The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion
Open accessAbstract
Porosity defects are currently a major factor that hinders the widespread adoption of laser-based metal additive manufacturing technologies. One common porosity occurs when an unstable vapor depression zone (keyhole) forms because of excess laser energy input. With simultaneous high-speed synchrotron x-ray imaging and thermal imaging, coupled with multiphysics simulations, we discovered two types of keyhole oscillation in laser powder bed fusion of Ti-6Al-4V. Amplifying this understanding with machine learning, we developed an approach for detecting the stochastic keyhole porosity generation events with submillisecond temporal resolution and near-perfect prediction rate. The highly accurate data labeling enabled by operando x-ray imaging allowed us to demonstrate a facile and practical way to adopt our approach in commercial systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Grad-CAM: Visual Explanations from Deep Networks via Gradient-Based Localization
Selvaraju, R. R., Cogswell, M., Das, A., Vedantam, R., Parikh, D., & Batra, D. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.74 · Cited by 24,513
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Refaeilzadeh, P., Tang, L., & Liu, H. (2009) · Encyclopedia of Database Systems · doi:10.1007/978-0-387-39940-9_565 · Cited by 1,549
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Self-citationProcess defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
Critical instability at moving keyhole tip generates porosity in laser melting
Zhao, C., Parab, N. D., Li, X., Fezzaa, K., Tan, W., Rollett, A. D., & Sun, T. (2020) · Science · doi:10.1126/science.abd1587 · Cited by 673
Self-citationFluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
Khairallah, S. A., Martin, A. A., Lee, J. R. I., Guss, G., Calta, N. P., Hammons, J. A., Nielsen, M. H., Chaput, K., Schwalbach, E., Shah, M. N., et al. (2020) · Science · doi:10.1126/science.aay7830 · Cited by 506
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
ECG Classification Using Wavelet Packet Entropy and Random Forests
Li, T., & Zhou, M. (2016) · Entropy · doi:10.3390/e18080285 · Cited by 478
A model of deep penetration laser welding based on calculation of the keyhole profile
Kaplan, A. F. H. (1994) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/27/9/002 · Cited by 406
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole
Cho, J.-H., & Na, S.-J. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/24/039 · Cited by 332
Fabbro, R., Slimani, S., Doudet, I., Coste, F., & Briand, F. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/2/023 · Cited by 199
Crystal symmetry determination in electron diffraction using machine learning
Kaufmann, K., Zhu, C., Rosengarten, A. S., Maryanovsky, D., Harrington, T. J., Marin, E., & Vecchio, K. S. (2020) · Science · doi:10.1126/science.aay3062 · Cited by 168
Smoqi, Z., Gaikwad, A., Bevans, B. D., Kobir, M. H., Craig, J. E., Abul-Haj, A., Peralta, A. D., & Rao, P. (2022) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2022.117550 · Cited by 147
Shevchik, S. A., Le‐Quang, T., Meylan, B., Vakili-Farahani, F., Olbinado, M. P., Rack, A., Masinelli, G., Leinenbach, C., & Wasmer, K. (2020) · Scientific Reports · doi:10.1038/s41598-020-60294-x · Cited by 138
Bulk-Explosion-Induced Metal Spattering During Laser Processing
Zhao, C., Guo, Q., Li, X., Parab, N. D., Fezzaa, K., Tan, W., Chen, L., & Sun, T. (2019) · Physical Review X · doi:10.1103/physrevx.9.021052 · Cited by 134
Self-citationDrissi-Daoudi, R., Pandiyan, V., Logé, R. E., Shevchik, S. A., Masinelli, G., Ghasemi‐Tabasi, H., Parrilli, A., & Wasmer, K. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2028380 · Cited by 119
Tempelman, J. R., Wachtor, A. J., FLYNN, E. B., Depond, P. J., Forien, J., Guss, G. M., Calta, N. P., & Matthews, M. J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102735 · Cited by 119
Guo, W., Tian, Q., Guo, S., et al. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.04.049 · Cited by 97
In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging
Gould, B., Wolff, S. J., Parab, N. D., Zhao, C., Lorenzo-Martin, M. C., Fezzaa, K., Greco, A. C., & Sun, T. (2020) · JOM · doi:10.1007/s11837-020-04291-5 · Cited by 96
Self-citationAn open-architecture metal powder bed fusion system for in-situ process measurements
Bidare, P., Maier, R. R. J., Beck, R. J., Shephard, J. D., & Moore, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.007 · Cited by 91
Caprio, L., Demir, A. G., & Previtali, B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101470 · Cited by 68
Meng, W., Yin, X., Fang, J., Guo, L., Ma, Q., & Li, Z. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.07.073 · Cited by 50
Kantzos, C., Lao, J., & Rollett, A. D. (2019) · Materials Characterization · doi:10.1016/j.matchar.2019.109961 · Cited by 34
Self-citationModel Validation, Machine Learning
Wang, H., & Zheng, H. (2013) · Springer eBooks · doi:10.1007/978-1-4419-9863-7_233 · Cited by 19
Cited by
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Ren, Z., Gao, L., Clark, S. J., Fezzaa, K., Shevchenko, P., Choi, A., Everhart, W., Rollett, A. D., Chen, L., & Sun, T.
- Venue
- Science
- Published
- 2023-01-06
- Volume
- 379
- Issue
- 6627
- Pages
- 89-94
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4313555724
- Cited by
- 326
- References
- 34
- FWCI
- 32.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.