The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Abstract
There is consensus among both the research and industrial communities, and even the general public, that additive manufacturing (AM) processes capable of processing metallic materials are a set of game changing technologies that offer unique capabilities with tremendous application potential that cannot be matched by traditional manufacturing technologies. Unfortunately, with all what AM has to offer, the quality and repeatability of metal parts still hamper significantly their widespread as viable manufacturing processes. This is particularly true in industrial sectors with stringent requirements on part quality such as the aerospace and healthcare sectors. One approach to overcome this challenge that has recently been receiving increasing attention is process monitoring and real-time process control to enhance part quality and repeatability. This has been addressed by numerous research efforts in the past decade and continues to be identified as a high priority research goal. In this review paper, we fill an important gap in the literature represented by the absence of one single source that comprehensively describes what has been achieved and provides insight on what still needs to be achieved in the field of process monitoring and control for metal-based AM processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Steen, W. M. (1998) · Springer eBooks · doi:10.1007/978-1-4471-3609-5 · Cited by 1,547
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Roberts, I. A., Wang, C., Esterlein, R., Stanford, M., & Mynors, D. J. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 796
(2013) · Medical Entomology and Zoology · Cited by 690
A review of rapid prototyping technologies and systems
Yan, X., & Gu, P. (1996) · Computer-Aided Design · doi:10.1016/0010-4485(95)00035-6 · Cited by 565
Closed loop direct metal deposition: art to part
Mazumder, J., Dutta, D., Kikuchi, N., & Ghosh, A. (2000) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(00)00072-5 · Cited by 452
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Analysis of rapid manufacturing—using layer manufacturing processes for production
Hopkinson, N., & Dicknes, P. (2003) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/095440603762554596 · Cited by 412
(2017) · Encyclopedia of Soil Science, Third Edition · doi:10.1081/e-ess3-120001965 · Cited by 401
Fundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
Solidification in direct metal deposition by LENS processing
Hofmeister, W., & Griffith, M. (2001) · JOM · doi:10.1007/s11837-001-0066-z · Cited by 351
3D FE simulation for temperature evolution in the selective laser sintering process
Kolossov, S., Boillat, É., Glardon, R., Fischer, P., & Locher, M. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.10.019 · Cited by 338
Sensing, modeling and control for laser-based additive manufacturing
Hu, D., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00163-3 · Cited by 329
Understanding thermal behavior in the LENS process
Griffith, M. L., Schlienger, M. E., Harwell, L. D., Oliver, M. S., Baldwin, M. D., Ensz, M. T., Essien, M., Brooks, J., Robino, C. V., Smugeresky, J. E., et al. (1999) · Materials & Design · doi:10.1016/s0261-3069(99)00016-3 · Cited by 327
Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologies
Berumen, S., Bechmann, F., Lindner, S., Kruth, J.-P., & Craeghs, T. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.089 · Cited by 307
Direct materials deposition: designed macro and microstructure
Mazumder, J., Schifferer, A., & Choi, J. (1999) · Materials Research Innovations · doi:10.1007/s100190050137 · Cited by 302
Feedback control of Layerwise Laser Melting using optical sensors
Craeghs, T., Bechmann, F., Berumen, S., & Kruth, J.-P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.078 · Cited by 288
Control of melt pool temperature and deposition height during direct metal deposition process
Song, L., Bagavath-Singh, V., Dutta, B., & Mazumder, J. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3395-2 · Cited by 283
Modelling and simulation of electron beam melting
Zäh, M. F., & Lutzmann, S. (2010) · Production Engineering · doi:10.1007/s11740-009-0197-6 · Cited by 263
Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
A three dimensional model for direct laser metal powder deposition and rapid prototyping
Labudovic, M., Hu, D., & Kovacevic, R. (2003) · Journal of Materials Science · doi:10.1023/a:1021153513925 · Cited by 244
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F., & Ebert, M.-C. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.097 · Cited by 226
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling
Childs, T. H. C., Hauser, C., & Badrossamay, M. (2005) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/095440505x8109 · Cited by 199
Mok, S. H., Bi, G., Folkes, J., & Pashby, I. R. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.02.008 · Cited by 196
Modeling of laser cladding with powder injection
Han, L., Phatak, K. M., & Liou, F. W. (2004) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-004-0070-0 · Cited by 192
