The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography
Abstract
Subwavelength Patterning: Microscopists have recently achieved fluorescence imaging at subwavelength resolution by focusing one beam of light in a halo around another beam, thereby quenching the glow of fluorescent dyes in all but the very center of the illuminated spot. Three studies have now adapted this approach to photolithography (see the Perspective by Perry ). Andrew et al. (p. 917 , published online 9 April) coated a photo-resist with molecules that, upon absorbing the ultraviolet etching beam, isomerized to a transparent layer but returned to the initially opaque form upon absorption of visible light. Applying an interference pattern with ultraviolet peaks superimposed on visible nodes restricted etching to narrow regions in the center of these nodes, yielding lines of subwavelength width. Scott et al. (p. 913 , published online 9 April) used a central beam to activate polymerization initiators, while using a halo-shaped surrounding beam to trigger inhibitors that would halt polymerization. Li et al. (p. 910 , published online 9 April) found that use of a different initiator molecule allowed both beams to share the same wavelength (800 nanometers), with a relatively weak quenching beam lagging a highly intense initiating beam slightly in time. Both the latter techniques produced three-dimensional features honed to subwavelength dimensions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Linear Viscoelasticity at the Gel Point of a Crosslinking PDMS with Imbalanced Stoichiometry
Chambon, F., & Winter, H. H. (1987) · Journal of Rheology · doi:10.1122/1.549955 · Cited by 1,246
Macromolecular-scale resolution in biological fluorescence microscopy
Donnert, G., Keller, J., Medda, R., Andrei, M. A., Rizzoli, S. O., Lührmann, R., Jahn, R., Eggeling, C., & Hell, S. W. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0604965103 · Cited by 527
Arlt, J., & Padgett, M. J. (2000) · Optics Letters · doi:10.1364/ol.25.000191 · Cited by 438
Two-Photon Photopolymerization and 3D Lithographic Microfabrication
Sun, H.-B., & Kawata, S. (2006) · Advances in Polymer Science · doi:10.1007/b94405 · Cited by 380
65 nm feature sizes using visible wavelength 3-D multiphoton lithography
Haske, W., Chen, V. W., Hales, J. M., Dong, W., Barlow, S., Marder, S. R., & Perry, J. W. (2007) · Optics Express · doi:10.1364/oe.15.003426 · Cited by 319
Rapid sub-diffraction-limit laser micro/nanoprocessing in a threshold material system
Tanaka, T., Sun, H.-B., & Kawata, S. (2002) · Applied Physics Letters · doi:10.1063/1.1432450 · Cited by 216
Sun, H.-B., Kawakami, T., Xu, Y., Ye, J.-Y., Matuso, S., Misawa, H., Miwa, M., & Kaneko, R. (2000) · Optics Letters · doi:10.1364/ol.25.001110 · Cited by 161
Three-dimensional direct-write lithography into photopolymer
Sullivan, A. C., Grabowski, M. W., & McLeod, R. R. (2007) · Applied Optics · doi:10.1364/ao.46.000295 · Cited by 84
Self-citation
Cited by
Three‐dimensional optical laser lithography beyond the diffraction limit
Fischer, J., & Wegener, M. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201100046 · Cited by 709
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
Optical storage arrays: a perspective for future big data storage
Gu, M., Li, X., & Cao, Y. (2014) · Light: Science & Applications · doi:10.1038/lsa.2014.58 · Cited by 542
Xolography for linear volumetric 3D printing
Regehly, M., Garmshausen, Y., Reuter, M., König, N. F., Israel, E., Kelly, D. P., Chou, C.-Y., Koch, K., Asfari, B., & Hecht, S. (2020) · Nature · doi:10.1038/s41586-020-3029-7 · Cited by 527
Metadata
- Authors
- Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N., & McLeod, R. R.
- Venue
- Science
- Published
- 2009-05-15
- Volume
- 324
- Issue
- 5929
- Pages
- 913-917
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2050884664
- Cited by
- 421
- References
- 12
- FWCI
- 19.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography. https://app.cochat.ai/papers/10.1126/science.1167610
- The paper
- Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N., & McLeod, R. R. (2009). Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography. Science. https://doi.org/10.1126/science.1167610
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.