The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Plasma-polymer interactions: A review of progress in understanding polymer resist mask durability during plasma etching for nanoscale fabrication
Abstract
Photolithographic patterning of organic materials and plasma-based transfer of photoresist patterns into other materials have been remarkably successful in enabling the production of nanometer scale devices in various industries. These processes involve exposure of highly sensitive polymeric nanostructures to energetic particle fluxes that can greatly alter surface and near-surface properties of polymers. The extension of lithographic approaches to nanoscale technology also increasingly involves organic mask patterns produced using soft lithography, block copolymer self-assembly, and extreme ultraviolet lithographic techniques. In each case, an organic film-based image is produced, which is subsequently transferred by plasma etching techniques into underlying films/substrates to produce nanoscale materials templates. The demand for nanometer scale resolution of image transfer protocols requires understanding and control of plasma/organic mask interactions to a degree that has not been achieved. For manufacturing of below 30 nm scale devices, controlling introduction of surface and line edge roughness in organic mask features has become a key challenge. In this article, the authors examine published observations and the scientific understanding that is available in the literature, on factors that control etching resistance and stability of resist templates in plasma etching environments. The survey of the available literature highlights that while overall resist composition can provide a first estimate of etching resistance in a plasma etch environment, the molecular structure for the resist polymer plays a critical role in changes of the morphology of resist patterns, i.e., introduction of surface roughness. Our own recent results are consistent with literature data that transfer of resist surface roughness into the resist sidewalls followed by roughness extension into feature sidewalls during plasma etch is a formation mechanism of rough sidewalls. The authors next summarize the results of studies on chemical and morphological changes induced in selected model polymers and advanced photoresist materials as a result of interaction with fluorocarbon/Ar plasma, and combinations of energetic ion beam/vacuum ultraviolet (UV) irradiation in an ultrahigh vacuum system, which are aimed at the fundamental origins of polymer surface roughness, and on establishing the respective roles of (a) polymer structure/chemistry and (b) plasma-process parameters on the consequences of the plasma-polymer interactions. Plasma induced resist polymer modifications include formation of a thin (∼1–3 nm) dense graphitic layer at the polymer surface due to ion bombardment and deeper-lying modifications produced by plasma-generated vacuum ultraviolet (VUV) irradiation. The relative importance of the latter depends strongly on initial polymer structure, whereas the ion bombardment induced modified layers are similar for various hydrocarbon polymers. The formation of surface roughness is found to be highly polymer structure specific. Beam studies have revealed a strong ion/UV synergistic effect where the polymer modifications introduced at various depths by ions or ultraviolet/UV photons can interact. A possible fundamental mechanism of initial plasma-induced polymer surface roughness formation has been proposed by Bruce et al. [J. Appl. Phys. 107, 084310 (2010)]. In their work, they measured properties of the ion-modified surface layer formed on polystyrene (PS) polymer surfaces, and by considering the properties of the undamaged PS underlayer, they were able to evaluate the stressed bilayer using elastic buckling theory. Their approach was remarkably successful in reproducing the wavelength and amplitude of measured surface roughness introduced for various ion bombardment conditions, and other variations of experimental parameters. Polymer material-dependent VUV modifications introduced to a depth of about 100 nm can either soften (scission) or stiffen (cross-linking) this region, which produce enhanced or reduced surface roughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Fractal Concepts in Surface Growth
Barabási, A. L., & Stanley, H. E. (1995) · doi:10.1017/cbo9780511599798 · Cited by 3,925
Block Copolymers—Designer Soft Materials
Bates, F. S., & Fredrickson, G. H. (1999) · Physics Today · doi:10.1063/1.882522 · Cited by 3,219
Nanostructure fabrication using block copolymers
Hamley, I. W. (2003) · Nanotechnology · doi:10.1088/0957-4484/14/10/201 · Cited by 773
Dry Etch Resistance of Organic Materials
Gokan, H., Esho, S., & Ohnishi, Y. (1983) · Journal of The Electrochemical Society · doi:10.1149/1.2119642 · Cited by 265
Cited by
Plasma etching: Yesterday, today, and tomorrow
Donnelly, V. M., & Kornblit, A. (2013) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4819316 · Cited by 880
Atomic Layer Etching at the Tipping Point: An Overview
Oehrlein, G. S., Metzler, D., & Li, C. (2015) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0061506jss · Cited by 295
Self-citationTakei, S., Oshima, A., Ichikawa, T., Sekiguchi, A., Kashiwakura, M., Kozawa, T., Tagawa, S., Oyama, T. G., Ito, S., & Miyasaka, H. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.02.026 · Cited by 28
Metadata
- Authors
- Oehrlein, G. S., Phaneuf, R. J., & Graves, D. B.
- Venue
- Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2011-01-01
- Volume
- 29
- Issue
- 1
- ISSN
- 2166-2746 (ISSN-L)
- 2166-2754
- OpenAlex
- W1988706967
- Cited by
- 203
- References
- 5
- FWCI
- 12.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.