Feedback control of selective laser melting
Kruth, J., Mercelis, P., Vaerenbergh, J. V., & Craeghs, T. (2007) · Lirias (KU Leuven) · Cited by 192
Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
Craeghs, T., Clijsters, S., Yasa, E., Bechmann, F., Berumen, S., & Kruth, J.-P. (2011) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2011.06.016 · Cited by 187
Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V
Jamshidinia, M., Kong, F., & Kovacevic, R. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025746 · Cited by 181
Practical Temperature Measurement
(2001) · Elsevier eBooks · doi:10.1016/b978-0-7506-5080-9.x5000-x · Cited by 161
Introduction to Light Emitting Diode Technology and Applications
Held, G. (2010) · Auerbach Publications eBooks · doi:10.1201/9781420076639 · Cited by 157
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
Islam, M. D. S., Purtonen, T., Piili, H., Salminen, A., & Nyrhilä, O. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.156 · Cited by 156
Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process
Salehi, D., & Brandt, M. (2005) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-2514-3 · Cited by 153
Characterization of the process control for the direct laser metallic powder deposition
Bi, G., Gasser, A., Wissenbach, K., Drenker, A., & Poprawe, R. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.05.006 · Cited by 152
Research on molten pool temperature in the process of laser rapid forming
Tan, H., Chen, J., Xin, L., Fengying, Z., & Weidong, H. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.06.090 · Cited by 152
Online Quality Control of Selective Laser Melting
Craeghs, T., Clijsters, S., Yasa, E., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15289 · Cited by 149
Thermography for Monitoring the Selective Laser Melting Process
Krauss, H., Eschey, C., & Zaeh, M. F. (2012) · doi:10.26153/tsw/15406 · Cited by 149
Pyrometric analysis of thermal processes in SLM technology
Pavlov, M. D., Doubenskaia, M., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.080 · Cited by 140
Increased stability in laser metal wire deposition through feedback from optical measurements
Heralić, A., Christiansson, A., Ottosson, M., & Lennartson, B. (2009) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2009.08.012 · Cited by 139
In situ flaw detection by IR‐imaging during electron beam melting
Schwerdtfeger, J., Singer, R. F., & Körner, C. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231572 · Cited by 139
Error Detection in Laser Beam Melting Systems by High Resolution Imaging
Kleszczynski, S., Jacobsmühlen, J. Z., Sehrt, J. T., & Witt, G. (2012) · RWTH Publications (RWTH Aachen) · doi:10.26153/tsw/15404 · Cited by 138
Numerical modeling of the thermal behavior during the LENS® process
Ye, R., Smugeresky, J. E., Zheng, B., Zhou, Y., & Lavernia, E. J. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.04.079 · Cited by 138
FURUMOTO, T., Takashi, U. E. D. A., Alkahari, M. R., & Hosokawa, A. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.03.032 · Cited by 138
Shah, K., Pinkerton, A. J., Salman, A., & Li, L. (2010) · Materials and Manufacturing Processes · doi:10.1080/10426914.2010.480999 · Cited by 132
Bond formation and fiber embedment during ultrasonic consolidation
Yang, Y., Ram, G. D. J., & Stucker, B. E. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.01.014 · Cited by 130
Investigation of Residual Stresses Induced during the Selective Laser Melting Process
Belle, L. V., Vansteenkiste, G., & Boyer, J. C. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.554-557.1828 · Cited by 130
Tang, L. X., & Landers, R. G. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000882 · Cited by 128
Bi, G., Sun, C., & Gasser, A. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.10.006 · Cited by 126
On-line temperature monitoring in selective laser sintering/melting
Chivel’, Y. A., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.079 · Cited by 126
Development and qualification of a novel laser-cladding head with integrated sensors
Bi, G., Schürmann, B., Gasser, A., Wissenbach, K., & Poprawe, R. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.05.010 · Cited by 112
Dinwiddie, R. B., Dehoff, R., Lloyd, P. D., Lowe, L. E., & Ulrich, J. B. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2018412 · Cited by 112
Sriraman, M. R., Gonser, M., Fujii, H. T., Babu, S. S., & Bloss, M. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.05.003 · Cited by 105
Effects of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding
Lee, H.-K. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.09.024 · Cited by 99
Design characteristics and development of a nozzle for coaxial laser cladding
Lin, J., & Steen, W. M. (1998) · Journal of Laser Applications · doi:10.2351/1.521821 · Cited by 92
The role and future of the Laser Technology in the Additive Manufacturing environment
Levy, G. N. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.123 · Cited by 89
Selective laser melting process monitoring with high speed infra-red camera and pyrometer
Bayle, F., & Doubenskaia, M. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.786940 · Cited by 81
