The DOI matches its Crossref record.
The microstructure of sputter‐deposited coatings
Abstract
Microstructure is a critical consideration when polycrystalline or amorphous thin films are used for applications such as microcircuit metallization layers and diffusion barriers. The trend in device fabrication toward lower processing temperatures means that such coatings must often be deposited at substrate temperatures T that are low relative to the coating material melting point Tm. The structure of vapor deposited coatings grown under these conditions consists typically of a columnar growth structure, defined by voided open boundaries, which is superimposed on a microstructure which may be polycrystalline (defined by metallurgical grain boundaries) or amorphous. The voided growth structure is clearly undesirable for most applications. Its occurrence is a fundamental consequence of atomic shadowing acting in concert with the low adatom mobilities that characterize low T/Tm deposition, and its formation can be enhanced by the surface irregularities which are common to microcircuit fabrication. This paper reviews some of the recent developments in understanding the fundamental aspects of the relationship between the deposition conditions and the microstructure of sputter‐deposited thin films, with particular emphasis on the origin of the growth structure and its suppression through energetic particle bombardment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Transparent conductors as solar energy materials: A panoramic review
Granqvist, C. G. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.031 · Cited by 1,566
Plasmonic Films Can Easily Be Better: Rules and Recipes
McPeak, K. M., Jayanti, S. V., Kress, S. J. P., Meyer, S., Iotti, S., Rossinelli, A., & Norris, D. J. (2015) · ACS Photonics · doi:10.1021/ph5004237 · Cited by 1,047
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., Doll, G. L., Murray, C. E., Stoessel, C. H., & Martinu, L. (2018) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.5011790 · Cited by 858
On-chip and freestanding elastic carbon films for micro-supercapacitors
Huang, P., Lethien, C., Pinaud, S., Brousse, K., Laloo, R., Turq, V., Respaud, M., Demortière, A., Daffos, B., Taberna, P. L., et al. (2016) · Science · doi:10.1126/science.aad3345 · Cited by 719
Intrinsic stress in sputter-deposited thin films
Windischmann, H. (1992) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408439208244586 · Cited by 662
Plasmonic films can easily be better: Rules and recipes
McPeak, K. M., Jayanti, S. V., Kress, S. J. P., Meyer, S., Iotti, S., Rossinelli, A. A., & Norris, D. J. (2015) · doi:10.3929/ethz-b-000100036 · Cited by 616
Biaxial alignment in sputter deposited thin films
Mahieu, S., Ghekiere, P., Depla, D., & De Gryse, R. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.06.027 · Cited by 456
Review of the fundamentals of thin-film growth
Kaiser, N. (2002) · Applied Optics · doi:10.1364/ao.41.003053 · Cited by 450
Patsalas, P., Kalfagiannis, N., Kassavetis, S., Abadias, G., Bellas, D. V., Lekka, C., & Lidorikis, E. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.11.001 · Cited by 265
Chemical synthesis of cobalt oxide thin film electrode for supercapacitor application
Kandalkar, S. G., Dhawale, D. S., Kim, C.-K., & Lokhande, C. D. (2010) · Synthetic Metals · doi:10.1016/j.synthmet.2010.04.003 · Cited by 263
THz emission from Co/Pt bilayers with varied roughness, crystal structure, and interface intermixing
Li, G., Medapalli, R., Mikhaylovskiy, R. V., Spada, F. E., Rasing, T., Fullerton, E. E., & Kimel, A. V. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.084415 · Cited by 65
Metadata
- Authors
- Thornton, J. A.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 1986-11
- Volume
- 4
- Issue
- 6
- Pages
- 3059-3065
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2042705332
- Cited by
- 1,336
- References
- 0
- FWCI
- 8.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.