The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW
Abstract
To overcome the diffraction constraints of traditional optical lithography, the next generation lithographies (NGLs) will utilize any one or more of EUV (extreme ultraviolet), X-ray, electron or ion beam technologies to produce sub-100 nm features. Perhaps the most under-developed and under-rated is the utilization of ions for lithographic purposes. All three ion beam techniques, FIB (Focused Ion Beam), Proton Beam Writing (p-beam writing) and Ion Projection Lithography (IPL) have now breached the technologically difficult 100 nm barrier, and are now capable of fabricating structures at the nanoscale. FIB, p-beam writing and IPL have the flexibility and potential to become leading contenders as NGLs. The three ion beam techniques have widely different attributes, and as such have their own strengths, niche areas and application areas. The physical principles underlying ion beam interactions with materials are described, together with a comparison with other lithographic techniques (electron beam writing and EUV/X-ray lithography). IPL follows the traditional lines of lithography, utilizing large area masks through which a pattern is replicated in resist material which can be used to modify the near-surface properties. In IPL, the complete absence of diffraction effects coupled with ability to tailor the depth of ion penetration to suit the resist thickness or the depth of modification are prime characteristics of this technique, as is the ability to pattern a large area in a single brief irradiation exposure without any wet processing steps. p-beam writing and FIB are direct write (maskless) processes, which for a long time have been considered too slow for mass production. However, these two techniques may have some distinct advantages when used in combination with nanoimprinting and pattern transfer. FIB can produce master stamps in any material, and p-beam writing is ideal for producing three-dimensional high-aspect ratio metallic stamps of precise geometry. The transfer of large scale patterns using nanoimprinting represents a technique of high potential for the mass production of a new generation of high area, high density, low dimensional structures. Finally a cross section of applications are chosen to demonstrate the potential of these new generation ion beam nanolithographies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<550::aid-anie550>3.0.co;2-g · Cited by 4,285
The Stopping and Range of Ions in Matter
Ziegler, J. F., & Biersack, J. P. (1985) · Treatise on Heavy-Ion Science · doi:10.1007/978-1-4615-8103-1_3 · Cited by 3,984
Piner, R. D., Zhu, J., Xu, F., Hong, S., & Mirkin, C. A. (1999) · Science · doi:10.1126/science.283.5402.661 · Cited by 3,052
The Stopping and Ranges of Ions in Matter
(1980) · Elsevier eBooks · doi:10.1016/c2013-0-02882-4 · Cited by 2,983
Induced Magnetic Ordering by Proton Irradiation in Graphite
Esquinazi, P., Spemann, D., Höhne, R., Setzer, A., Han, K.-H., & Butz, T. (2003) · Physical Review Letters · doi:10.1103/physrevlett.91.227201 · Cited by 815
A review of focused ion beam applications in microsystem technology
Reyntjens, S., & Puers, R. (2001) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/11/4/301 · Cited by 683
Dynamics of ferroelastic domains in ferroelectric thin films
Nagarajan, V., Roytburd, A., Stanishevsky, A., Prasertchoung, S., Zhao, T., Chen, L., Melngailis, J., Auciello, O., & Ramesh, R. (2003) · Nature Materials · doi:10.1038/nmat800 · Cited by 569
The National University of Singapore high energy ion nano-probe facility: Performance tests
Watt, F., van Kan, J. A., Rajta, I., Bettiol, A. A., Choo, T. F., Breese, M. B. H., & Osipowicz, T. (2003) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(03)01003-6 · Cited by 174
Self-citationHovington, P., Drouin, D., Gauvin, R., Joy, D. C., & Evans, N. D. (1997) · Scanning · doi:10.1002/sca.4950190104 · Cited by 165
Three-dimensional nanolithography using proton beam writing
van Kan, J. A., Bettiol, A. A., & Watt, F. (2003) · Applied Physics Letters · doi:10.1063/1.1604468 · Cited by 159
Self-citation
Cited by
Nanostructured Plasmonic Sensors
Stewart, M. E., Anderton, C. R., Thompson, L. B., Maria, J., Gray, S. K., Rogers, J. A., & Nuzzo, R. G. (2008) · Chemical Reviews · doi:10.1021/cr068126n · Cited by 2,415
A review on the processing accuracy of two-photon polymerization
Zhou, X., Hou, Y., & Lin, J. (2015) · AIP Advances · doi:10.1063/1.4916886 · Cited by 422
Bioinspired Adhesive Architectures: From Skin Patch to Integrated Bioelectronics
Baik, S., Lee, H. J., Kim, D. W., Kim, J. W., Lee, Y., & Pang, C. (2019) · Advanced Materials · doi:10.1002/adma.201803309 · Cited by 302
Evolution in Lithography Techniques: Microlithography to Nanolithography
Sharma, E., Rathi, R., Misharwal, J., Sinhmar, B., Kumari, S., Dalal, J., & Kumar, A. (2022) · Nanomaterials · doi:10.3390/nano12162754 · Cited by 257
Whole-cell biochips for bio-sensing: integration of live cells and inanimate surfaces
Ben-Yoav, H., Melamed, S., Freeman, A., Shacham-Diamand, Y., & Belkin, S. (2011) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2010.532767 · Cited by 52
Metadata
- Authors
- WATT, F., BETTIOL, A. A., VAN KAN, J. A., TEO, E. J., & BREESE, M. B. H.
- Venue
- International Journal of Nanoscience
- Publisher
- World Scientific Pub Co Pte Lt
- Published
- 2005-06
- Volume
- 04
- Issue
- 03
- Pages
- 269-286
- ISSN
- 0219-581X (ISSN-L)
- 1793-5350
- OpenAlex
- W2168793632
- Cited by
- 296
- References
- 16
- FWCI
- 8.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW. https://app.cochat.ai/papers/10.1142/s0219581x05003139
- The paper
- WATT, F., BETTIOL, A. A., VAN KAN, J. A., TEO, E. J., & BREESE, M. B. H. (2005). ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW. International Journal of Nanoscience. https://doi.org/10.1142/s0219581x05003139
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.