Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors.
Open accessThe DOI matches its Crossref record; 286 of the 289 references it cites were found in a registry or an index; 74 of the 284 sources its claims cite were checked for support.
Abstract
Functionalized hydrogels are intrinsically conductive, self-healing, self-adhesive, biocompatible, and room-temperature sensitive.
Overview
CoChat Summary
TL;DR
This review summarizes how hydrogel properties are optimized for wearable gas and humidity sensors, and how these devices work for monitoring gases such as NO2, NH3, O2, CO2, and explosives, as well as humidity. It argues that hydrogels are promising because they can be stretchable, conductive, self-healing, and room-temperature operable, but the field is still in its early stages.
Key findings
- Hydrogels can be engineered for wearable sensing by improving mechanical deformability, conductivity, anti-freezing/water retention, self-healing, biocompatibility, self-adhesion, and transparency.
- For gas sensing, the review highlights reported examples with specific performance values, including NO2 detection limits as low as 4.1 ppb, 1.2 ppb, 0.1 ppb, and 2.23 ppb; NH3 detection limits as low as 0.42 ppm, 0.07 ppm, 0.5 ppm, 50 ppb, and 92 ppb; O2 detection limit as low as 5.7 ppm; and CO2 detection limit of 20 ppm in one hydrogel sensor example.
- For humidity sensing, hydrogels show strong swelling-based and conductivity-based responses, with reported sensitivities including 13,462.1% RH%−1, 78,785.5% RH%−1, and 25,000 to 98% RH operation in one sensor example.
- The review says hydrogel-based wearable sensors have been used for environmental monitoring, healthcare, respiratory monitoring, electronic skin, and wireless monitoring, but still need better selectivity, stability, standardization, and integration.
Methods
- This is a review article, not an experimental study; it systematically summarizes published work on functionalized hydrogel-based wearable gas and humidity sensors.
- The paper organizes the literature by hydrogel design/optimization and by application area: gas sensing, humidity sensing, and wearable use cases such as respiratory monitoring and e-skin.
- Its synthesis is based on reported studies and their performance parameters, with tables and example devices used to compare sensing mechanisms and outcomes.
Limitations
- The paper explicitly states that research on hydrogel-based vapor sensors is still in its infancy and that many practical problems remain.
- It says the gas- and humidity-sensing mechanisms are not yet unified or fully understood, and that factors such as electrode properties, crosslinking method, crosslinking density, and conductivity need further study.
- It notes that most gas-sensor work focuses on NO2, NH3, and O2, so other gases still need exploration.
- Evident from the text: this is a narrative review rather than a systematic meta-analysis, so its comparisons are descriptive and depend on the cited studies rather than a standardized pooled evaluation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Fig. 2 a Schematic of the synthesis of tetra-PEG hydrogel. Reproduced with permission [111]. Copyright 2008, American Chemical Society. b Schematic of the synthesis of DN hydrogels. c Schematic diagram of the synthesis of clay NPs/PNIPAMNC. Reproduced with permission [112]. Copyright 2002, Wiley‐VCH](https://figures.cochat.ai/paper-figures/72093ab1b68c459d8ea4ddaec1e74bf2/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-2.jpg)
![Fig. 3 Main approaches for producing conductive hydrogels. Reproduced with permission [127]. Copyright 2020, Royal Society of Chemistry](https://figures.cochat.ai/paper-figures/7b38192bcd7b4090a9ca09fec386da2c/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-3.jpg)
![Fig. 4 a Encapulation: a1 Schematic diagram of elastomer encapsulated hydrogel; a2 Variation of the weight ratio of hydrogel and hydrogel-elastomer hybrid with time. Reproduced with permission [151]. Copyright 2016, Springer Nature. b Adding hygroscopic salts: b1 Schematic structure of LiBr-PAM/Carr DN hydrogel; b2 Trends in weight of hydrogels with different concentrations of LiBr content over time under room temperature drying environment; b3 DSC spectra of these hydrogels. Reproduced with permission [152]. Copyright 2022, Springer Nature. c Organohydrogel: c1-c2 Schematic diagram of PVA/CNF-Gly preparation method; c3 DSC spectra of the organohydrogels with different CNF contents; c4 Weight trends over time for organic hydrogels with different CNF contents under high temperature and dry conditions. Reproduced with permission [67]. Copyright 2022, Wiley‐VCH](https://figures.cochat.ai/paper-figures/c927de4fce194dd78597af64cfcf985e/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-4.jpg)

