls Adhesion of Bioinspired Fibrillar Surfaces
del Campo, A., Greiner, C., & Arzt, E. (2007) · Langmuir · doi:10.1021/la7010502 · Cited by 465
Gecko‐Inspired Directional and Controllable Adhesion
Murphy, M. P., Aksak, B., & Sitti, M. (2009) · Small · doi:10.1002/smll.200801161 · Cited by 463 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundParness, A., Soto, D., Esparza, N., Gravish, N., Wilkinson, M., Autumn, K., & Cutkosky, M. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0048 · Cited by 277 · cited 3×
“Among the adhesives that have been applied to climbing robots, micro-wedges [18] are simple and durable structures that have enabled kilogram-scale robots to climb on glass, plastic, wood pan-eling, painted metal, and similar surfaces.”
BackgroundMethodInfluentialSelf-citationWaalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives
Murphy, M. P., & Sitti, M. (2007) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2007.897277 · Cited by 263 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundWaalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M. (2011) · The International Journal of Robotics Research · doi:10.1177/0278364910382862 · Cited by 247 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundThe theory of wedge indentation of ductile materials
Hill, R., Lee, E. H., & Tupper, S. J. (1947) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1947.0009 · Cited by 242 · cited 1×
“The process bears resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to…”
BackgroundA Gecko‐Inspired Reversible Adhesive
Northen, M. T., Greiner, C., Arzt, E., & Turner, K. L. (2008) · Advanced Materials · doi:10.1002/adma.200801340 · Cited by 221 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundDirectional adhesion of gecko-inspired angled microfiber arrays
Lee, J., Fearing, R. S., & Komvopoulos, K. (2008) · Applied Physics Letters · doi:10.1063/1.3006334 · Cited by 172
Stretchable, Adhesion-Tunable Dry Adhesive by Surface Wrinkling
Jeong, H. E., Kwak, M. K., & Suh, K. Y. (2010) · Langmuir · doi:10.1021/la904290g · Cited by 163 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundGecko‐Inspired Dry Adhesive for Robotic Applications
Yu, J., Chary, S., Das, S., Tamelier, J., Pesika, N. S., Turner, K. L., & Israelachvili, J. N. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100493 · Cited by 158 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundRecent advances in the fabrication and adhesion testing of biomimetic dry adhesives
Sameoto, D., & Menon, C. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/10/103001 · Cited by 157 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundDirectional adhesion for climbing: theoretical and practical considerations
Santos, D., Spenko, M., Parness, A., Kim, S., & Cutkosky, M. (2007) · Journal of Adhesion Science and Technology · doi:10.1163/156856107782328399 · Cited by 145 · cited 2×
“To obtain the adhesion limit curve [47], a battery of load-pull tests were performed for preload depths ranging from 30–80 μm and pull-off angles ranging from 0–90°.”
MethodSelf-citationThe indentation of materials by wedges
Hirst, W., & Howse, M. G. J. W. (1969) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1969.0126 · Cited by 119 · cited 1×
“As noted by Hirst and Howse [43], rigid-plastic behavior is most likely to occur in indenting processes if the included angle of the tool is acute and the ratio of Young’s modulus to yield stress E/Y is large.”
BackgroundDesign and Fabrication of Gecko-Inspired Adhesives
Jin, K., Tian, Y., Erickson, J. S., Puthoff, J. B., Autumn, K., & Pesika, N. S. (2012) · Langmuir · doi:10.1021/la204040p · Cited by 116 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundThe Gecko’s Toe: Scaling Directional Adhesives for Climbing Applications
Hawkes, E. W., Eason, E. V., Asbeck, A. T., & Cutkosky, M. R. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2012.2209672 · Cited by 112 · cited 1×
“For climbing applications [7], the sheet of glass may be replaced by a rigid tile made of glass fiber or aluminum.”
BackgroundSelf-citationCritical factors in SEM 3D stereo microscopy
Marinello, F., Bariani, P. F., Savio, E., Horsewell, A., & Chiffre, L. D. (2008) · Measurement Science and Technology · doi:10.1088/0957-0233/19/6/065705 · Cited by 112 · cited 1×
“This measurement technique can be sensitive to a number of types of calibration and numerical errors, however [44].”
