CoChat

Disordered-nanoparticle–based etalon for ultrafast humidity-responsive colorimetric sensors and anti-counterfeiting displays

Open access

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.

Abstract

The development of real-time and sensitive humidity sensors is in great demand from smart home automation and modern public health. We hereby proposed an ultrafast and full-color colorimetric humidity sensor that consists of chitosan hydrogel sandwiched by a disordered metal nanoparticle layer and reflecting substrate. This hydrogel-based resonator changes its resonant frequency to external humidity conditions because the chitosan hydrogels are swollen under wet state and contracted under dry state. The response time of the sensor is ~10 4 faster than that of the conventional Fabry-Pérot design. The origins of fast gas permeation are membrane pores created by gaps between the metal nanoparticles. Such instantaneous and tunable response of a new hydrogel resonator is then exploited for colorimetric sensors, anti-counterfeiting applications, and high-resolution displays.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.abm8598

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1. Graphical illustration of MNHM etalon and its ingredients. (A) Schematics of MNHM etalon under the humid and dry state of the surrounding. (B) Ligand exchange of AgNPs-OLA transformed to AgNPs-SCN. The aggregated nanoclusters form membrane pores that aid the penetration of gas into the hydrogel layer. Gray circle, Ag NP; dot with zigzag tail, OLA ligand; dot with straight tail, SCN ligand. (C) Swelling/contraction of chitosan hydrogel under the change of humidity condition. Yellow line, chitosan network; blue dot, water molecule; green dashed line, hydrogen bonding between the chitosan network and water molecules.
Fig. 1. Graphical illustration of MNHM etalon and its ingredients. (A) Schematics of MNHM etalon under the humid and dry state of the surrounding. (B) Ligand exchange of AgNPs-OLA transformed to AgNPs-SCN. The aggregated nanoclusters form membrane pores that aid the penetration of gas into the hydrogel layer. Gray circle, Ag NP; dot with zigzag tail, OLA ligand; dot with straight tail, SCN ligand. (C) Swelling/contraction of chitosan hydrogel under the change of humidity condition. Yellow line, chitosan network; blue dot, water molecule; green dashed line, hydrogen bonding between the chitosan network and water molecules.CC BY-NC · PubMed Central
Fig. 2. Optical responses of MNHM etalon. (A) Reflection spectra of MNHM-SCN etalon at RH ranged from 0 to 90%. Dotted line, spectra retrieved from S parameters; dashed line, spectra calculated by FDTD method; solid line, measured spectra. Insets represent calculated and measured color swatches at the same range of RH. a.u., arbitrary units. (B) CIE 1931 color space of the XY values converted from the reflection spectra. (C) The change of thickness of the chitosan layer according to RH that is measured and calculated by AFM and FDTD. (D) SEM and modeled images of AgNPs-SCN slab. The color bar in the modeled one indicates depth information z at each pixel. (E) Effective refractive indices retrieved from S-parameter analysis. Black, real; red, imaginary. The dashed triangle shows the sRGB space. Triangle, S parameters; square, FDTD; circle, measurement. (F) Normalized electric field distribution of MNHM-SCN etalon (i) at the peak of the reflectance, 532 nm, and (ii) at the dip of the reflectance, 676 nm, both under RH 90%.
Fig. 2. Optical responses of MNHM etalon. (A) Reflection spectra of MNHM-SCN etalon at RH ranged from 0 to 90%. Dotted line, spectra retrieved from S parameters; dashed line, spectra calculated by FDTD method; solid line, measured spectra. Insets represent calculated and measured color swatches at the same range of RH. a.u., arbitrary units. (B) CIE 1931 color space of the XY values converted from the reflection spectra. (C) The change of thickness of the chitosan layer according to RH that is measured and calculated by AFM and FDTD. (D) SEM and modeled images of AgNPs-SCN slab. The color bar in the modeled one indicates depth information z at each pixel. (E) Effective refractive indices retrieved from S-parameter analysis. Black, real; red, imaginary. The dashed triangle shows the sRGB space. Triangle, S parameters; square, FDTD; circle, measurement. (F) Normalized electric field distribution of MNHM-SCN etalon (i) at the peak of the reflectance, 532 nm, and (ii) at the dip of the reflectance, 676 nm, both under RH 90%.CC BY-NC · PubMed Central