![Fig. 6 a Schematic of a simple hydrogel-based gas sensor and its sensing process. Reproduced with permission [67]. Copyright 2023, Wiley‐VCH. b Schematic of the sensing mechanism of hydrogel for NO2 sensing. c SEM image of the Ag anode after prolonged NO2 sensing, indicating the generation of an AgCl layer. d Schematic of the electrode-masking experimental setup. e Real-time current curves of the hydrogel sensor for different NO2 concentrations when the anode or cathode is encapsulated. f Dynamic response curves of the hydrogel sensors with different numbers of Ag electrode turns to different NO2 concentrations. Reproduced with permission [150]. Copyright 2021, Wiley‐VCH. g Effect of anode material change on the sensitivity of hydrogel-based NO2 sensors. Reproduced with permission [69]. Copyright 2022, Royal Society of Chemistry](https://figures.cochat.ai/paper-figures/9018ea86ab934ee1978b6e934929b453/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-6.jpg)
![Fig. 7 a-d Complex impedance plots of the PAA/GA sensor at different humidity values with or without 50 ppm NH3. e Complex impedance plot of the PAA/GA sensor with different NH3 concentrations at 80% RH. f Impedance modulus of the PAA/GA sensors with and without 50 ppm NH3 at different humidity levels. NH3 sensing mechanism of PAA/GA: g at low RH values, h at moderate RH values, and i at high RH values. Reproduced with permission [72]. Copyright 2021, Elsevier](https://figures.cochat.ai/paper-figures/9b88534d02fa4a6491aa2e74bb95e284/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-7.jpg)
![Fig. 8 a Schematic diagram of the selectivity of SnO2/RGOH for NO2. b Diagram of microheater. Reproduced with permission [210]. Copyright 2020, American Chemical Society. c Comparison of the response ability of the original hydrogel and the self-healed hydrogel to NO2. Reproduced with permission [150]. Copyright 2021, Wiley‐VCH. d Schematic of wireless sensing and alarm for NO2. d1-d4 Sensor alarm process for 2 ppm NO2: when the current exceeds the threshold, the red light comes on and the buzzer sounds. d5-d7 Wireless reception of NO2 sensing signals on a smartphone. Reproduced with permission [69]. Copyright 2022, Royal Society of Chemistry. e Real‐time responses of the PVA–CNF DN organohydrogel towards 0.4–2 ppm NO2 at 25, − 10 and − 20 °C. Reproduced with permission [67]. Copyright 2022, Wiley‐VCH. f Structure of self-powered NO2 sensor/power source. g Schematic diagram of self-powered NO2 sensing system. Reproduced with permission [214]. Copyright 2023, Wiley‐VCH](https://figures.cochat.ai/paper-figures/65b1ccfd19bc4de8ac82e3d54b78031c/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-8.jpg)
![Fig. 9 a Response of PAM/CArr DN hydrogel to NH3 in different tensile strains. Reproduced with permission [70]. Copyright 2020, American Chemical Society. b Response (purple column) of PAA/GA sensor to NH3 and other interfering gases. Reproduced with permission [72]. Copyright 2021, Elsevier. c-d NH3 sensing mechanism of PGA/GA sensors: c at low RH values and b at high RH values. Reproduced with permission [71]. Copyright 2020, Elsevierc. e Diagram of the breath testing process for NH3. f Response of hydrogels to exhalation with different NH3 contents. Reproduced with permission [76]. Copyright 2021, Elsevier](https://figures.cochat.ai/paper-figures/0475d7cd26b346dabbafd058c77cc0cc/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-9.jpg)
![Fig. 10 a1 Response to 1% O2 under different tensile strains. a2 Response of original and self-healed organohydrogels to 1% O2. a3 Photographs showing the organohydrogel (marked by the yellow circle) adhered firmly to various materials. a4 Real-time response curve of the sensor to human exhalation in the air. a5 Diagram of the breath testing process for O2. Reproduced with permission [77]. Copyright 2022, Springer Nature. SEM of b1 PI film and b2 hydrogel on artificial skin. b3 Schematic diagram of the tcPO2 sensing device and sensing process. b4 Illustration of placing the sensor on the foot to measure tcPO2. b5-b6 Test results of tcPO2 sensing when the foot is in different states. Reproduced with permission [230]. Copyright 2021, American Association for the Advancement of Science](https://figures.cochat.ai/paper-figures/365b662363f54a78bc8aa1a16c7897d5/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-10.jpg)
![Fig. 11 a-c Diagram of the human olfactory system for olfactory signal transmission. d-f Diagram of the sensing process of the colorimetric hydrogel sensor on the target substance. g Structure and h fabrication of colorimetric hydrogel sensor. Reproduced with permission [250]. Copyright 2020, Wiley–VCH](https://figures.cochat.ai/paper-figures/46866d2d50b846828c9bf29765d9b5bb/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-11.jpg)
