The DOI matches its Crossref record.
Planar magnetron sputtering
Abstract
The technology is reviewed with emphasis on implementation. PM sputtering is characterized by cathode potentials of 300–700 V and sputtering gas pressures of 1-15 mTorr (0.1–2 Pa). Deposition rates are proportional to power density, which in turn is primarily limited by the thermal conductivity and cooling efficiency of the target. rf operating characteristics are similar to dc, but plasma plus target impedance is somewhat higher. For both rf and dc PM sputtering higher power (or current) densities are achievable at lower target potentials than for conventional sputtering. Permanent magnets and electro-magnets have been used to produce closed electron-trapping field patterns adjacent to the surface of both circular and rectangular planar targets. Plasma intensity and target erosion is a maximum where the magnetic field lines are parallel to the cathode surface. Deposition uniformity can be achieved by substrate motion combined with optimized magnet geometry. For a given material at equivalent deposition rates PM sputtering results in less substrate heating due to reduced bombardment by dark-space-accelerated electrons.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Magnetron sputtering: a review of recent developments and applications
Kelly, P. J., & Arnell, R. D. (2000) · Vacuum · doi:10.1016/s0042-207x(99)00189-x · Cited by 2,136
Ionized physical vapor deposition (IPVD): A review of technology and applications
Helmersson, U., Lattemann, M., Bohlmark, J., Ehiasarian, A. P., & Gudmundsson, J. T. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.03.033 · Cited by 1,081
High power impulse magnetron sputtering discharge
Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U. (2012) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3691832 · Cited by 761
Physics and technology of magnetron sputtering discharges
Gudmundsson, J. T. (2020) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/abb7bd · Cited by 532
Sputtering thin films: Materials, applications, challenges and future directions
Garg, R., Gonuguntla, S., Sk, S., Iqbal, M. S., Dada, A. O., Pal, U., & Ahmadipour, M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103203 · Cited by 353
Eremin, D., Berger, B., Engel, D., Kallähn, J., Köhn, K., Krüger, D., Xu, L., Oberberg, M., Wölfel, C., Lunze, J., et al. (2023) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/acc47f · Cited by 22
Metadata
- Authors
- Waits, R. K.
- Venue
- Journal of Vacuum Science and Technology
- Publisher
- American Vacuum Society
- Published
- 1978-03-01
- Volume
- 15
- Issue
- 2
- Pages
- 179-187
- ISSN
- 0022-5355 (ISSN-L)
- OpenAlex
- W2004691564
- Cited by
- 242
- References
- 0
- FWCI
- 8.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.