The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Hybrid Processes in Additive Manufacturing
Abstract
Hybrid additive manufacturing (hybrid-AM) has described hybrid processes and machines as well as multimaterial, multistructural, and multifunctional printing. The capabilities afforded by hybrid-AM are rewriting the design rules for materials and adding a new dimension in the design for additive manufacturing (AM) paradigm. This work primarily focuses on defining hybrid-AM in relation to hybrid manufacturing (HM) and classifying hybrid-AM processes. Hybrid-AM machines, materials, structures, and function are also discussed. Hybrid-AM processes are defined as the use of AM with one or more secondary processes or energy sources that are fully coupled and synergistically affect part quality, functionality, and/or process performance. Historically, defining HM processes centered on process improvement rather than improvements to part quality or performance; however, the primary goal for the majority of hybrid-AM processes is to improve part quality and part performance rather than improve processing. Hybrid-AM processes are typically a cyclic process chain and are distinguished from postprocessing operations that do not meet the fully coupled criterion. Secondary processes and energy sources include subtractive and transformative manufacturing technologies, such as machining, remelting, peening, rolling, and friction stir processing (FSP). As interest in hybrid-AM grows, new economic and sustainability tools are needed as well as sensing technologies that better facilitate hybrid processing. Hybrid-AM has ushered in the next evolutionary step in AM and has the potential to profoundly change the way goods are manufactured.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Invited review article: Strategies and processes for high quality wire arc additive manufacturing
Cunningham, C. R., Flynn, J. M., Shokrani, A., Dhokia, V., & Newman, S. T. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.020 · Cited by 820
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S., & Gisario, A. (2019) · Applied Sciences · doi:10.3390/app9183865 · Cited by 419
Metadata
- Authors
- Sealy, M. P., Madireddy, G., Williams, R. E., Rao, P., & Toursangsaraki, M.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2018-03-23
- Volume
- 140
- Issue
- 6
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2772700148
- Cited by
- 223
- References
- 2
- FWCI
- 7.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid Processes in Additive Manufacturing. https://app.cochat.ai/papers/10.1115/1.4038644
- The paper
- Sealy, M. P., Madireddy, G., Williams, R. E., Rao, P., & Toursangsaraki, M. (2018). Hybrid Processes in Additive Manufacturing. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.4038644
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.