![Fig. 12 a Swelling/contraction of CS hydrogel under different humidity conditions. Reproduced with permission [267]. Copyright 2022, American Association for the Advancement of Science. b–d Complex EIS spectra of the humidity sensor under different RH environments. e Dynamic response curves of the thin-film and bulk hydrogels at different RH values. f Variations in the thickness of hydrogel with the spin-coating speed. g Dynamic response curves of the hydrogel films of different thicknesses at different RH values. Reproduced with permission [206]. Copyright 2022, Springer Nature](https://figures.cochat.ai/paper-figures/a0342b1580234e33b5f2c4b2802148cf/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-12.jpg)
![Fig.13 a Optical responses (reflection spectra) of hydrogel sensors in different RH values. b CIE 1931 color space of the XY values converted from the reflection spectra. c Hydrogel sensors for high-resolution displays: the color of the display changes with the ambient humidity. Reproduced with permission [267]. Copyright 2022, American Association for the Advancement of Science. d Responses of the DN hydrogel and EG/Gly-DN organohydrogels to different RH values. e Response of the Gly-DN organohydrogel to low RH values. f Response/recovery time of respiration monitoring. Reproduced with permission [270]. Copyright 2019, Royal Society of Chemistry](https://figures.cochat.ai/paper-figures/9873a3304f064203aeeffefeec1a5ac5/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-13.jpg)
![Fig. 14 Response of the humidity sensor to a regular and b irregular breath. Response to c finger bending, d knee bending at different frequency, e pulse at the wrist and f vocal cord vibration. Reproduced with permission [276]. Copyright 2021, Elsevier. g CGCN sensors identify different patterns of breathing. h Bending finger and i touching intermittently at – 25 °C. Reproduced with permission [78]. Copyright 2021, Elsevier](https://figures.cochat.ai/paper-figures/40cb5ad376ae467299aaddd6327ddb22/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-14.jpg)
![Fig. 15 a1 Comparison of humidity response of film and block hydrogels. a2 Comparison of the response of different sensitive sources. Reproduced with permission [152]. Copyright 2022, Springer Nature. b1 Comparison of the response of different sensitive sources. b2 Schematic diagram of the handheld breath test. b3 Real-time response curve of handheld breath test in different breathing modes. b4 Schematic diagram of the mask breathing test. b5 Real-time response curve of the mask breathing test in different breathing modes. Reproduced with permission [277]. Copyright 2023, Wiley‐VCH. c1-c2 Monitoring of “normal breathing” and “apnea” with smart masks. Reproduced with permission [206]. Copyright 2022, Springer Nature](https://figures.cochat.ai/paper-figures/ac2e3f2673bc418babd183a8a0bd4a15/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-15.jpg)
![Fig. 16 a Output voltage of I-skin at different RH. b Humidity sensitivity of I-skin. c Output voltage of I-skin at 99% RH and 20% RH alternately. d Output voltage variation curve of I-skin under different breathing modes. e Diagram of finger distance perception by I-skin through humidity change. f Variation of output voltage of I-skin at different finger distances. Reproduced with permission [79]. Copyright 2022, American Chemical Society](https://figures.cochat.ai/paper-figures/c8dffc38ba494fb0a5ebbec97965cfc6/functionalized-hydrogel-based-wearable-gas-and-humidity-sensors-figure-16.jpg)
Verification
Claims the paper makes
58 Valid · 11 Not valid · 136 Not checked · 82 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“flammable and explosive gases, such as H2 and CH4, pose a direct threat to the safety of human life and property”
§ Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors > Introduction
What the sources say
- Not checked — no full text of the sourcecites [12] K.-R. Park, H.-B. Cho, J. Lee, Y. Song, W.-B. Kim et al., Design of highly porous SnO2-CuO nanotubes for enhancing H2S gas sensor performance. Sens. Actuator B Chem. 302, 127179 (2020). https://doi.org/10.1016/j.snb.2019.127179 source
- Not checked — no full text of the sourcecites [13] X. Liu, S. Qiao, Y. Ma, Highly sensitive methane detection based on light-induced thermoelastic spectroscopy with a 2.33 µm diode laser and adaptive Savitzky-Golay filtering. Opt. Express 30, 1304 (2022). https://doi.org/10.1364/OE.446294 source
