The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Shearing brittle intermetallics enhances cryogenic strength and ductility of steels
Abstract
Precipitates are crucial for crafting mechanically strong metallic materials. In this work, we report the dislocation cutting of B2 (ordered body-centered cubic) nanoprecipitates, typically considered nonshearable intermetallics, in a lightweight compositionally complex steel during cryogenic tensile loading. Shearing is enabled by the high strength level for dislocation glide within the austenitic matrix, attributed to the substantial strengthening from subnanoscale local chemical ordering zones and the pronounced solid solution strengthening from the multiprincipal elements in the matrix. This mechanism not only harnesses the intense strengthening and strain hardening provided by otherwise impenetrable brittle nanoprecipitates but also introduces ductility through their sequential shearing with ongoing deformation. Our steel thus showcases ultrahigh cryogenic tensile strength up to 2 gigapascal at a remarkable tensile elongation of 34%. This study reveals a new strategy for designing high-performance structural materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
(1962) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(62)91145-6 · Cited by 4,391
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Mechanical Behavior of Materials
Hosford, W. F. (2005) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810930 · Cited by 1,775
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Twinning-induced plasticity (TWIP) steels
De Cooman, B. C., Estrin, Y., & Kim, S. K. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.06.046 · Cited by 1,614
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Direct observation of chemical short-range order in a medium-entropy alloy
Chen, X., Wang, Q., Cheng, Z., Zhu, M., Zhou, H., Jiang, P., Zhou, L., Xue, Q., Yuan, F., Zhu, J., et al. (2021) · Nature · doi:10.1038/s41586-021-03428-z · Cited by 819
Gradient cell–structured high-entropy alloy with exceptional strength and ductility
Pan, Q., Zhang, L., Feng, R., Lu, Q., An, K., Chuang, A. C., Poplawsky, J. D., Liaw, P. K., & Lu, L. (2021) · Science · doi:10.1126/science.abj8114 · Cited by 795
Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX Steels
Frommeyer, G., & Brüx, U. (2006) · steel research international · doi:10.1002/srin.200606440 · Cited by 660
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S. (2017) · Nature Communications · doi:10.1038/ncomms15719 · Cited by 470
Nanoprecipitate‐Strengthened High‐Entropy Alloys
Liu, L., Zhang, Y., Han, J., Wang, X., Jiang, W., Liu, C., Zhang, Z., & Liaw, P. K. (2021) · Advanced Science · doi:10.1002/advs.202100870 · Cited by 393
Sohn, S. S., Hong, S., Lee, J., Suh, B.-C., Kim, S.-K., Lee, B.-J., Kim, N. J., & Lee, S. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.027 · Cited by 324
Clustering, nano-scale precipitation and strengthening of steels
Xiong, Z., Timokhina, I., & Pereloma, E. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100764 · Cited by 296
Wang, S., Wu, M., Shu, D., Zhu, G., Wang, D., & Sun, B. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.044 · Cited by 272
Self-citationFeng, R., Rao, Y., Liu, C., Xie, X., Yu, D., Chen, Y., Ghazisaeidi, M., Ungar, T., Wang, H., An, K., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23689-6 · Cited by 234
Zhang, D. D., Zhang, J. Y., Kuang, J., Liu, G., & Sun, J. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117981 · Cited by 232
He, Z. F., Jia, N., Ma, D., Yan, H. L., Li, Z. M., & Raabe, D. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.05.057 · Cited by 210
Self-citationAtomic faulting induced exceptional cryogenic strain hardening in gradient cell–structured alloy
Pan, Q., Yang, M., Feng, R., Chuang, A. C., An, K., Liaw, P. K., Wu, X., Tao, N., & Lu, L. (2023) · Science · doi:10.1126/science.adj3974 · Cited by 190
Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy
Bhattacharjee, T., Zheng, R., Chong, Y., Sheikh, S., Guo, S., Clark, I. T., Okawa, T., Wani, I. S., Bhattacharjee, P. P., Shibata, A., et al. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.023 · Cited by 158
Strengthening mechanisms in high entropy alloys: A review
Ali, N., Zhang, L., Liu, D., Zhou, H., Sanaullah, K., Zhang, C., Chu, J., Nian, Y., & Cheng, J. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104686 · Cited by 140
Effects of cryogenic temperature on tensile and impact properties in a medium-entropy VCoNi alloy
Yang, D. C., Jo, Y. H., Ikeda, Y., Körmann, F., & Sohn, S. S. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.02.034 · Cited by 119
Dasari, S., Sarkar, A., Sharma, A., Gwalani, B., Choudhuri, D., Soni, V., Manda, S., Samajdar, I., & Banerjee, R. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.071 · Cited by 111
Achieving high strength and ductility in Fe50Mn25Ni10Cr15 medium entropy alloy via Al alloying
Jiang, Z., Wei, R., Wang, W., Li, M., Han, Z., Yuan, S., Zhang, K., Chenchen, Wang, T., & Li, F. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.068 · Cited by 64
Kwon, H., Sathiyamoorthi, P., Karthik, G. M., Asghari‐Rad, P., Zargaran, A., Do, H.-S., Lee, B., Kato, H., & Kim, H. S. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.114157 · Cited by 55
Strong work-hardenable body-centered-cubic high-entropy alloys at cryogenic temperature
Wen, X., Zhu, L., Naeem, M., Huang, H., Jiang, S., Wang, H., Liu, X., Zhang, X., Wang, X., Wu, Y., et al. (2023) · Scripta Materialia · doi:10.1016/j.scriptamat.2023.115434 · Cited by 50
Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy
Górecki, K. M., Bala, P., Bednarczyk, W., & Kawałko, J. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.01.001 · Cited by 43
Wang, Y., Yuan, C., Zhang, B., Gao, X.-Y., Qiao, S., Wen, X., Chen, Y., & Wang, F. (2023) · Materials Characterization · doi:10.1016/j.matchar.2023.113422 · Cited by 22
Self-citationWang, D., Pei, B., Wang, Z. L., Niu, X., Bi, Z., Qiao, J., & Gan, B. (2023) · Intermetallics · doi:10.1016/j.intermet.2023.107836 · Cited by 12
Self-citation
Metadata
- Authors
- Wang, F., Song, M., Elkot, M. N., Yao, N., Sun, B., Song, M., Wang, Z., & Raabe, D.
- Venue
- Science
- Published
- 2024-05-31
- Volume
- 384
- Issue
- 6699
- Pages
- 1017-1022
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4399168002
- Cited by
- 253
- References
- 33
- FWCI
- 34.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.