Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 422

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Current Developments and Prospective of Lead-Free Piezoelectric Ceramics

Takenaka, Tadashi, Nagata, Hajime, Hiruma, Yuji · 2008 · Japanese Journal of Applied Physics

Abstract

The dielectric, ferroelectric and piezoelectric properties of perovskite ferroelectric and bismuth layered-structured ferroelectric (BLSF) ceramics are described being superior candidates for lead-free piezoelectric materials to reduce environmental damage. Perovskite-type ceramics seem to be suitable for actuator and high-power applications that require a large piezoelectric constant, d 33 , and a high Curie temperature, T c , or a depolarization temperature, T d (>200 °C). For BaTiO 3 -based solid solutions, (1- x )BaTiO 3 – x (Bi 0.5 K 0.5 )TiO 3 (BT–BKT100 x ) ceramics, T c increases with increasing amount of x . The BT–BKT20 + MnCO 3 (0.1 wt %) ceramic shows a high T c greater than 200 °C and an electromechanical coupling factor of k 33 =0.35. In the case of a (Bi 1/2 Na 1/2 )TiO 3 – b (Bi 1/2 K 1/2 )TiO 3 – c BaTiO 3 [BNBK (100 a /100 b /100 c )] solid solution ceramics, d 33 is 191 pC/N for BNBK (85.2/2.8/12). KNbO 3 (KN)-based ceramics are also a candidate for lead-free piezoelectrics. In Mn-doped KN ceramics, a higher k 33 of 0.507 is obtained for KN + MnCO 3 (0.1 wt %). On the other hand, BLSF ceramics seem to be excellent candidates as piezoelectric sensors for high temperatures and ceramic resonators with a high mechanical quality factor, Q m , and a low temperature coefficient of resonance frequency, TC-f . The k 33 value of the donor (Nb)-doped and grain-oriented (HF) Bi 4 Ti 3- x Nb x O 12 (BITN- x ) ceramic is 0.39 for x =0.08 and is able to keep the same stable value up to 350 °C. Nd(0.01) and V(0.75) co-doped Bi 4 Ti 3 O 12 ceramics, BNTV(0.01, 0.75), show a relatively low TC-f . Bi 3 TiTaO 9 (BTT)-based solid solution, Sr x -1 Bi 4- x Ti 2- x Ta x O 9 [SBTT2( x )] (1≦ x ≦2), displays the high Q m value (=13500) in (p)-mode at x =1.25. For resonator applications, (Sr 1- x Ca x ) 2 Bi 4 Ti 5 O 18 (SCBT) (0≦ x ≦0.5) ceramics are suitable.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1143/jjap.47.3787

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 422

Metadata

Authors
Takenaka, T., Nagata, H., & Hiruma, Y.
Venue
Japanese Journal of Applied Physics
Published
2008-05-01
Volume
47
Issue
5S
Pages
3787
ISSN
  • 0021-4922 (ISSN-L)
  • 1347-4065
OpenAlex
W2004549435
Cited by
422
References
17
FWCI
12.13
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.