The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Abstract
Controlling the perovskite morphology and defects at the buried perovskite-substrate interface is challenging for inverted perovskite solar cells. In this work, we report an amphiphilic molecular hole transporter, (2-(4-(bis(4-methoxyphenyl)amino)phenyl)-1-cyanovinyl)phosphonic acid, that features a multifunctional cyanovinyl phosphonic acid group and forms a superwetting underlayer for perovskite deposition, which enables high-quality perovskite films with minimized defects at the buried interface. The resulting perovskite film has a photoluminescence quantum yield of 17% and a Shockley-Read-Hall lifetime of nearly 7 microseconds and achieved a certified power conversion efficiency (PCE) of 25.4% with an open-circuit voltage of 1.21 volts and a fill factor of 84.7%. In addition, 1–square centimeter cells and 10–square centimeter minimodules show PCEs of 23.4 and 22.0%, respectively. Encapsulated modules exhibited high stability under both operational and damp heat test conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Payne, M. C., Teter, M. P., Allan, D. C., Arias, T. A., & Joannopoulos, J. D. (1992) · Reviews of Modern Physics · doi:10.1103/revmodphys.64.1045 · Cited by 9,728
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Chemical accuracy for the van der Waals density functional
Klimeš, J., Bowler, D. R., & Michaelides, A. (2010) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/22/2/022201 · Cited by 3,587
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Self-citationKhenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citationEfficient stochastic generation of special quasirandom structures
van de Walle, A., Tiwary, P., de Jong, M., Olmsted, D. L., Asta, M., Dick, A., Shin, D., Wang, Y., Chen, L.-Q., & Liu, Z.-K. (2013) · Calphad · doi:10.1016/j.calphad.2013.06.006 · Cited by 1,648
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells
Ni, Z., Bao, C., Liu, Y., Jiang, Q., Wu, W.-Q., Chen, S., Dai, X., Chen, B., Hartweg, B., Yu, Z., et al. (2020) · Science · doi:10.1126/science.aba0893 · Cited by 1,302
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Self-citationAl-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Self-citationElectronic properties of random alloys: Special quasirandom structures
Wei, S.-H., Ferreira, L. G., Bernard, J. E., & Zunger, A. (1990) · Physical Review B · doi:10.1103/physrevb.42.9622 · Cited by 1,064
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Self-citationStolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Self-citationStolterfoht, M., Caprioglio, P., Wolff, C. M., Márquez, J. A., Nordmann, J., Zhang, S., Rothhardt, D., Hörmann, U., Amir, Y., Redinger, A., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02020a · Cited by 966
Self-citationStabilizing perovskite-substrate interfaces for high-performance perovskite modules
Chen, S., Dai, X., Xu, S., Jiao, H., Zhao, L., & Huang, J. (2021) · Science · doi:10.1126/science.abi6323 · Cited by 910
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Self-citationLi, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Stability-limiting heterointerfaces of perovskite photovoltaics
Tan, S., Huang, T., Yavuz, I., Wang, R., Yoon, T. W., Xu, M., Xing, Q., Park, K., Lee, D.-K., Chen, C.-H., et al. (2022) · Nature · doi:10.1038/s41586-022-04604-5 · Cited by 590
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
Chen, H., Teale, S., Chen, B., Hou, Y., Grater, L., Zhu, T., Bertens, K., Park, S. M., Atapattu, H. R., Gao, Y., et al. (2022) · Nature Photonics · doi:10.1038/s41566-022-00985-1 · Cited by 588
Self-citationPhotoluminescence‐Based Characterization of Halide Perovskites for Photovoltaics
Kirchartz, T., Márquez, J. A., Stolterfoht, M., & Unold, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904134 · Cited by 572
Self-citationLi, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Self-citationGurtovenko, A. A., & Anwar, J. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp073113e · Cited by 480
23.7% Efficient inverted perovskite solar cells by dual interfacial modification