Bio-inspired slanted polymer nanohairs for anisotropic wetting and directional dry adhesion
Kwak, M. K., Jeong, H.-E., Kim, T.-I., Yoon, H., & Suh, K. Y. (2010) · Soft Matter · doi:10.1039/b924056j · Cited by 109 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundMini-Whegs TM Climbs Steep Surfaces Using Insect-inspired Attachment Mechanisms
Daltorio, K. A., Wei, T. E., Horchler, A. D., Southard, L., Wile, G. D., Quinn, R. D., Gorb, S. N., & Ritzmann, R. E. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364908095334 · Cited by 108 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundPlane-Strain Slip-Line Fields for Metal-Deformation Processes
Johnson, W., Sowerby, R., Venter, R. D., & Kobayashi, S. (1983) · Journal of Applied Mechanics · doi:10.1115/1.3167124 · Cited by 101 · cited 1×
“As noted by Johnson et al. [34], some of the proposed solutions for wedge indenting and orthogonal machining show similarities.”
BackgroundAbigaille II: toward the development of a spider-inspired climbing robot
Li, Y., Ahmed, A. H., Sameoto, D., & Menon, C. (2011) · Robotica · doi:10.1017/s0263574711000373 · Cited by 90 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundSameoto, D., & Menon, C. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/11/115026 · Cited by 71 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundMicro- and Nanopatterning of Inorganic and Polymeric Substrates by Indentation Lithography
Gong, J., Lipomi, D. J., Deng, J., Nie, Z., Chen, X., Randall, N. X., Nair, R. P., & Whitesides, G. M. (2010) · Nano Letters · doi:10.1021/nl101675s · Cited by 70 · cited 1×
“Machining processes have been used previously to create stamps for soft lithography [27] and synthetic adhesive structures [11, 28] using nano-indenters and AFM tips, but neither fabrication nor testing of macroscopic adhesive arrays ( ∼ 1 cm 2 ) has been demonstrated and the aspect ratio of the…”
MethodA tailless timing belt climbing platform utilizing dry adhesives with mushroom caps
Krahn, J., Liu, Y., Sadeghi, A., & Menon, C. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/11/115021 · Cited by 67 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundMolinari, A., & Moufki, A. (2007) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2007.07.015 · Cited by 62 · cited 1×
“Furthermore, there is doubt about the theoretical and experimental validity of this argument [40–42].”
BackgroundShear Adhesion Strength of Thermoplastic Gecko-Inspired Synthetic Adhesive Exceeds Material Limits
Gillies, A. G., & Fearing, R. S. (2011) · Langmuir · doi:10.1021/la202085j · Cited by 58
Childs, T. H. C., & Rowe, G. W. (1973) · Reports on Progress in Physics · doi:10.1088/0034-4885/36/3/001 · Cited by 55 · cited 1×
“Furthermore, there is doubt about the theoretical and experimental validity of this argument [40–42].”
BackgroundAn investigation of the deformation in orthogonal cutting
Bitans, K., & Brown, R. H. (1965) · International Journal of Machine Tool Design and Research · doi:10.1016/0020-7357(65)90023-5 · Cited by 44 · cited 2×
“While most plasticity studies have been concerned with the plastic behavior of metals, wax has also been used as a work material [35,36], and waxes can be closer to rigid-plastic than metals.”
BackgroundScaling walls: Applying dry adhesives to the real world
Hawkes, E. W., Ulmen, J., Esparza, N., & Cutkosky, M. R. (2011) · 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2011.6095103 · Cited by 39 · cited 1×
“In particular, the 0.8 kg StickybotIII robot climbs using approximately 7 cm 2 of adhesive per foot, and the 4 kg RiSE robot climbs using approximately 20 cm 2 per foot (both robots have four feet and lift two at a time) [25].”
MethodInfluentialSelf-citationScaling walls: Applying dry adhesives to the real world
Hawkes, E. W., Ulmen, J., Esparza, N., & Cutkosky, M. R. (2011) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2011.6048866 · Cited by 38
Self-citationEffect of fibril shape on adhesive properties
Soto, D. R., Hill, G. C., Parness, A. J., Esparza, N., Cutkosky, M. R., & Kenny, T. (2010) · Applied Physics Letters · doi:10.1063/1.3464553 · Cited by 25 · cited 1×
“The micro-wedges’ asymmetric taper ensures that the radius of curvature of the surface at the proximal edge of the contact patch increases with increasing shear load, allowing the tapered features to outperform features of constant cross-section at high shear loads [26].”