- Not checked — no full text of the sourcecites [14] G.P. Mishra, D. Kumar, V.S. Chaudhary, S. Kumar, Design and sensitivity improvement of microstructured-core photonic crystal fiber based sensor for methane and hydrogen fluoride detection. IEEE Sens. J. 22, 1265 (2022). https://doi.org/10.1109/JSEN.2021.3131694 source
- Not checked — no full text of the sourcecites [15] Y. Chen, P. Xu, X. Li, Y. Ren, Y. Deng, High-performance H2 sensors with selectively hydrophobic micro-plate for self-aligned upload of Pd nanodots modified mesoporous In2O3 sensing-material. Sens. Actuator B Chem. 267, 83 (2018). https://doi.org/10.1016/j.snb.2018.03.180 source
- Partly supportedcites [16] J.-H. Lee, J.-H. Kim, J.-Y. Kim, A. Mirzaei, H.W. Kim et al., Ppb-level selective hydrogen gas detection of Pd-functionalized In2O3-loaded ZnO nanofiber gas sensors. Sensors 19, 4276 (2019). https://doi.org/10.3390/s19194276 sourceExperimental — accuracy not yet measured
The Introduction describes H2 as highly flammable and says an unexpected leak can be catastrophic. It does not address CH4 or its threat to life and property, so the claim is supported only for H2. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [17] C. Dong, M. Jiang, Y. Tao, Y. Shen, Y. Lu et al., Nonaqueous synthesis of Pd-functionalized SnO2/In2O3 nanocomposites for excellent butane sensing properties. Sens. Actuator B Chem. 257, 419 (2018). https://doi.org/10.1016/j.snb.2017.10.175 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“synthetic hydrogels with enhanced mechanical deformability and controlled structure and degradation, such as polyethylene glycol (PEG), polyvinyl alcohol (PVA), poly(2-hydroxyethyl methacrylate) (PHEMA) and polyacrylamide (PAM), can be used in sensors, actuators, soft robots, and wastewater treatment”
§ Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors > Design and Optimization of Hydrogels Hydrogels are classified based on their properties. According to the source, hydrogels can be divided into natural and synthetic hydrogels [85–87]. Natural hydrogels, such as collagen, chitosan (CS), hyaluronic acid, alginate, gelatin, elastin, chondroitin sulfate, and heparin, have excellent biocompatibility, and are used in a wide range of applications, such as bioengineering, medical health, and food processing [88–94]. Nonetheless, their unsatisfactory mechanical deformability, uncontrollable structure, and degradation limit their broader spectrum of applications [48, 49]. Meanwhile, synthetic hydrogels with enhanced mechanical deformability and controlled structure and degradation, such as polyethylene glycol (PEG), polyvinyl alcohol (PVA), poly(2-hydroxyethyl methacrylate) (PHEMA) and polyacrylamide (PAM), can be used in sensors, actuators, soft robots, and wastewater treatment [95–101]. However, synthetic hydrogels have lower biocompatibility than that of natural hydrogels, making them unsuited for health-related applications [48, 49]. According to the different methods of crosslinking polymer chains, they can be divided into physically and chemically crosslinked hydrogels [85–87]. Physically crosslinked hydrogels are formed by various strong/weak intermolecular interactions between polymer chains and usually have poor mechanical deformability, which limit their applications [102–104]. In contrast, chemically crosslinked hydrogels are crosslinked by covalent bonding between polymer chains, resulting in superior mechanical deformability [105–107]. However, the degradation of biocompatibility owing to the residual chemical crosslinkers, organic solvents, and photoinitiators in chemically crosslinked hydrogels limit their usage in biomedical-related applications. Based on the practical application of wearable vapor sensors, large deformability, long-term stability, conductivity, self-healing, high responsiveness, and biocompatibility are desired. As different hydrogels have their own advantages and disadvantages, simple hydrogels cannot meet these complex requirements for stretchable and wearable vapor sensors. Hence, simple hydrogels should be optimized and modified to meet practical application demands. In the recent decades, important advances have focused on the preparation of hydrogels with the modulation of their properties, such as porosity, biocompatibility, electrical conductivity, and mechanical deformability, by different design and optimization approaches to meet different application requirements. In this section, we will briefly introduce some inherent and functionalized properties of hydrogels, and the corresponding design and optimization approaches from the application requirements of flexible wearable vapor sensors to provide possible theoretical support for the design and preparation of gas/humidity sensors for personal health and safety monitoring.
