The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Statistical Image Reconstruction Methods for Transmission Tomography
Abstract
The problem of forming cross-sectional or tomographic images of the attenuation characteristics of objects arises in a variety of contexts, including medical x-ray computed tomography (CT) and nondestructive evaluation of objects in industrial inspection. In the context of emission imaging, such as positron emission tomography (PET) [1, 2], single photon emission computed tomography (SPECT) [3], and related methods used in the assay of containers of radioactive waste [4], it is useful to be able to form "attenuation maps," tomographic images of attenuation coefficients, from which one can compute attenuation correction factors for use in emission image reconstruction. One can measure the attenuating characteristics of an object by transmitting a collection of photons through the object along various paths or "rays" and observing the fraction that pass unabsorbed. From measurements collected over a large set of rays, one can reconstruct tomographic images of the object. Such image reconstruction is the subject of this chapter. In all the above applications, the number of photons one can measure in a transmission scan is limited. In medical x-ray CT, source strength, patient motion, and absorbed dose considerations limit the total x-ray exposure. Implanted objects such as pacemakers also significantly reduce transmissivity and cause severe artifacts [5]. In industrial applications, source strength limitations, combined with the very large attenuation coefficients of metallic objects, often result in a small fraction of photons passing to the detector unabsorbed. In PET and SPECT imaging, the transmission scan only determines a "nuisance" parameter of secondary interest relative to the object's emission properties, so one would like to minimize the transmission scan duration. All the above considerations lead to "low-count" transmission scans. This chapter discusses algorithms for reconstructing attenuation images from low-count transmission scans. In this context, we define low-count to mean that the mean number of photons per ray is small enough that traditional filtered-backproject on (FBP) images, or even methods based on the Gaussian approximation to the distribution of the Poisson measurements (or logarithm thereof), are inadequate. We focus the presentation in the context of PET and SPECT transmission scans, but the methods are generally applicable to all low-count transmission studies. See [6] for an excellent survey of statistical approaches for the emission reconstruction problem.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Computerized Tomographic Imaging
Kak, A. C., & Slaney, M. (2001) · doi:10.1137/1.9780898719277 · Cited by 5,809
Maximum Likelihood Reconstruction for Emission Tomography
Shepp, L. A., & Vardi, Y. (1982) · IEEE Transactions on Medical Imaging · doi:10.1109/tmi.1982.4307558 · Cited by 4,429
A Method for Correcting Bone Induced Artifacts in Computed Tomography Scanners
Joseph, P. M., & Spital, R. D. (1978) · Journal of Computer Assisted Tomography · doi:10.1097/00004728-197801000-00017 · Cited by 281
Sufficient conditions for the convergence of monotonic mathematicalprogramming algorithms
Meyer, R. R. (1976) · Journal of Computer and System Sciences · doi:10.1016/s0022-0000(76)80021-9 · Cited by 113
Cited by
Statistical image reconstruction for polyenergetic X-ray computed tomography
Elbakri, I. A., & Fessler, J. A. (2002) · IEEE Transactions on Medical Imaging · doi:10.1109/42.993128 · Cited by 691
Self-citationTechnical aspects of dental CBCT: state of the art
Pauwels, R., Araki, K., Siewerdsen, J. H., & Thongvigitmanee, S. S. (2015) · Dentomaxillofacial Radiology · doi:10.1259/dmfr.20140224 · Cited by 510
An outlook on x‐ray CT research and development
Wang, G., Yu, H., & De Man, B. (2008) · Medical Physics · doi:10.1118/1.2836950 · Cited by 341
Tomographic mammography using a limited number of low‐dose cone‐beam projection images
Wu, T., Stewart, A., Stanton, M., McCauley, T., Phillips, W., Kopans, D. B., Moore, R. H., Eberhard, J. W., Opsahl‐Ong, B., Niklason, L., et al. (2003) · Medical Physics · doi:10.1118/1.1543934 · Cited by 302
Wu, Y. C., Zhu, B., Li, G., Zhang, X. H., Yu, M. H., Dong, K. G., Zhang, T. K., Yang, Y., Bi, B., Yang, J., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-33844-7 · Cited by 268
Metadata
- Authors
- Fessler, J.
- Venue
- Handbook of Medical Imaging, Volume 2. Medical Image Processing and Analysis
- Publisher
- SPIE
- Published
- 2010-03-16
- Pages
- 1-70
- OpenAlex
- W2152142562
- Cited by
- 240
- References
- 4
- FWCI
- 57.63
- Type
- book chapter
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.