BackgroundSelf-citationOn the mechanics of the oblique cutting of metal strips with knife-edged tools
Meguid, S. A., & Collins, I. F. (1977) · International Journal of Mechanical Sciences · doi:10.1016/0020-7403(77)90089-3 · Cited by 7 · cited 1×
“Consider the model proposed by Meguid and Collins [37], which is an extension of Hill’s wedge indenting solution [30] to the case where a rigid, frictionless wedge enters the material obliquely.”
MethodModel of micro-cutting and analysis of micro cutting force
Li, X., Yu, H., Xu, J., Liu, A., & Lv, H. (2009) · International Conference on Mechatronics and Automation · doi:10.1109/icma.2009.5246594 · Cited by 2 · cited 1×
“As a result, assuming that the tip of the tool is sufficiently sharp [36,39], the zone of plastic deformation is limited to the leading side of the tool only, and material on the trailing side remains rigid throughout the process, theoretically preventing partial collapse of the previous cavity.”
Background
Research works printed but not linked: 3
- 1941, Chip Formation, Friction and High Quality Machined Surfaces, 299
- 1957, The Use of Paraffin Wax as a Model Material to Simulate the Plastic Deformation of Metals, J. Iron Steel Inst., London, 185, 375
- 1973, Engineering Plasticity
Cited by
A Soft Robotic Gripper With Gecko-Inspired Adhesive
Glick, P., Suresh, S. A., Ruffatto, D., Cutkosky, M., Tolley, M. T., & Parness, A. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792688 · Cited by 381
Self-citationJiang, H., Hawkes, E. W., Fuller, C., Estrada, M. A., Suresh, S. A., Abcouwer, N., Han, A. K., Wang, S., Ploch, C. J., Parness, A., et al. (2017) · Science Robotics · doi:10.1126/scirobotics.aan4545 · Cited by 337
“The microwedge shapes are formed by creating a mold in soft wax and then cast onto a prepared backing, using the process detailed in (46) and (47).”
MethodSelf-citationA Survey on Load Transportation Using Multirotor UAVs
Villa, D. K. D., Brandão, A. S., & Sarcinelli-Filho, M. (2020) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-019-01088-w · Cited by 247
“To adhere into smooth surfaces, the FlyCroTugs uses a square 25-by-25 mm 2 pad of directional gecko-like dry adhesives [85], capable of generating shear forces up to 45 N in that surfaces.”
MethodEngineering Micropatterned Dry Adhesives: From Contact Theory to Handling Applications
Hensel, R., Moh, K., & Arzt, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800865 · Cited by 195
From grasping to manipulation with gecko-inspired adhesives on a multifinger gripper
Ruotolo, W., Brouwer, D., & Cutkosky, M. R. (2021) · Science Robotics · doi:10.1126/scirobotics.abi9773 · Cited by 162
“2 of 13 The adhesives used for testing consist of a directional, microwedge design as presented in (21)—but our purpose is to address the hand design considerations necessary for efficient use of any directional adhesive, independent of the material properties and force limits of that particular implementation.”
MethodSelf-citation
Metadata
- Authors
- Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M.
- Affiliations
- Los Alamos National Laboratory (US)
- Stanford University (US)
- e-mail:
- Corresponding author
- Day, Paul
- Eason, Eric V.
- Christensen, David
- Cutkosky, Mark
- ORCID
- Cutkosky, Mark
- Venue
- Journal of Micro and Nano-Manufacturing
- Publisher
- ASME International
- Published
- 2013-03-01
- Volume
- 1
- Issue
- 1
- ISSN
- 2166-0468 (ISSN-L)
- 2166-0476
- OpenAlex
- W2125778968
- Cited by
- 112
- References
- 46
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 7 · 2023: 10 · 2022: 9 · 2021: 17 · 2020: 7 · 2019: 13 · 2018: 7 · 2017: 9 · 2016: 6 · 2015: 9 · 2014: 4 · 2013: 4
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Micro and Nano-Manufacturing (publishedVersion)
- Funders
- National Science Foundation
- Hertz Foundation
- Defense Advanced Research Projects Agency
- Los Alamos National Laboratory
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Keywords
- micromachining, mold making, cavity geometry, tool trajectory, gecko-inspired adhesion, shear adhesion, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.