The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Measurements of radiant emissive power and temperatures in crown fires
Abstract
This study presents spatially and temporally resolved measurements of air temperatures and radiant energy fluxes in a boreal forest crown fire. Measurements were collected 3.1, 6.2, 9.2, 12.3, and 13.8 m above the ground surface. Peak air temperatures exceeded 1330 °C, and maximum radiant energy fluxes occurred in the upper third of the forest stand and reached 290 kW·m2. Average radiant flux from the flames across all experiments was found to be approximately 200 kW·m2. Measured temperatures showed some variation with vertical height in the canopy. Equivalent radiometric temperatures calculated from radiant heat flux measurements exceeded thermocouple-based temperatures for all but the 10-m height, indicating that fire intensity estimates based on thermocouple measurements alone may result in underestimation of actual radiant intensity. The data indicate that the radiative energy penetration distance is significantly longer in the forest canopy than in the lower levels of the forest stand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A mathematical model for predicting fire spread in wildland fuels
Rothermel, R. C. (1972) · doi:10.2737/int-rp-115 · Cited by 2,247
FARSITE: Fire Area Simulator-model development and evaluation
Finney, M. A. (1998) · doi:10.2737/rmrs-rp-4 · Cited by 1,617
Relating flame radiation to home ignition using modeling and experimental crown fires
Cohen, J. D. (2004) · Canadian Journal of Forest Research · doi:10.1139/x04-049 · Cited by 167
Self-citation
Cited by
Remote sensing techniques to assess active fire characteristics and post-fire effects
Lentile, L. B., Holden, Z. A., Smith, A. M. S., Falkowski, M. J., Hudak, A. T., Morgan, P., Lewis, S. A., Gessler, P. E., & Benson, N. C. (2006) · International Journal of Wildland Fire · doi:10.1071/wf05097 · Cited by 969
Freeborn, P. H., Wooster, M. J., Hao, W. M., Ryan, C. A., Nordgren, B. L., Baker, S. P., & Ichoku, C. (2008) · Journal of Geophysical Research: Atmospheres · doi:10.1029/2007jd008679 · Cited by 255
Caton, S. E., Hakes, R. S. P., Gorham, D. J., Zhou, A., & Gollner, M. J. (2017) · Fire Technology · doi:10.1007/s10694-016-0589-z · Cited by 241
Fire Metrology: Current and Future Directions in Physics-Based Measurements
Kremens, R. L., Smith, A. M. S., & Dickinson, M. B. (2010) · Fire Ecology · doi:10.4996/fireecology.0601013 · Cited by 86
Home Survival in Wildfire-Prone Areas: Building Materials and Design Considerations
Quarles, S. L., Valachovic, Y., Nakamura, G. M., Nader, G. A., & de Lasaux, M. J. (2010) · doi:10.3733/ucanr.8393 · Cited by 73
Metadata
- Authors
- Butler, B. W., Cohen, J., Latham, D. J., Schuette, R. D., Sopko, P., Shannon, K. S., Jimenez, D., & Bradshaw, L. S.
- Venue
- Canadian Journal of Forest Research
- Publisher
- Canadian Science Publishing
- Published
- 2004-08-01
- Volume
- 34
- Issue
- 8
- Pages
- 1577-1587
- ISSN
- 0045-5067 (ISSN-L)
- 1208-6037
- OpenAlex
- W2027605665
- Cited by
- 169
- References
- 3
- FWCI
- 5.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurements of radiant emissive power and temperatures in crown fires. https://app.cochat.ai/papers/10.1139/x04-060
- The paper
- Butler, B. W., Cohen, J., Latham, D. J., Schuette, R. D., Sopko, P., Shannon, K. S., Jimenez, D., & Bradshaw, L. S. (2004). Measurements of radiant emissive power and temperatures in crown fires. Canadian Journal of Forest Research. https://doi.org/10.1139/x04-060
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.