Alimardani, M., Toyserkani, E., & Huissoon, J. P. (2006) · Journal of Laser Applications · doi:10.2351/1.2402518 · Cited by 80
A model to characterize acoustic softening during ultrasonic consolidation
Kelly, G. S., Advani, S. G., Gillespie, J. W., & Bogetti, T. A. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.05.008 · Cited by 79
Integration of a Thermal Imaging Feedback Control System in Electron Beam Melting
Rodriguez, E., Medina, F. R., Espalin, D., Terrazas, C. A., Muse, D., Henry, C., MacDonald, E. W., & Wicker, R. B. (2012) · doi:10.26153/tsw/15402 · Cited by 78
Optical System for On-Line Monitoring and Temperature Control in Selective Laser Melting Technology
Doubenskaia, M., Pavlov, M. D., & Chivel, Y. A. (2010) · Key engineering materials · doi:10.4028/www.scientific.net/kem.437.458 · Cited by 75
Song, Y., & Koenig, W. (1997) · CIRP Annals · doi:10.1016/s0007-8506(07)60790-2 · Cited by 74
Santoro, A. (1995) · Nephrology Dialysis Transplantation · doi:10.1093/ndt/10.5.615 · Cited by 72
Fathi, A., Khajepour, A., Durali, M., & Toyserkani, E. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823085 · Cited by 71
Experimental and Numerical Study of the LENS Rapid Fabrication Process
Wang, L., Felicelli, S. D., & Craig, J. E. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3173952 · Cited by 69
Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera
FURUMOTO, T., Alkahari, M. R., Takashi, U. E. D. A., Aziz, M. S. A., & Hosokawa, A. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.098 · Cited by 66
Tang, L. X., & Landers, R. G. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000883 · Cited by 62
Zalameda, J. N., Burke, E., Hafley, R. A., Taminger, K. M. B., Domack, C. S., Brewer, A., & Martin, R. E. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2018233 · Cited by 59
Experimental Temperature Analysis of Powder-Based Electron Beam Additive Manufacturing
Price, S., Lydon, J., Cooper, K., & Chou, K. (2013) · doi:10.26153/tsw/15422 · Cited by 54
Height Control in Laser Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment
Ƶeinali, M., & Khajepour, A. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4002023 · Cited by 51
Liu, J., & Li, L. (2004) · Optics & Laser Technology · doi:10.1016/j.optlastec.2003.12.003 · Cited by 51
Micro-structure and Mechanical Properties of Nano-TiC Reinforced Inconel 625 Deposited using LAAM
Bi, G., Sun, C., Nai, M. L. S., & Wei, J. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.155 · Cited by 51
Vision-based clad height measurement
Davis, T. A., & Shin, Y. C. (2010) · Machine Vision and Applications · doi:10.1007/s00138-009-0240-9 · Cited by 46
DeVor, R. E., Kapoor, S. G., Cao, J., & Ehmann, K. F. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4006095 · Cited by 46
Transient thermal response in ultrasonic additive manufacturing of aluminum 3003
Schick, D., Babu, S. S., Foster, D., Dapino, M. J., Short, M., & Lippold, J. C. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156496 · Cited by 40
Research and Development of a Hybrid Rapid Manufacturing Process
Liou, F., Choi, J. R., Landers, R. G., Janardhan, V., Balakrishnan, S. N., & Agarwal, S. (2001) · doi:10.26153/tsw/3246 · Cited by 40
Temperature Measurements in Powder-Bed Electron Beam Additive Manufacturing
Price, S., Lydon, J., Cooper, K., & Chou, K. (2014) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2014-36661 · Cited by 35
Price, S., Cooper, K. G., & Chou, K. (2014) · International Journal of Rapid Manufacturing · doi:10.1504/ijrapidm.2014.062010 · Cited by 35
Surface Laser Sintering of exothermic powder compositions: A thermal and SEM/EDX study
Shishkovsky, I. V., Scherbakov, V. I., Morozov, Y. G., Валерьевич, К. М., & Parkin, I. P. (2007) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8353-8 · Cited by 32
Measurement of temperature distributions during laser cladding process
HU, Y. P., Chen, C. W., & Mukherjee, K. (2000) · Journal of Laser Applications · doi:10.2351/1.521921 · Cited by 31
Automatic Feedback Control in Electron Beam Melting Using Infrared Thermography
Mireles, J., Terrazas, C. A., Medina, F. R., & Wicker, R. B. (2013) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15597 · Cited by 28
Porogen Templating Processes: An Overview
Hong, Y., Zhou, J. G., & Yao, D. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4026899 · Cited by 22
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
“To face this issue, the development of process monitoring methodologies based on insitu sensing as well as novel feedback control strategies was indicated as a priority research area by many recent keynote studies, projects and roadmaps (Mellor et al., 2014; Olakanmi et al., 2015; Mani et al., 2015; Tapia and Elwany,…”
InfluentialDirected Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Metadata
- Authors
- Tapia, G., & Elwany, A.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2014-10-24
- Volume
- 136
- Issue
- 6
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2148430292
- Cited by
- 711
- References
- 85
- FWCI
- 36.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.