Fig. 3. Measurement of response/recovery time and repeatability of MNHM sensor. Comparison of (A) response time and (B) recovery time of various resonators. The ratio of real-time intensity ΔI to the intensity in the equilibrium state ΔImax at the resonant wavelength was measured. Black, HM; orange, MNHM-OLA; red, MNHM-SCN; green, MHM. (C) The repeatability test of MNHM-SCN was conducted by measuring real-time intensity under two repeatedly changed states of RH 20 and 80%. Each state was maintained for 10 s and repeated 60 times. Concentration of the chitosan solution, 2%. Spin-coating speed, 2500 rpm.
Fig. 3. Measurement of response/recovery time and repeatability of MNHM sensor. Comparison of (A) response time and (B) recovery time of various resonators. The ratio of real-time intensity ΔI to the intensity in the equilibrium state ΔImax at the resonant wavelength was measured. Black, HM; orange, MNHM-OLA; red, MNHM-SCN; green, MHM. (C) The repeatability test of MNHM-SCN was conducted by measuring real-time intensity under two repeatedly changed states of RH 20 and 80%. Each state was maintained for 10 s and repeated 60 times. Concentration of the chitosan solution, 2%. Spin-coating speed, 2500 rpm.CC BY-NC · PubMed Central
Fig. 4. Humidity-responsive security labels. (A) Side and top views of two QR codes linked to Pohang University of Science and Technology and Electronics and Telecommunications Research Institute webpages. Two QR codes are colored by three types of unit pixels: a humidity-invariant pixel made up of MNP-SiO2-reflector with insulator thickness h1 = 180 nm (pixel 1) and thickness h3 = 280 nm (pixel 3) and a humidity-responsive one made up of MNHM-SCN (pixel 2). (B) The reflection spectrum of the three pixels. Orange solid line, pixel 1; blue solid line, pixel 3. Orange dashed line, pixel 2 under RH 40%; blue dashed line, pixel 2 under RH 85%. (C) Optical images of two QR codes under varied RH conditions. Upper QR codes consist of pixels 1 and 2, and lower ones consist of pixels 2 and 3. Scale bar, 2.5 mm. Insets: Boundary of two different pixels with a scale bar of 400 μm.
Fig. 4. Humidity-responsive security labels. (A) Side and top views of two QR codes linked to Pohang University of Science and Technology and Electronics and Telecommunications Research Institute webpages. Two QR codes are colored by three types of unit pixels: a humidity-invariant pixel made up of MNP-SiO2-reflector with insulator thickness h1 = 180 nm (pixel 1) and thickness h3 = 280 nm (pixel 3) and a humidity-responsive one made up of MNHM-SCN (pixel 2). (B) The reflection spectrum of the three pixels. Orange solid line, pixel 1; blue solid line, pixel 3. Orange dashed line, pixel 2 under RH 40%; blue dashed line, pixel 2 under RH 85%. (C) Optical images of two QR codes under varied RH conditions. Upper QR codes consist of pixels 1 and 2, and lower ones consist of pixels 2 and 3. Scale bar, 2.5 mm. Insets: Boundary of two different pixels with a scale bar of 400 μm.CC BY-NC · PubMed Central
Fig. 5. High-resolution display using MNHM-SCN structures. (A) Pixelated MNHM-SCN etalon with a pixel size of 10 μm (2540 PPI), 5 μm (5080 PPI), and 2 μm (12,700 PPI). (B) Pixelated MNHM etalon (2540 PPI) under RH 0, 70, 80, and 90%. Scale bars, 20 μm.
Fig. 5. High-resolution display using MNHM-SCN structures. (A) Pixelated MNHM-SCN etalon with a pixel size of 10 μm (2540 PPI), 5 μm (5080 PPI), and 2 μm (12,700 PPI). (B) Pixelated MNHM etalon (2540 PPI) under RH 0, 70, 80, and 90%. Scale bars, 20 μm.CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

1 more claim about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 49 references

Cited by

Metadata

Authors
Jung, C., Kim, S.-J., Jang, J., Ko, J. H., Kim, D., Ko, B., Song, Y. M., Hong, S.-H., & Rho, J.
Affiliations
  • Pohang University of Science and Technology (KR)
  • Electronics and Telecommunications Research Institute (KR)
  • Gwangju Institute of Science and Technology (KR)
Corresponding author
  • Jung, Chunghwan
  • Kim, Soo-Jung
  • Jang, Jaehyuck
  • Hong, Sung-Hoon
  • Rho, Junsuk
Venue
Science Advances
Published
2022-03-11
Volume
8
Issue
10
Pages
eabm8598-eabm8598
ISSN
2375-2548 (ISSN-L)
OpenAlex
W4220916748
Cited by
168
References
48
Citations by year
2026: 19 · 2025: 34 · 2024: 53 · 2023: 29 · 2022: 33
FWCI
8.59
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
  • Science Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Fiber Optic Sensors
Keywords
humidity sensor, colorimetric sensor, chitosan hydrogel, Fabry-Perot etalon, gas permeation, high-resolution displays, ultrafast response

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.