What the sources say
- Not checked — no full text of the sourcecites [95] J. Liu, H. Wang, R. Ou, X. Yi, T. Liu et al., Anti-bacterial silk-based hydrogels for multifunctional electrical skin with mechanical-thermal dual sensitive integration. Chem. Eng. J. 426, 130722 (2021). https://doi.org/10.1016/j.cej.2021.130722 source
- Partly supportedcites [96] X. Liu, Y. Yang, M.E. Inda, S. Lin, J. Wu et al., Magnetic living hydrogels for intestinal localization, retention, and diagnosis. Adv. Funct. Mater. 31, 2010918 (2021). https://doi.org/10.1002/adfm.202010918 sourceExperimental — accuracy not yet measured
The Results and Discussion section describes a PVA magnetic hydrogel with low stiffness and high toughness, and the Abstract reports its use to carry intestinal sensors. The paper does not establish the claimed properties or applications for PEG, PHEMA, or PAM, nor does it address controlled degradation, soft robots, or wastewater treatment. Page numbers are unavailable in our copy. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [97] M.K. Shin, G.M. Spinks, S.R. Shin, S.I. Kim, S.J. Kim, Nanocomposite hydrogel with high toughness for bioactuators. Adv. Mater. 21, 1712 (2009). https://doi.org/10.1002/adma.200802205 source
- Partly supportedcites [98] L. Liu, S. Jiang, Y. Sun, S. Agarwal, Giving direction to motion and surface with ultra-fast speed using oriented hydrogel fibers. Adv. Funct. Mater. 26, 1021 (2016). https://doi.org/10.1002/adfm.201503612 sourceExperimental — accuracy not yet measured
Our copy supports only the actuator/deformation part of the claim: the Abstract and Introduction describe thermoresponsive hydrogel (PNIPAM) bilayer/fibrous actuators undergoing large reversible swelling-driven shape changes, with applications listed as 'encapsulation, microfabrication, robotics, smart drug carrier' and tissue engineering. Nothing in our copy mentions the four named polymers PEG, PVA, PHEMA or PAM (the only hydrogel used is cross-linked P(NIPAM-ABP) with a TPU passive layer), nor controlled structure and degradation, sensors, soft robots as such, or wastewater treatment (searched: 'polyethylene glycol PEG polyvinyl alcohol PVA PHEMA polyacrylamide', 'wastewater treatment adsorption sensors soft robots biodegradable degradation'). The sweeping background statement is therefore only partly carried by this source, and the polymer list, degradation control, sensor and wastewater-treatment applications are unsupported. (LLM, conf=0.62)
- Partly supportedcites [99] J. Odent, S. Vanderstappen, A. Toncheva, E. Pichon, T.J. Wallin et al., Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing. J. Mater. Chem. A 7, 15395 (2019). https://doi.org/10.1039/C9TA03547H sourceExperimental — accuracy not yet measured
Our copy supports only the actuator/controlled-structure part of the claim: the Abstract and Conclusions describe 3D-printed multi-responsive hydrogel actuators with anisotropic swelling, 'rapid and controllable motion' and tunable structure (surface-area-to-volume ratio, crosslinking density, composition). The specific polymer classes the claim attributes to this source — PEG, PVA, PHEMA and PAM — do not appear anywhere in our copy; the paper's hydrogels are PNIPAM and PCEA with MBA crosslinker (Materials; Design and 3D printing of gradient-like structures). Nor does our copy address controlled degradation, sensors, soft robots or wastewater treatment — the applications discussion is limited to bending actuation and gripper demonstrations (Fig. 5) plus a generic 'wide range of technological applications' (Conclusions). (LLM, conf=0.72)
- Partly supportedcites [100] J. Liu, S. Lin, X. Liu, Z. Qin, Y. Yang et al., Fatigue-resistant adhesion of hydrogels. Nat. Commun. 11, 1071 (2020). https://doi.org/10.1038/s41467-020-14871-3 sourceExperimental — accuracy not yet measured
The Introduction and Results describe PVA hydrogels with tunable crystallinity and use polyacrylamide hydrogels as controls. The Discussion proposes durable hydrogel coatings for devices, including interfaces with robots. Our copy does not support the full list of PEG and PHEMA, controlled degradation, or the claimed uses in sensors, actuators, soft robots, and wastewater treatment. (LLM, conf=0.86)
- Partly supportedcites [101] H. Lei, L. Dong, Y. Li, J. Zhang, H. Chen et al., Stretchable hydrogels with low hysteresis and anti-fatigue fracture based on polyprotein cross-linkers. Nat. Commun. 11, 4032 (2020). https://doi.org/10.1038/s41467-020-17877-z sourceExperimental — accuracy not yet measured
The Discussion (page not specified) reports highly stretchable engineered hydrogels and identifies sensors, actuators, and soft robotics as potential applications. The Results describe PEG- and polyacrylamide-based hydrogels, but the cited passages do not support the inclusion of PVA or PHEMA, controlled degradation, or wastewater treatment. (LLM, conf=0.87)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“hydrogels can be functionalized to achieve specific properties and structures”
§ Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors > Introduction
What the sources say
- Not checked — no full text of the sourcecites [64] W. Huang, S. Cheng, X. Wang, Y. Zhang, L. Chen et al., Noncompressible hemostasis and bone regeneration induced by an absorbable bioadhesive self-healing hydrogel. Adv. Funct. Mater. 31, 2009189 (2021). https://doi.org/10.1002/adfm.202009189 source
- Supportedcites [65] E. Caló, V.V. Khutoryanskiy, Biomedical applications of hydrogels: A review of patents and commercial products. Eur. Polym. J. 65, 252 (2015). https://doi.org/10.1016/j.eurpolymj.2014.11.024 source
The Introduction (Sec. 1) states that hydrogel networks 'may be charged or non-charged depending on the nature of functional groups present in their structure', and that these groups dictate swelling and shape-response behaviour, i.e. properties set by the chemistry introduced into the network. The review repeatedly illustrates functionalization to obtain particular structures and properties: derivatized phenylboronate ligands complexed with poly(vinyl alcohol) to give saccharide-degradable cell-culture scaffolds (Sec. 5, Kumar), AgNO3-incorporated nanofibre networks with 'unique mechanical properties and adjustable swelling ratios' for antimicrobial wound dressings (Sec. 3), and stimuli-responsive cross-linked copolymers for self-regulated drug delivery (Sec. 4). The wording 'functionalized' is not used verbatim, but our copy clearly treats the topic that way, so the broad background claim is supported. (LLM, conf=0.85)
- Supportedcites [66] P. Thoniyot, M.J. Tan, A.A. Karim, D.J. Young, X.J. Loh, Nanoparticle–hydrogel composites: Concept, design, and applications of these promising, multi-functional materials. Adv. Sci. 2, 1400010 (2015). https://doi.org/10.1002/advs.201400010 source
The Introduction says that combining nanoparticles with hydrogels generates structural diversity and property enhancements. The Design, Synthesis, and Properties section gives examples of changing gel morphology and tuning properties through nanoparticle cross-linking. No page numbers are provided in our copy. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
§ Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors > Design and Optimization of Hydrogels Hydrogels are classified based on their properties. According to the source, hydrogels can be divided into natural and synthetic hydrogels [85–87]. Natural hydrogels, such as collagen, chitosan (CS), hyaluronic acid, alginate, gelatin, elastin, chondroitin sulfate, and heparin, have excellent biocompatibility, and are used in a wide range of applications, such as bioengineering, medical health, and food processing [88–94]. Nonetheless, their unsatisfactory mechanical deformability, uncontrollable structure, and degradation limit their broader spectrum of applications [48, 49]. Meanwhile, synthetic hydrogels with enhanced mechanical deformability and controlled structure and degradation, such as polyethylene glycol (PEG), polyvinyl alcohol (PVA), poly(2-hydroxyethyl methacrylate) (PHEMA) and polyacrylamide (PAM), can be used in sensors, actuators, soft robots, and wastewater treatment [95–101]. However, synthetic hydrogels have lower biocompatibility than that of natural hydrogels, making them unsuited for health-related applications [48, 49]. According to the different methods of crosslinking polymer chains, they can be divided into physically and chemically crosslinked hydrogels [85–87]. Physically crosslinked hydrogels are formed by various strong/weak intermolecular interactions between polymer chains and usually have poor mechanical deformability, which limit their applications [102–104]. In contrast, chemically crosslinked hydrogels are crosslinked by covalent bonding between polymer chains, resulting in superior mechanical deformability [105–107]. However, the degradation of biocompatibility owing to the residual chemical crosslinkers, organic solvents, and photoinitiators in chemically crosslinked hydrogels limit their usage in biomedical-related applications. Based on the practical application of wearable vapor sensors, large deformability, long-term stability, conductivity, self-healing, high responsiveness, and biocompatibility are desired. As different hydrogels have their own advantages and disadvantages, simple hydrogels cannot meet these complex requirements for stretchable and wearable vapor sensors. Hence, simple hydrogels should be optimized and modified to meet practical application demands. In the recent decades, important advances have focused on the preparation of hydrogels with the modulation of their properties, such as porosity, biocompatibility, electrical conductivity, and mechanical deformability, by different design and optimization approaches to meet different application requirements. In this section, we will briefly introduce some inherent and functionalized properties of hydrogels, and the corresponding design and optimization approaches from the application requirements of flexible wearable vapor sensors to provide possible theoretical support for the design and preparation of gas/humidity sensors for personal health and safety monitoring. > Mechanical Deformability
