The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Step and flash imprint lithography: a new approach to high-resolution patterning
Abstract
An alternative approach to lithography is being developed based on a dual-layer imprint scheme. This process has the potential to become a high-throughput means of producing high aspect ratio, high-resolution patterns without projection optics. In this process, a template is created on a standard mask blank by using the patterned chromium as an etch mask to produce high-resolution relief images in the quartz. The etched template and a substrate that has been coated with an organic planarization layer are brought into close proximity. A low-viscosity, photopolymerizable formulation containing organosilicon precursors is introduced into the gap between the two surfaces. The template is then brought into contact with the substrate. The solution that is trapped in the relief structures of the template is photopolymerized by exposure through the backside of the quartz template. The template is separated from the substrate, leaving a UV-curved replica of the relief structure on the planarization layer. Features smaller than 60 nm in size have been reliably produced using this imprinting process. The resolution silicon polymer images are transferred through the planarization layer by anisotropic oxygen reactive ion etching. This paper provides a progress report on our efforts to evaluate the potential of this process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mold-assisted nanolithography: A process for reliable pattern replication
Haisma, J., Verheijen, M., van den Heuvel, K., & van den Berg, J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588604 · Cited by 659
Pattern transfer to silicon by microcontact printing and RIE
Whidden, T. K., Ferry, D. K., Kozicki, M. N., Kim, E., Kumar, A., Wilbur, J. L., & Whitesides, G. M. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/4/027 · Cited by 97
Ketene acetal monomers: Cationic photopolymerization
Crivello, J. V., Lai, Y.-L., & Malik, R. (1996) · Journal of Polymer Science Part A Polymer Chemistry · Cited by 12
Cited by
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Nanoimprint lithography: An old story in modern times? A review
Schift, H. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2890972 · Cited by 726
High‐Speed Roll‐to‐Roll Nanoimprint Lithography on Flexible Plastic Substrates
Ahn, S. H., & Guo, L. J. (2008) · Advanced Materials · doi:10.1002/adma.200702650 · Cited by 618
Viscoelastic Properties of Polymers: Relevance for Hot Embossing Lithography
Hoffmann, T. (2003) · Nanostructure Science and Technology · doi:10.1007/978-1-4419-9204-8_3 · Cited by 559
Metadata
- Authors
- Colburn, M., Johnson, S. C., Stewart, M. D., Damle, S., Bailey, T. C., Choi, B., Wedlake, M., Michaelson, T. B., Sreenivasan, S. V., Ekerdt, J. G., & Willson, C. G.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 1999-06-25
- Volume
- 3676
- Pages
- 379
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2115669216
- Cited by
- 571
- References
- 3
- FWCI
- 24.44
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.