The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Open accessAbstract
If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat–stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact. The resulting inverted PSCs deliver a 24.3% PCE and retain >95% of their initial value after >1000 hours at damp-heat test conditions, thereby meeting one of the critical industrial stability standards for PV modules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Al-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Self-citationStabilizing perovskite-substrate interfaces for high-performance perovskite modules
Chen, S., Dai, X., Xu, S., Jiao, H., Zhao, L., & Huang, J. (2021) · Science · doi:10.1126/science.abi6323 · Cited by 910
Solar cell efficiency tables (Version 53)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., Yoshita, M., & Ho‐Baillie, A. W. Y. (2019) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3102 · Cited by 764
Color-stable highly luminescent sky-blue perovskite light-emitting diodes
Xing, J., Zhao, Y., Askerka, M., Quan, L. N., Gong, X., Zhao, W., Zhao, J., Tan, H., Long, G., Gao, L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05909-8 · Cited by 720
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Self-citationIntact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells
Shi, L., Bucknall, M. P., Young, T. L., Zhang, M., Hu, L., Bing, J., Lee, D. S., Kim, J., Wu, T., Takamure, N., et al. (2020) · Science · doi:10.1126/science.aba2412 · Cited by 488
Charge transfer rates and electron trapping at buried interfaces of perovskite solar cells
Levine, I., Al-Ashouri, A., Musiienko, A., Hempel, H., Magomedov, A., Drevilkauskaite, A., Getautis, V., Menzel, D., Hinrichs, K., Unold, T., et al. (2021) · Joule · doi:10.1016/j.joule.2021.07.016 · Cited by 461
Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation
Yang, G., Ren, Z., Liu, K., Qin, M., Deng, W., Zhang, H., Wang, H., Liang, J., Ye, F., Liang, Q., et al. (2021) · Nature Photonics · doi:10.1038/s41566-021-00829-4 · Cited by 417
Self-citationNanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells
Peng, J., Walter, D., Ren, Y., Tebyetekerwa, M., Wu, Y., Duong, T., Lin, Q., Li, J., Lu, T., Mahmud, M. A., et al. (2021) · Science · doi:10.1126/science.abb8687 · Cited by 409
Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Yao, Q., Xue, Q., Li, Z., Zhang, K., Zhang, T., Li, N., Yang, S., Brabec, C. J., Yip, H., & Cao, Y. (2020) · Advanced Materials · doi:10.1002/adma.202000571 · Cited by 227
Matsui, T., Yamamoto, T., Nishihara, T., Morisawa, R., Yokoyama, T., Sekiguchi, T., & Negami, T. (2019) · Advanced Materials · doi:10.1002/adma.201806823 · Cited by 222
Aktas, E., Phung, N., Köbler, H., González, D. A., Méndez, M., Kafedjiska, I., Turren‐Cruz, S., Wenisch, R., Lauermann, I., Abate, A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03807e · Cited by 207
Multication perovskite 2D/3D interfaces form via progressive dimensional reduction
Proppe, A. H., Johnston, A., Teale, S., Mahata, A., Quintero-Bermudez, R., Jung, E. H., Grater, L., Cui, T., Filleter, T., Kim, C.-Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23616-9 · Cited by 204
Strain-activated light-induced halide segregation in mixed-halide perovskite solids
Zhao, Y., Miao, P., Elia, J., Hu, H., Wang, X., Heumueller, T., Hou, Y., Matt, G. J., Osvet, A., Chen, Y.-T., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-20066-7 · Cited by 175
Self-citationProppe, A. H., Wei, M., Chen, B., Quintero-Bermudez, R., Kelley, S. O., & Sargent, E. H. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b05083 · Cited by 160
Aydın, E., Liu, J., Ugur, E., Azmi, R., Harrison, G. T., Hou, Y., Chen, B., Zhumagali, S., Bastiani, M. D., Wang, M., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01206a · Cited by 148
Self-citationEnergetics and Energy Loss in 2D Ruddlesden–Popper Perovskite Solar Cells
Yang, J., Xiong, S., Song, J., Wu, H., Zeng, Y., Lu, L., Shen, K., Hao, T., Ma, Z., Liu, F., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000687 · Cited by 108
Cited by
Double-side 2D/3D heterojunctions for inverted perovskite solar cells
Azmi, R., Utomo, D. S., Vishal, B., Zhumagali, S., Dally, P., Risqi, A. M., Prasetio, A., Ugur, E., Cao, F., Imran, I. F., et al. (2024) · Nature · doi:10.1038/s41586-024-07189-3 · Cited by 452
Self-citationLi, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Zhou, Y., Herz, L. M., Jen, A. K.-Y., & Saliba, M. (2022) · Nature Energy · doi:10.1038/s41560-022-01096-5 · Cited by 281
Stability of 2D and quasi-2D perovskite materials and devices
Leung, T. L., Ahmad, I., Syed, A. A., Ng, A. M. C., Popović, J., & Djurišić, A. B. (2022) · Communications Materials · doi:10.1038/s43246-022-00285-9 · Cited by 279
Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., et al. (2024) · Science · doi:10.1126/science.adn9453 · Cited by 152
Metadata
- Authors
- Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., Chen, Y., Xu, F., Allen, T. G., Rehman, A. U., Wang, C.-L., Anthopoulos, T. D., Schwingenschlögl, U., De Bastiani, M., Aydin, E., & De Wolf, S.
- Venue
- Science
- Published
- 2022-04
- Volume
- 376
- Issue
- 6588
- Pages
- 73-77
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4213346436
- Cited by
- 855
- References
- 34
- FWCI
- 49.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.