What the sources say
- Not checked — no full text of the sourcecites [123] D. Chimene, R. Kaunas, A.K. Gaharwar, Hydrogel bioink reinforcement for additive manufacturing: a focused review of emerging strategies. Adv. Mater. 32, 1902026 (2020). https://doi.org/10.1002/adma.201902026 source
- Supportedcites [124] T.L. Sun, T. Kurokawa, S. Kuroda, A.B. Ihsan, T. Akasaki et al., Physical hydrogels composed of polyampholytes demonstrate high toughness and viscoelasticity. Nat. Mater. 12, 932 (2013). https://doi.org/10.1038/nmat3713 source
Split into 2 atoms — 2 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
- Not checked — no full text of the sourcecites [125] S. Xia, S. Song, G. Gao, Robust and flexible strain sensors based on dual physically cross-linked double network hydrogels for monitoring human-motion. Chem. Eng. J. 354, 817 (2018). https://doi.org/10.1016/j.cej.2018.08.053 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The biodegradability of the hydrogels can be regulated by adjusting the PACG/Gelma ratio”
§ Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors > Design and Optimization of Hydrogels Hydrogels are classified based on their properties. According to the source, hydrogels can be divided into natural and synthetic hydrogels [85–87]. Natural hydrogels, such as collagen, chitosan (CS), hyaluronic acid, alginate, gelatin, elastin, chondroitin sulfate, and heparin, have excellent biocompatibility, and are used in a wide range of applications, such as bioengineering, medical health, and food processing [88–94]. Nonetheless, their unsatisfactory mechanical deformability, uncontrollable structure, and degradation limit their broader spectrum of applications [48, 49]. Meanwhile, synthetic hydrogels with enhanced mechanical deformability and controlled structure and degradation, such as polyethylene glycol (PEG), polyvinyl alcohol (PVA), poly(2-hydroxyethyl methacrylate) (PHEMA) and polyacrylamide (PAM), can be used in sensors, actuators, soft robots, and wastewater treatment [95–101]. However, synthetic hydrogels have lower biocompatibility than that of natural hydrogels, making them unsuited for health-related applications [48, 49]. According to the different methods of crosslinking polymer chains, they can be divided into physically and chemically crosslinked hydrogels [85–87]. Physically crosslinked hydrogels are formed by various strong/weak intermolecular interactions between polymer chains and usually have poor mechanical deformability, which limit their applications [102–104]. In contrast, chemically crosslinked hydrogels are crosslinked by covalent bonding between polymer chains, resulting in superior mechanical deformability [105–107]. However, the degradation of biocompatibility owing to the residual chemical crosslinkers, organic solvents, and photoinitiators in chemically crosslinked hydrogels limit their usage in biomedical-related applications. Based on the practical application of wearable vapor sensors, large deformability, long-term stability, conductivity, self-healing, high responsiveness, and biocompatibility are desired. As different hydrogels have their own advantages and disadvantages, simple hydrogels cannot meet these complex requirements for stretchable and wearable vapor sensors. Hence, simple hydrogels should be optimized and modified to meet practical application demands. In the recent decades, important advances have focused on the preparation of hydrogels with the modulation of their properties, such as porosity, biocompatibility, electrical conductivity, and mechanical deformability, by different design and optimization approaches to meet different application requirements. In this section, we will briefly introduce some inherent and functionalized properties of hydrogels, and the corresponding design and optimization approaches from the application requirements of flexible wearable vapor sensors to provide possible theoretical support for the design and preparation of gas/humidity sensors for personal health and safety monitoring. > Other Properties
What the sources say
- Supportedcites [200] F. Gao, Z. Xu, Q. Liang, H. Li, L. Peng et al., Osteochondral regeneration with 3d-printed biodegradable high-strength supramolecular polymer reinforced-gelatin hydrogel scaffolds. Adv. Sci. 6, 1900867 (2019). https://doi.org/10.1002/advs.201900867 source
The Results and Discussion section (Preparation and Characterization of PACG-GelMA Hydrogels, Figure 2) reports that changing ACG or GelMA content changes the hydrogels’ degradation rate. This supports regulating biodegradability through their formulation ratio; the reported degradation test was conducted in collagenase solution. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
108 more claims · 18 with their cited sources checked
Create a free account to see all 287 claims and to verify the 24 references still open.
