The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Nanoimprint lithography: An old story in modern times? A review
Open accessAbstract
Nanoimprint lithography (NIL) is a high throughput, high-resolution parallel patterning method in which a surface pattern of a stamp is replicated into a material by mechanical contact and three dimensional material displacement. This can be done by shaping a liquid followed by a curing process for hardening, by variation of the thermomechanical properties of a film by heating and cooling, or by any other kind of shaping process using the difference in hardness of a mold and a moldable material. The local thickness contrast of the resulting thin molded film can be used as a means to pattern an underlying substrate on wafer level by standard pattern transfer methods, but also directly in applications where a bulk modified functional layer is needed. Therefore it is mainly aimed toward fields in which electron beam and high-end photolithography are costly and do not provide sufficient resolution at reasonable throughput. The aim of this review is to play between two poles: the need to establish standard processes and tools for research and industry, and the issues that make NIL a scientific endeavor. It is not the author’s intention to duplicate the content of the reviews already published, but to look on the NIL process as a whole. The author will also address some issues, which are not covered by the other reviews, e.g., the origin of NIL and the misconceptions, which sometimes dominate the debate about problems of NIL, and guide the reader to issues, which are often forgotten or overlooked.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588605 · Cited by 1,729
Sub-10 nm imprint lithography and applications
Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589752 · Cited by 1,113
Review on micro molding of thermoplastic polymers
Heckele, M., & Schomburg, W. K. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/3/r01 · Cited by 915
The glass transition in thin polymer films
Forrest, J. A., & Dalnoki-Veress, K. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(01)00060-4 · Cited by 829
A Long Pollen Record from Lowland Amazonia: Forest and Cooling in Glacial Times
Colinvaux, P. A., De Oliveira, P. E., Moreno, J. E., Miller, M. C., & Bush, M. B. (1996) · Science · doi:10.1126/science.274.5284.85 · Cited by 796
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Mold-assisted nanolithography: A process for reliable pattern replication
Haisma, J., Verheijen, M., van den Heuvel, K., & van den Berg, J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588604 · Cited by 659
Fabrication of 5nm linewidth and 14nm pitch features by nanoimprint lithography
Austin, M. D., Ge, H., Wu, W., Li, M., Yu, Z., Wasserman, D., Lyon, S. A., & Chou, S. Y. (2004) · Applied Physics Letters · doi:10.1063/1.1766071 · Cited by 613
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Block copolymer based nanostructures: Materials, processes, and applications to electronics
Kim, H.-C., Park, S.-M., & Hinsberg, W. D. (2010) · Chemical Reviews · doi:10.1021/cr900159v · Cited by 1,017
Cantilever-like micromechanical sensors
Boisen, A., Dohn, S., Keller, S. S., Schmid, S., & Tenje, M. (2011) · Reports on Progress in Physics · doi:10.1088/0034-4885/74/3/036101 · Cited by 566
Directed self-assembly of block copolymers for use in bit patterned media fabrication
Griffiths, R. A., Williams, A., Oakland, C., Roberts, J., Vijayaraghavan, A., & Thomson, T. (2013) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/46/50/503001 · Cited by 375
A Rapid Thermal Nanoimprint Apparatus through Induction Heating of Nickel Mold
Fu, X., Chen, Q., Chen, X., Zhang, L., Yang, A., Cui, Y., Yuan, C., & Ge, H. (2019) · Micromachines · doi:10.3390/mi10050334 · Cited by 17
Metadata
- Authors
- Schift, H.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2008-03-01
- Volume
- 26
- Issue
- 2
- Pages
- 458-480
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W2068276297
- Cited by
- 726
- References
- 41
- FWCI
- 35.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nanoimprint lithography: An old story in modern times? A review. https://app.cochat.ai/papers/10.1116/1.2890972
- The paper
- Schift, H. (2008). Nanoimprint lithography: An old story in modern times? A review. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena. https://doi.org/10.1116/1.2890972
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.