Degani, M., An, Q., Albaladejo-Siguan, M., Hofstetter, Y. J., Cho, C., Paulus, F., Grancini, G., & Vaynzof, Y. (2021) · Science Advances · doi:10.1126/sciadv.abj7930 · Cited by 446
Buried Interfaces in Halide Perovskite Photovoltaics
Yang, X., Luo, D., Xiang, Y., Zhao, L., Anaya, M., Shen, Y., Wu, J., Yang, W., Chiang, Y., Tu, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006435 · Cited by 443
2D metal–organic framework for stable perovskite solar cells with minimized lead leakage
Wu, S., Li, Z., Li, M.-Q., Diao, Y., Lin, F., Liu, T., Zhang, J., Tieu, P., Gao, W., Qi, F., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0765-7 · Cited by 397
Wu, S., Zhang, J., Li, Z., Liu, D., Qin, M., Cheung, S. H., Lu, X., Lei, D., So, S. K., Zhu, Z., et al. (2020) · Joule · doi:10.1016/j.joule.2020.04.001 · Cited by 388
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Cao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Self-citationIodine reduction for reproducible and high-performance perovskite solar cells and modules
Chen, S., Xiao, X., Gu, H., & Huang, J. (2021) · Science Advances · doi:10.1126/sciadv.abe8130 · Cited by 312
Halide Segregation versus Interfacial Recombination in Bromide-Rich Wide-Gap Perovskite Solar Cells
Peña-Camargo, F., Caprioglio, P., Zu, F., Gutierrez-Partida, E., Wolff, C. M., Brinkmann, K., Albrecht, S., Riedl, T., Koch, N., Neher, D., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01104 · Cited by 199
Self-citationAchieving Large‐Area Planar Perovskite Solar Cells by Introducing an Interfacial Compatibilizer
Lee, J., Kang, H., Kim, G., Back, H., Kim, J., Hong, S., Park, B., Lee, E., & Lee, K. (2017) · Advanced Materials · doi:10.1002/adma.201606363 · Cited by 190
Chen, B., Chen, H., Hou, Y., Xu, J., Teale, S., Bertens, K., Chen, H., Proppe, A. H., Zhou, Q., Yu, D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202103394 · Cited by 167
Self-citationWu, T., Ono, L. K., Yoshioka, R., Ding, C., Zhang, C., Mariotti, S., Zhang, J., Mitrofanov, K., Liu, X., Segawa, H., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee01801b · Cited by 163
Self-citationZhu, Z., Mao, K., Zhang, K., Peng, W., Zhang, J., Meng, H., Cheng, S., Li, T., Lin, H., Chen, Q. H., et al. (2022) · Joule · doi:10.1016/j.joule.2022.10.007 · Cited by 160
Cao, Q., Yang, J., Wang, T., Li, Y., Pu, X., Zhao, J., Zhang, Y., Zhou, H., Li, X., & Li, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01800k · Cited by 155
Self-citationCacovich, S., Vidon, G., Degani, M., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30426-0 · Cited by 145
Cited by
Buried interface molecular hybrid for inverted perovskite solar cells
Liu, S., Li, J., Xiao, W., Chen, R., Sun, Z., Zhang, Y., Lei, X., Hu, S., Kober-Czerny, M., Wang, J., et al. (2024) · Nature · doi:10.1038/s41586-024-07723-3 · Cited by 1,090
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Self-citationHighly efficient and stable perovskite solar cells via a multifunctional hole transporting material
Zhou, J., Tan, L., Liu, Y., Li, H., Liu, X., Li, M., Wang, S., Zhang, Y., Jiang, C., Hua, R., et al. (2024) · Joule · doi:10.1016/j.joule.2024.02.019 · Cited by 735
Self-citationHomogenized NiO x nanoparticles for improved hole transport in inverted perovskite solar cells
Yu, S., Xiong, Z., Zhou, H., Zhang, Q., Wang, Z., Ma, F., Qu, Z., Zhao, Y., Chu, X., Zhang, X., et al. (2023) · Science · doi:10.1126/science.adj8858 · Cited by 672
Guan, S., Li, Y., Xu, C., Yin, N., Xu, C., Wang, C., Wang, M., Xu, Y., Chen, Q., Wang, D., et al. (2024) · Advanced Materials · doi:10.1002/adma.202400342 · Cited by 650
Self-citation
Metadata
- Authors
- Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., Yu, M., Yu, F., Zhang, Y., Wu, R., Liu, Z., Ning, Z., Neher, D., Han, L., Lin, Y., Tian, H., Chen, W., Stolterfoht, M., Zhang, L., Zhu, W.-H., & Wu, Y.
- Venue
- Science
- Published
- 2023-04-28
- Volume
- 380
- Issue
- 6643
- Pages
- 404-409
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4367173694
- Cited by
- 1,159
- References
- 48
- FWCI
- 84.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.