- It may state two separate claims as one. 159
- Probably not a substantial claim. 29
- The quote only partly states this claim. 1
Citations
Cites
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800 · cited 1×
“The hydrophilic functional groups on the polymer backbone endows the water absorption of hydrogels, whereas the crosslinking between the polymer network chains resist dissolution [53].”
BackgroundHydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Functional Hydrogels as Wound Dressing to Enhance Wound Healing
Liang, Y., He, J., & Guo, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c04206 · Cited by 3,135 · cited 2×
“However, synthetic hydrogels have lower biocompatibility than that of natural hydrogels, making them unsuited for health-related applications [48, 49].”
BackgroundHydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908 · cited 1×
“However, conventional hydrogels have low mechanical deformability with a small fracture energy, low elastic modulus, and brittleness, which does not meet the large mechanical deformability demand for flexible and wearable vapor sensors [108–110].”
BackgroundBiomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Physical hydrogels composed of polyampholytes demonstrate high toughness and viscoelasticity
Sun, T. L., Kurokawa, T., Kuroda, S., Ihsan, A. B., Akasaki, T., Sato, K., Haque, M. A., Nakajima, T., & Gong, J. P. (2013) · Nature Materials · doi:10.1038/nmat3713 · Cited by 2,089
Cited by
Sun, T., Feng, B., Huo, J., Xiao, Y., Wang, W., Peng, J., Li, Z., Du, C., Wang, W., Zou, G., et al. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01235-x · Cited by 384
Smart Gas Sensors: Recent Developments and Future Prospective
Zong, B., Wu, S., Yang, Y., Li, Q., Tao, T., & Mao, S. (2025) · Nano-Micro Letters · doi:10.1007/s40820-024-01543-w · Cited by 282
Mei, H., Peng, J., Wang, T., Zhou, T., Zhao, H., Zhang, T., & Yang, Z. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01489-z · Cited by 177
The Challenges and Opportunities for TiO2 Nanostructures in Gas Sensing
Zhao, J., Wang, H., Cai, Y., Zhao, J., Gao, Z., & Song, Y.-Y. (2024) · ACS Sensors · doi:10.1021/acssensors.4c00137 · Cited by 164
Self-citationAdvances in ionic conductive hydrogels for skin sensor applications
Mo, F., Lin, Y., Liu, Y., Zhou, P., Yang, J., Ji, Z., & Wang, Y. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.100989 · Cited by 160
Metadata
- Authors
- Luo, Y., Li, J., Ding, Q., Wang, H., Liu, C., & Wu, J.
- Affiliations
- Sun Yat-sen University (CN)
- Corresponding author
- Wu, Jin
- Venue
- Nano-Micro Letters
- Published
- 2023-05-24
- Volume
- 15
- Issue
- 1
- Pages
- 136-136
- ISSN
- 2150-5551 (ISSN-L)
- 2311-6706
- PMC
- PMC10209388
- OpenAlex
- W4378070105
- Cited by
- 236
- References
- 289
- Citations by year
- 2026: 55 · 2025: 97 · 2024: 68 · 2023: 16
- FWCI
- 3.97
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Nano-Micro Letters (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Shanghai Jiao Tong University
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Gas Sensing Nanomaterials and Sensors
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- hydrogel-based sensors, wearable sensors, gas sensors, humidity sensor, vapor sensing, functionalized hydrogels, personal health monitoring, self-healing hydrogels, stretchable sensors, home health care
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. https://app.cochat.ai/papers/10.1007/s40820-023-01109-2
- The paper
- Luo, Y., Li, J., Ding, Q., Wang, H., Liu, C., & Wu, J. (2023). Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. Nano-Micro Letters. https://doi.org/10.1007/s40820-023-01109-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.