The DOI matches its Crossref record.
β-(AlxGa1−x)2O3/Ga2O3 (010) heterostructures grown on β-Ga2O3 (010) substrates by plasma-assisted molecular beam epitaxy
Abstract
By systematically changing growth parameters, the growth of β-(AlxGa1−x)2O3/Ga2O3 (010) heterostructures by plasma-assisted molecular beam epitaxy was optimized. Through variation of the Al flux under O-rich conditions at 600 °C, β-(AlxGa1−x)2O3 (010) layers spanning ∼10% to ∼18% Al2O3 were grown directly on β-Ga2O3 (010) substrates. Nominal β-(AlxGa1−x)2O3 (010) compositions were determined through Al:Ga flux ratios. With x = ∼0.18, the β-(AlxGa1−x)2O3 (020) layer peak in a high-resolution x-ray diffraction (HRXRD) ω-2θ scan was barely discernible, and Pendellösung fringes were not visible. This indicated that the phase stability limit of Al2O3 in β-Ga2O3 (010) at 600 °C was less than ∼18%. The substrate temperature was then varied for a series of β-(Al∼0.15Ga∼0.85)2O3 (010) layers, and the smoothest layer was grown at 650 °C. The phase stability limit of Al2O3 in β-Ga2O3 (010) appeared to increase with growth temperature, as the β-(AlxGa1−x)2O3 (020) layer peak with x = ∼0.18 was easily distinguishable by HRXRD in a sample grown at 650 °C. Cross-sectional transmission electron microscopy (TEM) indicated that β-(Al∼0.15Ga∼0.85)2O3 (010) layers (14.4% Al2O3 by energy dispersive x-ray spectroscopy) grown at 650 °C were homogeneous. β-(Al∼0.20Ga∼0.80)2O3 (010) layers, however, displayed a phase transition. TEM images of a β-(Al∼0.15Ga∼0.85)2O3/Ga2O3 (010) superlattice grown at 650 °C showed abrupt layer interfaces and high alloy homogeneity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of Ga2O3 materials, processing, and devices
Pearton, S. J., Yang, J., Cary, P. H., Ren, F., Kim, J., Tadjer, M. J., & Mastro, M. A. (2018) · Applied Physics Reviews · doi:10.1063/1.5006941 · Cited by 3,117
Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges
Tsao, J. Y., Chowdhury, S., Hollis, M. A., Jena, D., Johnson, N. M., Jones, K. A., Kaplar, R. J., Rajan, S., Van de Walle, C. G., Bellotti, E., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201600501 · Cited by 1,602
Perspective: Ga2O3 for ultra-high power rectifiers and MOSFETS
Pearton, S. J., Ren, F., Tadjer, M., & Kim, J. (2018) · Journal of Applied Physics · doi:10.1063/1.5062841 · Cited by 659
Recent progress on the electronic structure, defect, and doping properties of Ga2O3
Zhang, J., Shi, J., Qi, D.-C., Chen, L., & Zhang, K. H. L. (2020) · APL Materials · doi:10.1063/1.5142999 · Cited by 596
β-Gallium oxide power electronics
Green, A. J., Speck, J., Xing, G., Moens, P., Allerstam, F., Gumaelius, K., Neyer, T., Arias-Purdue, A., Mehrotra, V., Kuramata, A., et al. (2022) · APL Materials · doi:10.1063/5.0060327 · Cited by 533
Self-citation
Metadata
- Authors
- Kaun, S. W., Wu, F., & Speck, J. S.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2015-06-10
- Volume
- 33
- Issue
- 4
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W872883881
- Cited by
- 171
- References
- 0
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: β-(AlxGa1−x)2O3/Ga2O3 (010) heterostructures grown on β-Ga2O3 (010) substrates by plasma-assisted molecular beam epitaxy. https://app.cochat.ai/papers/10.1116/1.4922340
- The paper
- Kaun, S. W., Wu, F., & Speck, J. S. (2015). β-(AlxGa1−x)2O3/Ga2O3 (010) heterostructures grown on β-Ga2O3 (010) substrates by plasma-assisted molecular beam epitaxy. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. https://doi.org/10.1116/1.4922340
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.