The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
High power impulse magnetron sputtering discharge
Open accessAbstract
The high power impulse magnetron sputtering (HiPIMS) discharge is a recent addition to plasma based sputtering technology. In HiPIMS, high power is applied to the magnetron target in unipolar pulses at low duty cycle and low repetition frequency while keeping the average power about 2 orders of magnitude lower than the peak power. This results in a high plasma density, and high ionization fraction of the sputtered vapor, which allows better control of the film growth by controlling the energy and direction of the deposition species. This is a significant advantage over conventional dc magnetron sputtering where the sputtered vapor consists mainly of neutral species. The HiPIMS discharge is now an established ionized physical vapor deposition technique, which is easily scalable and has been successfully introduced into various industrial applications. The authors give an overview of the development of the HiPIMS discharge, and the underlying mechanisms that dictate the discharge properties. First, an introduction to the magnetron sputtering discharge and its various configurations and modifications is given. Then the development and properties of the high power pulsed power supply are discussed, followed by an overview of the measured plasma parameters in the HiPIMS discharge, the electron energy and density, the ion energy, ion flux and plasma composition, and a discussion on the deposition rate. Finally, some of the models that have been developed to gain understanding of the discharge processes are reviewed, including the phenomenological material pathway model, and the ionization region model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets
Sigmund, P. (1969) · Physical Review · doi:10.1103/physrev.184.383 · Cited by 3,589
Introduction to Plasma Physics and Controlled Fusion
Chen, F. F. (1984) · Springer eBooks · doi:10.1007/978-1-4757-5595-4 · Cited by 3,279
Thornton, J. A. (1974) · Journal of Vacuum Science and Technology · doi:10.1116/1.1312732 · Cited by 2,421
Magnetron sputtering: a review of recent developments and applications
Kelly, P. J., & Arnell, R. D. (2000) · Vacuum · doi:10.1016/s0042-207x(99)00189-x · Cited by 2,136
An introduction to plasma physics
(1963) · Journal of the Franklin Institute · doi:10.1016/0016-0032(63)90329-6 · Cited by 1,393
II. The energy spectrum of ejected atoms during the high energy sputtering of gold
Thompson, M. W. (1968) · Philosophical Magazine · doi:10.1080/14786436808227358 · Cited by 1,198
The Characteristics of Electrical Discharges in Magnetic Fields
(1950) · Journal of the American Medical Association · doi:10.1001/jama.1950.02920020129032 · Cited by 1,128
Ionized physical vapor deposition (IPVD): A review of technology and applications
Helmersson, U., Lattemann, M., Bohlmark, J., Ehiasarian, A. P., & Gudmundsson, J. T. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.03.033 · Cited by 1,081
Self-citationA novel pulsed magnetron sputter technique utilizing very high target power densities
Kouznetsov, V., Macák, K., Schneider, J. M., Helmersson, U., & Petrov, I. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00292-3 · Cited by 1,080
Self-citation
Cited by
Physics and technology of magnetron sputtering discharges
Gudmundsson, J. T. (2020) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/abb7bd · Cited by 532
Self-citationTutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)
Anders, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4978350 · Cited by 424
2D axial-azimuthal particle-in-cell benchmark for low-temperature partially magnetized plasmas
Charoy, T., Boeuf, J. P., Bourdon, A., Carlsson, J. A., Chabert, P., Cuenot, B., Eremin, D., Garrigues, L., Hara, K., Kaganovich, I. D., et al. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab46c5 · Cited by 153
Reactive HiPIMS Deposition of SiO2/Ta2O5 Optical Interference Filters
Hála, M., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.-E., & Martinu, L. (2014) · Journal of Applied Physics · doi:10.1063/1.4903285 · Cited by 51
Metadata
- Authors
- Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2012-03-14
- Volume
- 30
- Issue
- 3
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2090071143
- Cited by
- 761
- References
- 87
- FWCI
- 29.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High power impulse magnetron sputtering discharge. https://app.cochat.ai/papers/10.1116/1.3691832
- The paper
- Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U. (2012). High power impulse magnetron sputtering discharge. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. https://doi.org/10.1116/1.3691832
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.